Free-Standing β-Ga<Subscript>2</Subscript>O<Subscript>3</Subscript> Thin Diaphragms

Free-standing, very thin, single-crystal β-gallium oxide (β-Ga₂O₃) diaphragms have been constructed and their dynamical mechanical properties characterized by noncontact, noninvasive optical measurements harnessing the multimode nanomechanical resonances of these suspended nanostructures. We synthesized single-crystal β-Ga₂O₃ using low-pressure chemical vapor deposition (LPCVD) on a 3C-SiC epilayer grown on Si substrate at temperature of 950°C for 1.5 h. The synthesized single-crystal nanoflakes had widths of ～ 2 μm to 30 μm and thicknesses of ～ 20 nm to 140 nm, from which we fabricated free-standing circular drumhead β-Ga₂O₃ diaphragms with thicknesses of ～ 23 nm to 73 nm and diameters of ～ 3.2 μm and ～ 5.2 μm using a dry stamp-transfer technique. Based on measurements of multiple flexural-mode mechanical resonances using ultrasensitive laser interferometric detection and performing thermal annealing at 250°C for 1.5 h, we quantified the effects of annealing and adsorption of atmospheric gas molecules on the resonant characteristics of the diaphragms. Furthermore, we studied the effects of structural nonidealities on these free-standing β-Ga₂O₃ nanoscale diaphragms. We present extensive characterization of the mechanical and optical properties of free-standing β-Ga₂O₃ diaphragms, paving the way for realization of resonant transducers using such nanomechanical structures for use in applications including gas sensing and ultraviolet radiation detection.     

前进中的晶圆级3D集成

3D集成能够在减小芯片尺寸的同时缓解互连延迟问题。根据IC设计是否针对3D互连,本文介绍了三种不同的选择方案。     

Serial and Parallel FPGA-based Variable Block Size Motion Estimation Processors

H.264/AVC is the latest video coding standard adopting variable block size motion estimation (VBS-ME), quarter-pixel accuracy, motion vector prediction and multi-reference frames for motion estimation. These new features result in much higher computation requirements than previous coding standards. In this paper we propose a novel most significant bit (MSB) first bit-serial architecture for full-search block matching VBS-ME, and compare it with systolic implementations. Since the nature of MSB-first processing enables early termination of the sum of absolute difference (SAD) calculation, the average hardware performance can be enhanced. Five different designs, one and two dimensional systolic and tree implementations along with bit-serial, are compared in terms of performance, pixel memory bandwidth, occupied area and power consumption.

Health and wellness monitoring through wearable and ambient sensors: exemplars from home-based care of elderly with mild dementia

Monitoring and timely intervention are extremely important in the continuous management of health and wellness among all segments of the population, but particularly among those with mild dementia. In relation to this, we prescribe three design principles for the construction of services and applications. These are ambient intelligence, service continuity, and micro-context. In this paper, we provide three exemplars from our research and development activities that illustrate the use of these design principles in the construction of services and applications. All the applications are drawn from the field of care for mild dementia patients in their living quarters.     

MIMO Channel Characterization for Short Range Fixed Wireless Propagation Environments

This paper reports results from wideband MIMO measurements performed in short range fixed wireless environments at 5.2 GHz. The objective is to provide MIMO channel characterization results for the measured environments and contribute to the limited available similar studies. Two kinds of propagation scenarios are investigated, rooftop to rooftop and street to rooftop, at three different sites always under LOS propagation conditions. The analysis of measurement data is performed in the context of non physical modeling, providing insight into the statistics of the measured channels. In particular, the slow time varying nature of the channel is studied and the narrow Doppler spectrum shape is approximated. Furthermore, frequency correlation results are obtained and the typical delay dispersion measures are extracted. Then, the antenna correlation is studied and the error of the Kronecker product approximation is evaluated. Finally, capacity results are provided and the channel measurements are characterized in terms of spatial multiplexing quality and multipath richness through condition number analysis. Nikolaos D. Skentos received his Diploma in Electrical and Computer Engineering from the National Technical University of Athens (NTUA), Greece in October 2000. Since January 2001 he has been a research associate at the Mobile Radio Communications Laboratory at the NTUA, and he is currently working towards the Ph.D. degree. His research interests include channel measurements, MIMO channel characterization, MIMO algorithms and space time processing. He has been active in the IST STINGRAY project, the COST 273 Action and the ACE Network of Excellence. He is also a member of the National Technical Chamber of Greece since 2001. Athanasios G. Kanatas received the Diploma in Electrical Engineering from the National Technical University of Athens, Greece, in 1991, the M.Sc. degree in Satellite Communication Engineering from the University of Surrey, Surrey, UK in 1992, and the Ph.D. degree in Mobile Satellite Communications from the National Technical University of Athens, Greece in February 1997. From 1993 to 1994 he was with National Documentation Center of National Research Institute. In 1995 he joined SPACETEC Ltd. where he was Technical Project Manager for VISA/EMEA VSAT Project in Greece. In 1996 he joined the Mobile Radio Communications Laboratory as a research associate. From 1999 to 2002 he was with the Institute of Communication & Computer Systems. In 2000 he became a member of the Board of Directors of OTESAT S.A. He is an Assistant Professor in the Department of Technology Education and Digital Systems at University of Piraeus. His current research interests include channel characterization and estimation, simulation and modeling for mobile, mobile satellite, and future wireless communication systems. He has been a Senior Member of IEEE since 2002, and is also a member of the Technical Chamber of Greece. In 1999 he was elected Chairman of the Communications Society of the Greek IEEE Section. Panagiotis I. Dallas was born 1967 in Thessaloniki, Greece. He obtained his diploma and Ph.D. degree from the Electrical and Computer Engineering Department of Aristotle University of Thessaloniki, Greece, in 1990 and 1997, respectively. Since 1998 he joined with INTRACOM where he currently is Section Manager of Advanced Communications Technologies branch of Emerging Technologies & Markets department, leading the next generation of broadband wireless access systems for internal and EU projects. He runs the relevant standardization activities (IEEE 802.16 and ETSI/BRAN HIPERMAN) in INTRACOM and he represents the company in WiMAX forum. Finally, he has over 30 publications in international journals and conferences. Philip Constantinou received the Diploma in Physics from the National University of Athens in 1972, the Master of Applied Science in Electrical Engineering from the University of Ottawa, Ontario, Canada in 1976, and the Ph.D. degree in Electrical Engineering in 1983 from Carleton University, Ottawa, Ontario, Canada. From 1976 to 1979 he was with Telesat Canada as a Communications System Engineer. In 1980 he joined the Ministry of Communications in Ottawa, Canada where he was engaged in the area of Mobile Communication. From 1984 to 1989 he was with the National Research Center Demokritos in Athens, Greece where he was involved in several research projects in the area of Mobile Communications. In 1989 he joined the National Technical University of Athens where he is currently a Professor and Director of the Mobile Radio Communications Laboratory. His current research interests include Personal Communications, Mobile Satellite Communications, and Interference Problems on Digital Communications Systems.     

