Effect of different physical factors on the synthesis of spherical gold nanoparticles towards cost‐effective biomedical applications

Gold nanoparticles (AuNPs) have great potential to contribute to numerous application fields of biomedicine, which are highly dependent on their physicochemical properties, such as size and shape. Due to the final characteristics, nanoparticles (NPs) are primarily affected by different factors of reaction conditions; the present study aimed to evaluate the effects of manipulating the main physical parameters of the Turkevich method to optimise the fabrication of citrated capped AuNPs in a spherical shape, desirable final size, and efficiency. For this purpose, various experiments of citrate‐capped spherical AuNPs synthesis were designed to study the roles of a wide range of initial pH values and temperature of reaction, Na₃Cit/HAuCl₄ molar ratio, and two order reagent additions, method I and method II, in the final characterisations and reaction efficacy. Prepared NPs synthesised with different experiments were characterised by dynamic light scattering, UV‐Visible, and fourier transform infrared spectroscopy. Furthermore, NPs obtained from optimised synthesis conditions were more detailed using UV‐Visible, transmission electron microscopy, and XRD. The findings indicated that the final size and synthesis efficacy of citrated capped spherical AuNPs were significantly affected by all studied synthesis parameters and the order addition of reagents. The higher initial reaction temperature and Na₃Cit/HAuCl₄ Molar ratio provided a smaller particle size with desirable synthesis efficacy. Besides, final optimised NPs were provided in cubic crystal structures, and each NP''s single crystal was obtained. In sum, our findings indicated that optimising synthesis conditions could improve size distribution, morphology, crystallite size, and structures of final NPS, as well as efficiency, which is a principal factor associated with future cost‐effective productions on large scales. Further studies are needed in this regard.     

Hughes syndrome: a common problem in Kuwait hospitals

The objective was to study antiphospholipid antibody syndrome (APS or Hughes syndrome) in two major teaching hospitals in Kuwait. patients with suspected Hughes syndrome were investigated with tests for anticardiolipin antibodies (aCL) and lupus anticoagulants (LAC) over 1 yr. Diagnosis was considered confirmed if significant levels of either or both antibodies with no obvious cause (primary), or with systemic lupus erythematosus (SLE) or SLE-like illness (including SLE serology) (secondary) were present. Twelve (37.5%; seven females, 58%) primary and 20 (62.5%; 18 females, 90%) secondary Hughes syndrome patients were seen during this period. patients were Kuwaiti, Middle-Eastern and North-African Arabs (29). Filipinos (2) and White (1). None were from the Indian subcontinent. The main presentation was thrombosis in 75% (arterial in 25% and venous in 50%), and recurrent abortions in 50% of married women. Haematological and dermatological manifestations were limited entirely to the secondary variety, seen in 25% and 19%, respectively. Clinical manifestations were severe, leading to death in one, intensive-care management in 31% and with partial or complete warfarin resistance or brittleness in 25%. Neurological/eye and cardiac manifestations were not seen, as these patients may be attending separate speciality hospitals for these diseases in Kuwait. The approximate prevalence of this syndrome was 2.66/1000 admissions in medical wards. Projected to the total referral areas of the two hospitals, an approximate figure of 52 patients/million population/year was obtained. Hughes syndrome was a common problem among Arabs, Filipinos and possibly Whites in Kuwait. Its manifestations were severe, often requiring intensive-care management, and in one case it was fatal. Patients from the Indian subcontinent were conspicuous by their absence, despite the fact that they were well represented in all other rheumatic disease groups. Ethnic and/or geographical factors could be important in this syndrome. To the best of our knowledge, this is the first report of Hughes syndrome from the Middle East.     

Electrocatalytic oxidation of methanol on carbon paste electrode modified by nickel ions dispersed into poly (1,5-diaminonaphthalene) film

Poly (1,5-diaminonaphthalene) film was prepared by using the repeated potential cycling technique in an acidic solution at the surface of carbon paste electrode. Then transition metal ions of Ni(II) were incorporated to the polymer by immersion of the modified electrode in a 1.0 M nickel chloride solution. The electrochemical characterization of this modified electrode exhibits stable redox behavior of the Ni(III)/Ni(II) couple. Also, cyclic voltammetric experiments showed that methanol electrooxidized at the surface of this Ni(II) dispersed polymeric modified carbon paste electrode [Ni/P-1,5-DAN/MCPE]. The mechanism of methanol oxidation changes from diffusion control at low concentration to a catalytic reaction at higher methanol concentration. The effects of both scan rate and methanol concentration on the anodic peak height of the methanol oxidation were discussed.     

