基于最优乘子潮流估计的故障筛选与排序

提出了一种用于电压稳定安全评估的快速故障筛选和排序方法。该方法从故障前的临界点出发,通过最优乘子潮流法计算得到的故障后边界点来估计故障后临界点,当初始点接近临界点,通过一次迭代即可满足所需的计算精度,从而快速地识别出非严重故障。对于严重故障和某些特殊情况的故障进行了分析并提出了解决办法,保证了对严重故障的估计精度。通过某一实际703节点系统算例验证了该方法的有效性。     

Development of High Deformability Pipeline Steel

Based on strain-based design, high deformability X70 high strength pipeline steel with dual-phase microstructure has been developed, which can be laid in the seismic, the cold or the deepwater region. The results illustrated that the developed X70 steel has the stress-strain curve like round house and it shows good anti-transformation characteristic, high uniform deformation(≥10%), enhanced n-value(≥0.10), and the low yield-tensile ratio Y/T(≤0.85). The dual-phase microstructure of ferrite and bainite conta...     

Effects of the porcelain-fused-to-metal firing process on the surface and corrosion of two Co–Cr dental alloys

The aim of this study was to evaluate the effects of a simulated porcelain-fused-to-metal (PFM) firing process on the surface, corrosion behavior, and cell culture response of two cobalt–chromium (Co–Cr) dental alloys. Two Co–Cr dental alloys were tested—a high and a low molybdenum (Mo)-containing alloys. Before PFM firing, as-cast alloy specimens were examined for their microstructure, surface composition, and hardness. Corrosion behavior was evaluated using electrochemical impedance spectroscopy tests. Mouse 3T3 fibroblasts were exposed indirectly to specimens and MTT cell proliferation assays were performed after 3 and 6 days. The cell culture medium exposed to specimens was analyzed for metal ion release. After firing, similar alloy specimens were examined for the same properties. The tests showed that the PFM firing changed both alloys’ microstructures and hardness values. After PFM firing, the corrosion resistance of the low Mo-containing Co–Cr alloy decreased statistically, which corresponded with a reduction of Cr and oxygen levels in the surface oxides via X-ray photoelectron spectroscopy. Also, the MTT assay of this alloy decreased significantly corresponding with an obvious increase of Co release after the firing. For the high Mo-containing Co–Cr alloy, the surface composition, corrosion resistance, and cell culture response were not significantly changed after PFM firing. The results suggested that the corrosion resistance and biocompatibility of the low Mo-containing Co–Cr alloy decreased after PFM firing, whereas the firing process had little effect on the same properties of the high Mo-containing Co–Cr alloy.     

The effect of roll-processing orientation on stress corrosion cracking of warm-rolled 304L stainless steel in oxygenated and deoxygenated high temperature pure water

Stress corrosion crack growth rates of 304L stainless steel after one-directionally warm-rolled along the longitudinal (L) direction were measured in oxygenated and deoxygenated pure water at 288 °C. The fracture mode is mainly intergranular in the Transverse-longitudinal (T-L) orientation specimen, while it is occasionally intergranular in the Longitudinal-transverse (L-T) orientation specimen. The crack growth rates in the T-L orientation are higher than those in the L-T orientation in both oxygenated and deoxygenated environments, which is related to the effective cracking growth path as the result of microstructural anisotropy and applied loading direction.     

冰箱聚氨酯环戊烷高压发泡模塑生产成套设备的安全要点

介绍了以环戊烷为发泡剂的冰箱高压发泡模塑生产成套设备的安全设计原则和具体实施内容,重点介绍了环戊烷/多元醇预混系统、聚氨酯环戊烷高压发泡机和聚氨酯冰箱发泡模塑生产线的安全要点。     

浅析北京郊区公路绿化的现状与发展

以城、郊为界将北京公路绿化状况分为两部分,并进行了分析比较,从而找出两者现状差异,并根据效区公路绿化中的不足,从提高认识、加大投入、合理设计、科学养护4个方面找到解决问题的方法。     

建筑施工中常见问题及预防措施

对建筑工程施工中易被忽视的几种问题进行探讨,并提出了相应的预防措施.     

基于PLC控制的锅炉燃烧系统设计

通过PLC工业燃油锅炉燃烧控制系统的设计,讨论PLC控制系统中数据的采集、处理及相关的接口电路的软硬件结构应用设计。设计充分考虑了系统的抗干扰对策,实现锅炉燃烧系统控制工作稳定可靠,满足控制精度的要求。     

图书馆馆员心理问题成因及对策的质性分析

心理健康是图书馆馆员生活质量和工作效率的重要影响因素,良好的心理素质是开展高绩效图书馆工作的内在基础.以330名在校图书馆馆员为测试对象,采用开放式调查问卷的形式,依据扎根理论,使用不断比较的质性研究方法探讨馆员心理健康的标准、心理问题成因,并提出了解决心理问题的对策.