Tailoring Electron‐Transfer Barriers for Zinc Oxide/C60 Fullerene Interfaces

The interfacial electronic structure between oxide thin films and organic semiconductors remains a key parameter for optimum functionality and performance of next‐generation organic/hybrid electronics. By tailoring defect concentrations in transparent conductive ZnO films, we demonstrate the importance of controlling the electron transfer barrier at the interface with organic acceptor molecules such as C₆₀. A combination of electron spectroscopy, density functional theory computations, and device characterization is used to determine band alignment and electron injection barriers. Extensive experimental and first principles calculations reveal the controllable formation of hybridized interface states and charge transfer between shallow donor defects in the oxide layer and the molecular adsorbate. Importantly, it is shown that removal of shallow donor intragap states causes a larger barrier for electron injection. Thus, hybrid interface states constitute an important gateway for nearly barrier‐free charge carrier injection. These findings open new avenues to understand and tailor interfaces between organic semiconductors and transparent oxides, of critical importance for novel optoelectronic devices and applications in energy‐conversion and sensor technologies.     

Automatic classification of heartbeats using ECG morphology and heartbeat interval features

A method for the automatic processing of the electrocardiogram (ECG) for the classification of heartbeats is presented. The method allocates manually detected heartbeats to one of the five beat classes recommended by ANSI/AAMI EC57:1998 standard, i.e., normal beat, ventricular ectopic beat (VEB), supraventricular ectopic beat (SVEB), fusion of a normal and a VEB, or unknown beat type. Data was obtained from the 44 nonpacemaker recordings of the MIT-BIH arrhythmia database. The data was split into two datasets with each dataset containing approximately 50,000 beats from 22 recordings. The first dataset was used to select a classifier configuration from candidate configurations. Twelve configurations processing feature sets derived from two ECG leads were compared. Feature sets were based on ECG morphology, heartbeat intervals, and RR-intervals. All configurations adopted a statistical classifier model utilizing supervised learning. The second dataset was used to provide an independent performance assessment of the selected configuration. This assessment resulted in a sensitivity of 75.9%, a positive predictivity of 38.5%, and a false positive rate of 4.7% for the SVEB class. For the VEB class, the sensitivity was 77.7%, the positive predictivity was 81.9%, and the false positive rate was 1.2%. These results are an improvement on previously reported results for automated heartbeat classification systems.     

Quantification of Temperature-Dependent Charge Separation and Recombination Dynamics in Non-Fullerene Organic Photovoltaics

Transient optical spectroscopy is used to quantify the temperature-dependence of charge separation and recombination dynamics in P3TEA:SF-PDI₂ and PM6:Y6, two non-fullerene organic photovoltaic (OPV) systems with a negligible driving force and high photocurrent quantum yields. By tracking the intensity of the transient electroabsorption response that arises upon interfacial charge separation in P3TEA:SF-PDI₂, a free charge generation rate constant of ≈2.4 × 10¹⁰ s⁻¹ is observed at room temperature, with an average energy of ≈230 meV stored between the interfacial charge pairs. Thermally activated charge separation is also observed in PM6:Y6, and a faster charge separation rate of ≈5.5 × 10¹⁰ s⁻¹ is estimated at room temperature, which is consistent with the higher device efficiency. When both blends are cooled down to cryogenic temperature, the reduced charge separation rate leads to increasing charge recombination either directly at the donor-acceptor interface or via the emissive singlet exciton state. A kinetic model is used to rationalize the results, showing that although photogenerated charges have to overcome a significant Coulomb potential to generate free carriers, OPV blends can achieve high photocurrent generation yields given that the thermal dissociation rate of charges outcompetes the recombination rate.     

Photonic crystal-based permutation switch for optical networks

We present, for the first time, the design of a low-cross talk scalable permutation switch employing photonic crystal ring resonators in an optical network. Through this novel approach, the transition between different states of the \(2 \times 2\) optical switch, as the basic element, is achieved by applying different operating wavelengths. Subsequently, the shuffling mechanisms in \(3 \times 3\) and \(4 \times 4\) optical networks are realized by controlling the position of photonics crystal ring resonators. Lowest cross talk levels of 6 and 5% are obtained for “bar” and “cross” switching states, respectively.