Kinetics of phenol oxidation in a trickle bed reactor over active carbon catalyst

The wet air oxidation of phenol over a commercial active carbon catalyst was studied in a trickle bed reactor (TBR) in the temperature and oxygen partial pressure ranges of 120–160 °C and 0.1–0.2 MPa, respectively. The performance of the active carbon was compared in terms of phenol and COD destruction. The weight change of active carbon due to reaction was also measured. Finally, oxic phenol adsorption isotherms were assessed in batch conditions at 25, 125 and 160 °C. In order to use the conversion data obtained from the TBR for a kinetic study, special care was taken to check the kinetic control in the TBR experiments. Several kinetic models including power law or Langmuir–Hinshelwood expressions were considered to describe the catalytic oxidation of phenol over active carbon. The simple power law model with first order dependence on both phenol and oxygen concentration predicted satisfactorily the experimental data not only over the entire range of operating conditions studied, but also outside its validity range. Copyright © 2005 Society of Chemical Industry     

6-Phospho-{beta}-galactosidases of Gram-positive and 6-phospho-{beta}-glucosidase B of Gram-negative bacteria: comparison of structure and function by kinetic and immunological methods and mutagenesis of the lacG gene of staphylococcus aureus

The 6-phospho-ß-galactosidase of Staphylococcus aureus,Lactococcus lactis and Lactobacillus casei and 6-phospho-ßglucosidaseB of Escherichia coli build a subfamily inside a greater enzymefamily, named the glycosal hydrolase family 1, which, hi addition,contains nine ß-glycosidases of different origins.Kinetic and immunological evidence is provided in this reportwhich strengthens the relationship of the four 6-phospho-ß-glycosidases.It is shown that the 6-phospho-ß-galactosidases and6-phospho-ß-glucosidase B are able to split aromaticß-galactoside phosphates and ß-glucosidephosphates. The turnover numbers of hydrolysis of substrateswith different epimerization at C-4 of the glycon vary up to15-fold only. Two polydonal antisera, one derived against thenative 6-phospho-ß-galactosidase from S.aureus andthe other derived against the 6-phospho-ß-glucosidaseB, cross-reacted with both enzymes. Peptides of the proteinswere separated by reverse phase HPLC. The cross-reacting peptideswere sequenced and shown to be localized at almost the sameposition in the aligned primary structures of both enzymes.An insertion of nine amino adds near these antigenic domainsis unique for the 6-phospho-ß-glycosidases and missingwithin the sequences of the ß-glycoside-specific membersof the family. The lacG gene of a 6-phospho-ß-galactosidasenegative S.aureus mutant was doned into E.coli and sequenced.In the totally inactive mutant protein only the glycine at position332 was changed to an arginine. This amino acid is part of thesequence insertion near the antigenic domain reacting with bothantisera. These data support the assumption that the regionis of great importance for the function of the enzymes and thatit is possible it determines the specificity of the phosphorylatedform of the substrates. In addition, the 6-phospho-ß-galactosidaseof S.aureus was modified by sitedirected mutagenesis of thecorresponding lacG gene hi order to replace residues Glul60and Glu375, which were suspected of being involved hi the generalacid catalysis of substrate hydrolysis, with glutamine residues.The mutant protein 160EQ retained some catalytic activity whilethe protein 375EQ was totally inactive. Glu375 is the activesite nudeophile of the 6-phospho-ß-galactosidase ofS.aureus. It is located in the sequence motif ENG where Glu358was identified as the catalytkally active nudeophile hi theß-glucosidase of Agrobacterium.     

HihO: accelerating artificial intelligence interpretability for medical imaging in IoT applications using hierarchical occlusion

Neural Computing and Applications - In the medical imaging domain, nonlinear warping has enabled pixel-by-pixel mapping of one image dataset to a reference dataset. This co-registration of data...     

Methods for the determination of cyclopropenoid fatty acids. VII. The dilution-HBr-titration technique as a general method

The stepwise HBr titration method for the cyclopropenoid analysis of cottonseed oils is subject to serious inaccuracies when applied to samples containing higher cyclopropenoid concentrations, particularly if they contain appreciable amounts of alumina-adsorbable materials. A modification of the method is described which eliminates these sources of error. Its validity has been established by the analysis of a wide range of synthetic compositions including compositions containing massive amounts of interfering HBr-reactive substances and other alumina-adsorbable materials. The method with further modification can be used to analyze glycerides with the same high degree of accuracy. Presented at the AOCS Meeting in Houston, April 1965. So. Utiliz. Res. Dev. Div., ARS, USDA.     

