Lattice Constants of Boron Carbides

The lattice constants of boron carbides have been determined by powder X-ray diffraction for samples with compositions between about 7.7 and 20.5 at.% carbon. The boundaries of the single-phase region are at about 9 at.% carbon and near, but likely somewhat less than, 20 at.% carbon. The composition dependence of the lattice constants thus established provides a method of assessing the carbon concentration of unknown materials. In particular, assignment of the approximate composition of single crystals used in previous studies allows for a systematic examination of changes in interatomic separation as a function of composition. These changes are discussed in terms of a structural model of the boron carbide solid solution.     

Cuticular lipids of the booklouse,Liposcelis bostrychophila: hydrocarbons,aldehydes, fatty acids,and fatty acid amides

The booklouse, Liposcelis bostrychophila, is an increasingly common pest of stored food products worldwide. We report here the cuticular lipid composition of this pest (the first report of the hydrocarbons of any member of the Order Psocoptera and the first report of fatty acid amides as cuticular components for any insect). No unsaturated hydrocarbons were present. A homologous series of n-alkanes (C₂₁–C₃₄), monomethyl alkanes (3-, 4-, 5-, 7-, 9-, 11-, 12-, 13- and 15-methyl-) with a carbon chain range of C₂₈–C₄₂, and dimethyl alkanes (3, 7-; 9, 13-; 11, 15-; 13, 17-; 9, 21-; 11, 19-; and 13, 21-); with a carbon number range of C₃₁–C₄₃ were identified. The relative abundances of these hydrocarbons were low, comprising approximately 0.0125% of total biomass. The amides were a homologous series (C₁₆–C₂₂ in chain length), with the major amide being stearoyl amide. In addition to the amides, free fatty acids (C_16:1, C_16:0, C_18:2, C_18:1, and C_18:0 in chain length) and three straight chain aldehydes (C₁₅, C₁₆, and C_17:1 in chain length) also occurred as cuticular components. These findings are discussed in terms of the chemical and physiological ecology of this species.     

High-pressure fluidized bed coating utilizing supercritical carbon dioxide

Various particles with sizes between 100 and 200 μm were encapsulated with waxes commonly used in technical coating applications. For this, a homogeneous mixture of molten paraffin and supercritical carbon dioxide was prepared in an autoclave and injected into the high-pressure fluidized bed through a nozzle from the bottom. Due to the different conditions in the mixing autoclave and the fluidized bed, the paraffin precipitated in the vicinity of the nozzle and adhered to the solid particles. A complete, thin, uniform, and solvent-free coating was produced. The use of two paraffins with different alkane compositions resulted in dissimilar spreads on glass beads due to their different glass transition temperatures. A smaller pressure drop across the nozzle led to more uniform and even coatings. Glass beads, ceramic spheres, potassium chloride, and lactose showed similar coating results, whereas different morphologies were observed with a plastic material, characterized by a rougher surface and a lower surface energy. The high quality of the coating was confirmed by standard dissolution tests with coated potassium chloride crystals and lactose agglomerates.     

Optimal modification of annexin V with fluorescent dyes

The many uses of chemically modified annexin Vs necessitate an understanding of the optimal degree of modification and modification sites of the protein. When reacted with the N-hydroxysuccinimide ester of Cy5.5, annexin V with one modification per mole of protein retained its affinity for phosphatidylserine of apoptotic cells, whereas modification with two dyes per mole of protein caused a complete loss of activity. A tryptic digest LC/MS method was used to identify the modification sites as either of two closely spaced lysine residues, in position 286 or 290. The crystal structure indicated the location of these lysines was distal to the phosphatidylserine binding sites on annexin V. These results can be used to develop active or inactive fluorescent control annexin V proteins and to suggest strategies for attaining higher levels of modification with retention of bioactivity.     