Thermochemical,Sensitivity and Detonation Characteristics of New Thermally Stable High Performance Explosives

The M06‐2X/6‐311G(d,p) and B3LYP/6‐311G(d,p) density functional methods and electrostatic potential analysis were used for calculation of enthalpy of sublimation, crystal density and enthalpy of formation of some thermally stable explosives in the gas and solid phases. These data were used for prediction of their detonation properties including heat of detonation, detonation pressure, detonation velocity, detonation temperature, electric spark sensitivity, impact sensitivity and deflagration temperature using appropriate methods. The range of different properties for these compounds are: crystal density 1.51–2.01 g cm⁻³, enthalpy of sublimation 346.4–424.7 kJ mol⁻¹, the solid phase enthalpy of formation 500.4–860.6 kJ mol⁻¹, heat of detonation 13.64–17.57 kJ g⁻¹, detonation pressure 33.0–37.0 GPa, detonation velocity 8.5–9.5 km s⁻¹, detonation temperature 5488–6234 K, electric spark sensitivity 7.89–9.47 J, impact sensitivity 21–38 J, deflagration temperature 560–586 K and power [%TNT] 207–276. The results show that two novel energetic compounds N,N′‐(diazene‐1,2‐diylbis(2,3,5,6‐tetranitro‐4,1‐phenylene))bis(5‐nitro‐4H‐1,2,4‐triazol‐3‐amine) (DDTNPNT3A) and 1,1′‐(diazene‐1,2‐diylbis(2,3,5,6‐tetranitro‐4,1‐phenylene))bis(3‐nitro‐1H‐1,2,4‐triazol‐5‐amine) (DDTNPNT5A) can be introduced as thermally explosives with high detonation performance.     

Analysis of DLL Jitter due to Voltage-Controlled Delay Line

In this paper we analyze jitter in a delay-locked loop (DLL) due to uncertainties in the voltage-controlled delay line (VCDL). To obtain a closed-form equation for jitter in the DLL, time-domain equations of the DLL are used. The jitter at the intermediate stages of the VCDL and the jitter of a conventional delay cell are analyzed. The simulation results show that the jitter of the DLL due to mismatch of the delay cells is zero at the beginning and end of the VCDL and is highest at the middle of the VCDL. Also, a DLL is designed in TSMC 0.18 μm CMOS technology to show the accuracy of the proposed analytical method.     

A Novel Low Power Architecture for DLL-Based Frequency Synthesizers

This paper presents a novel DLL-based frequency synthesizer architecture to generate fractional multiples of reference frequency and reduce the power consumption of the frequency synthesis block. The architecture is adopted for French VHF application as an example. The DLL architecture allows for minimal area, while consuming low power. The proposed circuit can operate at a substantially low supply voltage. The circuit level and system level designs are presented. It was shown that for the mentioned standard, a mere 27 delay stages for VCDL are sufficient to cover French VHF band. Simulation results confirm the analytical predictions. The proposed DLL-based frequency synthesizer is implemented in a 0.13 μm CMOS technology. This fractional DLL-based frequency synthesizer is adopted for 176 MHz to 216 MHz with maximum power consumption of 2.62 mW and RMS jitter of 10 ps @ 216 MHz.     

Mitigation of switching‐induced transient electromagnetic interference on control cable using Ni–Zn ferrite rings over cable sheath in gas‐insulated substations

The transient electromagnetic fields during switching operation in gas‐insulated substations (GISs) have rise times on the order of nanoseconds. These fields leak into the external environment through the discontinuities of gas‐insulated modules and affect the control cables and induce the transient voltage on cables, which results in malfunctioning of the equipment. The amplitudes of the electric and magnetic fields could be a few tens of kilovolts per meter and a few hundred amperes per meter according to layout of GIS, respectively. In this work, the induced voltage in the central conductor of a control cable and the induced current in its sheath, which is parallel to bus duct in a GIS with rated voltage of 230 kV, are calculated. Influence of the sheath material on the induced voltage and the type of its grounding on the induced current are analyzed. Furthermore, the impact of installing ferrite rings over the control cable sheath in mitigating the induced voltage and current is investigated. © 2013 Institute of Electrical Engineers of Japan. Published by John Wiley & Sons, Inc.     

Effect of processing parameters and glycerin addition on the properties of Al foams

Aluminum foam has been produced by sintering and dissolution processes using NaCl powders as a space holder. In this research, glycerin is used as a novel lubricant along with acetone. The effects of the processing parameters including compacting pressure, sintering temperatures (620, 640 and 650 °C), size, and volume fraction of the space holder, on the physical and mechanical properties of the produced foams have been investigated. Due to segregation of the Al and NaCl powders at high compaction pressures, spalling of Al foams was observed. Meanwhile, adding small amounts of acetone and glycerin to the mixture ensures homogeneity and prevents segregation of dissimilar powders at varying pressure. Moreover, the addition of glycerin provides an improved homogenous stress distribution within the produced foams during mechanical testing, which in turn halts crack propagation. Meanwhile, an alternative technique to remove NaCl particles during the dissolution stage has been proposed. The results showed that high quality foams were successfully produced under a compaction pressure range of 250–265 MPa and sintering temperature of 650 °C.     

Fabrication of highly porous Pt coated nanostructured Cu-foam modified copper electrode and its enhanced catalytic ability for hydrogen evolution reaction

The nanoporous copper foam was prepared by electrochemical reduction of copper ion at the copper substrate. The as-prepared substrate was used as three-dimensional templates for preparation of Pt coated nanostructured Cu-foam by galvanic replacement of Cu with platinum by simply immersing the prepared nanoporous copper foam in a K₂PtCl₆ aqueous solution. The structure and nature of the fabricated Pt coated nanostructured Cu-foam was characterized by scanning electron microscopy and energy dispersive X-ray spectrometry. Pt coated nanostructured Cu-foam modified copper electrode exhibited remarkable electrocatalytic activity for the hydrogen evolution reaction. The effect of electrodeposition time during Cu-foam formation on the kinetic constants for hydrogen evolution reaction was comparatively investigated.