ZrO2增韧Al2O3／SiCnano复合陶瓷的力学性能及微结构

本文对Al_2O_3/SiC nano ZrO_2(3Y)复相陶瓷的力学性能和微结构进行了研究,探讨了ZrO_2(t)应力诱导相交增韧机制和纳米粒子增韧机制相互迭加的可能性。结果表明:适量的第二相纳米粒子ZrO_2(3Y)加入对材料的微结构有很大影响,同时对材料的力学性能的提高作出贡献。     

国内外无机颜料工业的现状及发展趋势

阐述了国内外无机颜料的生产及需求现状,预测了无机颜料工业的发展趋势、产品发展方向,提出了发展我国无机颜料工业的策略。     

水流掺气对明流泄洪洞及挑坎水力特性的影响

水流充分掺气可以避免高流速泄洪设施发生空蚀,但也会改变相关水力特性。通过对某大坝泄洪洞掺气设施水力模型试验及关于水流表面自掺气发生条件的相关分析,提出了在全程流速超过38 m/s,长度达550 m的明流洞内仅布置一级掺气设施的建议,较通常情况减少了两级;并针对泄洪洞出流方向与河道流向交角达60°的特点,研究提出了一种大差动异型鼻坎消能工。水工模型试验成果表明,其挑流水舌沿河道纵向扩散良好,水舌外缘与河道对岸保持了30 m以上的安全距离。该泄洪洞建成后经历了高水头、较长时间的泄洪运行,明流洞和鼻坎消能工均无空蚀发生,但挑坎水舌却冲刷到对岸边坡。     

提高产品合格粒级产率的试验研究

扼要介绍了某选厂碎磨试验研究的情况．并根据研究结论，提出了该厂技术改造应当采用的流程与设备方案，以提高产品合格粒级产率。     

关于冶金学中使用国际单位制若干问题的探讨

本文就十余年来我国在冶金学领域使用国际单位制所遇到的问题，特别是关于热量和压力单位等问题，提出一些不同的意见；期望在冶金领域中使用国际单位更加顺利，又不要影响数据的精确性．     

透辉石瓷砖的研制

用透辉石新型节能陶瓷原料生产瓷砖的工艺技术关键与开拓应用。     

Zinc hydroxystannate and zinc stannate as flame‐retardant agents for flexible poly(vinyl chloride)

The flame‐retardant and smoke‐suppressant properties of inorganic tin compounds such as zinc hydroxystannate (ZHS) and zinc stannate (ZS) were investigated in a comparison with alumina trihydrate, magnesium hydroxide, and Sb₂O₃ through the limiting oxygen index test and smoke density test. The flame‐retardant mechanisms were studied through the char yield test, SEM, quantitative analysis, thermogravimetry and differential thermal analysis. The thermal degradation in air of flexible PVC treated with the above compounds was studied by thermal analysis from ambient temperature to 800°C. The results showed that tin compounds such as ZHS and ZS could be used as a highly effective flame retardant for flexible PVC, and it appears that the tin compound may exert its action in both the condensed and vapor phases, but mainly in condensed phases as a Lewis acid. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 98: 1469–1475, 2005     

Bulk polymerization of styrene in the presence of organomodified montmorillonite

The effect of montmorillonite (Cloisite 6A) on the bulk polymerization of styrene initiated by benzoyl peroxide (BPO) was studied by the dilatometric determination of the polymerization rates. The bulk polymerization rates increased as the montmorillonite input quantity increased. The effect became greater when the BPO concentration decreased. Under the assumption that clay participated in the radical initiation reaction of the chains, the reaction orders for clay and BPO were determined to be approximately 1.0 and 0.5, respectively. X‐ray diffraction and thermogravimetric analysis studies showed that the structure and properties of the obtained polystyrene (PS)/montmorillonite nanocomposites were greatly affected by the BPO concentration. With lower BPO concentrations, a larger interlayer distance and a higher extent of delamination for the clay were observed in the obtained PS/montmorillonite nanocomposites. The nanocomposites prepared with lower BPO concentrations also showed higher heat‐decomposition‐resistance temperatures. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 96: 1146–1152, 2005     

Degradation of acrylonitrile–ammonium itaconate copolymers

Acrylonitrile–ammonium itaconate copolymers were prepared by H₂O/dimethyl formamide suspension polymerization technique. Differential scanning calorimetry results of the degradation of acrylonitrile–ammonium itaconate copolymers in air are presented. The apparent activation energy of degradation of the copolymer was calculated using the Kissinger method. Effects of copolymerization conditions on the apparent activation energy of copolymer were studied. Increasing the dimethyl formamide concentration in the solvent mixture leads to a rapid increase in the degradation apparent activation energy of acrylonitrile–ammonium itaconate copolymer. The value of the degradation apparent activation energy of the copolymer synthesized in dimethyl formamide solvent increases up to 168.3 kJ mol^?1. The apparent activation energy decreases quickly along with an increase in ammonium itaconate concentration, and this change becomes less prominent as the weight ratio of ammonium itaconate/acrylonitrile goes beyond 6/94, ΔE_a = 89.4 ± 2.0 kJ mol^?1. The apparent activation energy shows a trend of increase with increasing copolymerization temperature. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 98: 1708–1711, 2005     

幂律流体三维脉动流场数值模拟

利用ANSYS软件，模拟了振动诱导单螺杆挤出机熔体输送段中非牛顿幂律流体的三维脉动流场，得到了三维脉动流场的瞬时速度分布及螺槽中物料的流动轨迹。结果表明，在脉动流场作用下，非牛顿流体的瞬时速度响应与在驱动壁面上所施加的正弦形式的脉动驱动形式不同，横螺槽方向的环流中心位置受幂律指数影响，且发生周期性改变。振动的引入使得在相同的时间内，物料的流动路程增加，且可增大物料的平均停留时间，有利于改善混合效果。