Epoxy fatty acid ester plasticizers. Preparation and properties

Summary The preparation of epoxy fatty acid ester plasticizers has been reviewed. These plasticizers can be prepared by epoxidation reactions, utilizing a preformed peracid or anin-situ technique. A newin-situ epoxidation process, utilizing hydrogen peroxide and acetic acid in the presence of strong acid catalyst, has been described. Excellent conversions to epoxide have been achieved with a series of monounsaturated and polyunsaturated esters. Epoxy fatty acid esters are excellent plasticizers for vinyl resins. Their performance in a series of additional epoxy plasticizers of vegetable and marine origin is described. Novel epoxy plasticizers based upon mixed acetylated mono- and di-glyceride have been prepared and are found to have excellent plasticizer performance. Presented at the 28th fall meeting, American Oil Chemists’ Society, October 1954, Minneapolis, Minn.     

Mechanical Behavior of Several Hybrid Ceramic-Matrix-Composite Laminates

Several different hybrid laminated composites comprised of alternating layers of dense ceramic sheets (either SiC or Si₃N₄) and fiber-reinforced ceramic-matrix-composite (CMC) layers (Nicalon fibers with either glass or glass-ceramic matrices) have been fabricated and characterized. The effects of the reinforcement architecture (unidirectional vs cross-ply) and the relative volume fractions of the phases on the tensile and flexural properties have been examined. Comparisons have been made with the properties of the constituent layers. Rudimentary models have been developed to describe the onset of cracking and for the minimum volume fraction of CMC required to develop multiple cracks and thus obtain a high failure strain.     

Preparation and characterization of a number of amine salts of long-chain fatty acids

Summary Eighty-eight amine salts of long-chain fatty acids have been prepared, purified by solvent crystallization, and characterized. Forty-five of these were salts of palmitic acid. The rest included salts of capric, lauric, myristic, stearic, oleic, elaidic, and 12-hydroxystearic acids. A variety of aliphatic, aromatic, and heterocyclic amines, including primary, secondary, and tertiary amines, were investigated. The majority of these gave 1∶1 acid-amine compounds on solvent recrystallization of an equimolar mixture of acid and amine. Some of the amines gave no crystallizable salt, and with others the pure salt could not be obtained by this procedure. Under the same conditions the symmetrical alkyl, substituted alkyl, and aralkyl secondary amines investigated gave crystallizable compounds containg two molecules of fatty acid to one of amine. Molecular compounds of 2-aminopyridine with four molecules of saturated fatty acid were formed by recrystallization starting with a 1 to 4 amine-acid mixture. Surface-tension measurements were made for aqueous solutions of a few of the amine salts. One of the laboratories of the Southern Utilization Research and Development Division, Agricultural Research Service, U. S. Department of Agriculture.     

Fatty acid morpholides as plasticizers for vinyl chloride resins. III. Ternary compatibility-composition diagrams for the oleic-linoleic-stearic and oleic-linoleic-palmitic systems

A systematic investigation has been made of the effect of fatty acid composition on the compatibility of the corresponding mixed morpholides as plasticizers for vinyl chloride-vinyl acetate copolymer resins. Plasticizer evaluation data were obtained for the morpholides of lauric, palmitic, elaidic, and epoxyoleic acids and compared with the literature values for other fatty acid morpholides and morpholide mixtures. Ternary compatibility-composition diagrams have been constructured for the oleic-linoleic-stearic and the oleic-linoleic-palmitic morpholide systems. These diagrams make it possible to predict what adjustment, if any, must be made in the composition of any mixture of these fatty acids so that the corresponding morpholide mixture will be compatible. The diagrams will be useful in selecting the most appropriate and economical fatty acid sources from which to make compatible morpholide mixtures. Presented at the 52nd Annual Meeting, American Oil Chemists’ Society, St. Louis, Mo., May 1–3, 1961. One of the laboratories of the Southern Utilization Research and Development Division, Agricultural Research Service, U.S. Department of Agriculture.     

Carbon fiber structure and stability studies

A study has been made of the thermal-oxidative stability of several commercially available carbon fibers. Significant differences in the weight loss behavior were observed in air aging studies run on the bare fibers at 600°F (589 K). The stability of high temperature laminates, such as those based on NR-150 polyimide precursor solutions, was found to be directly affected by the stability of the reinforcing carbon fibers. In studies carried out to determine the reasons for carbon fiber instability, residual sodium sulfate was found to be the principle destabilizing factor. A mechanism whereby the sodium sulfate promotes the oxidation of carbon in the presence of air is proposed.