Ta2O5/Nb2O5 and Y2O3 Co-doped Zirconias for Thermal Barrier Coatings

Zirconia doped with 3.2–4.2 mol% (6–8 wt%) yttria (3–4YSZ) is currently the material of choice for thermal barrier coating topcoats. The present study examines the ZrO₂-Y₂O₃-Ta₂O₅/Nb₂O₅ systems for potential alternative chemistries that would overcome the limitations of the 3–4YSZ. A rationale for choosing specific compositions based on the effect of defect chemistry on the thermal conductivity and phase stability in zirconia-based systems is presented. The results show that it is possible to produce stable (for up to 200 h at 1000°–1500°C), single (tetragonal) or dual (tetragonal + cubic) phase chemistries that have thermal conductivity that is as low (1.8–2.8W/m K) as the 3–4YSZ, a wide range of elastic moduli (150–232 GPa), and a similar mean coefficient of thermal expansion at 1000°C. The chemistries can be plasma sprayed without change in composition or deleterious effects to phase stability. Preliminary burner rig testing results on one of the compositions are also presented.     

What are batteries, fuel cells, and supercapacitors?

Electrochemical energy conversion devices are pervasive in our daily lives. Batteries, fuel cells and supercapacitors belong to the same family of energy conversion devices. They are all based on the fundamentals of electrochemical thermodynamics and kinetics. All three are needed to service the wide energy requirements of various devices and systems. Neither batteries, fuel cells nor electrochemical capacitors, by themselves, can serve all applications.     

Misalignment-Induced Bending in Pin-Loaded Tensile-Creep Specimens

In this paper, we have examined the possibility that elastic bending induced by load misalignment can affect creep measurements on pin-loaded tension specimens of silicon nitride (Si₃N₄). We have shown that elastic bending at room temperature can be as great as 42% of the axial strain when clean pins were used but was reduced to ∼3% when lubricated pins were used. Creep tests at the same applied stress and temperature were conducted on two groups of Si₃N₄ test specimens: one group used clean pins, and the other group used lubricated pins. By measuring the shapes of the specimens before and after the creep tests, we have determined that the loading holes were slightly misaligned before the creep tests and that small amounts of bending were induced by the creep tests. Bending occurred both in the gauge section of the specimen and in the transition region between the gauge section and the heads of the specimen (the latter phenomenon is defined as hinge bending). Our study indicated that the secondary creep rate, the hinge bending, and the bending of the gauge section was not dependent on pin lubrication, because the results from the clean and lubricated groups were statistically indistinguishable. Hinge bending was dependent on initial misalignment of the loading holes, whereas bending of the gauge section was independent of such factors.     

Characterization of the surface area of overflow droplets generated by a gas-lift pump under reduced pressure

Water-modelling experiments were carried out to characterize the surface area of overflow droplets generated by a gas-lift pump under reduced pressure as a function of various operating parameters, namely, top pressure, gas flow rate, nozzle submergence, lift ratio and riser diameter. The liquid phase mass transfer coefficient was obtained by applying the penetration theory (Treybal, 1980; Bird et al., 1960) to the overflow generated from the riser. Under reduced pressure, churn-turbulent flow, consisting of distorted bullet-shaped bubbles, was predominant in the flow regime. The increase of liquid circulation rate and flight time and the decrease of droplet size increased the refining rate. Because of the large droplet size, the refining rate of molten metals was smaller than that of water.     

Processing and Mechanical Properties of Al2O3/Ni3Al Composites with Interpenetrating Network Microstructure

Composites with microstructures of interpenetrating networks were manufactured by gas pressure infiltration of Ni₃Al into porous preforms of aluminum oxide. Composites with Ni₃Al contents of between 15% and 30% by volume were made and evaluated mechanically at temperatures between room temperature and 1000°C. The fracture strength, the fracture toughness, Young's modulus, and the thermal expansion coefficient were measured for each composite and test condition and were correlated with the microstructures of the composites. Composites with low Ni₃Al contents had strengths below 400 MPa, presumably due to microcracking along the interface between the Ni₃Al and the Al₂O₃. The composite with the highest content of Ni₃Al, 30 vol%, had a mean fracture strength of 675 ± 16 MPa, a Weibull modulus of 23.9, and a room-temperature toughness of 9.2 ± 0.5 MPa·m^1/2.