Degradation of an Azo Dye (Ponceau 4R) and Treatment of Wastewater from a Food Industry by Ozonation

Experiments for degradation of the extensively marketed Ponceau 4R dye in aqueous solution and for oxidation of raw wastewater from a confectionary industry have been carried out by using ozone. All the experiments were performed in a cylindrical semi-batch reactor at approximately 20 ^oC for 7200 s. A mass flow rate of 1.158?×?10^?6 kg s^?1 of ozone was continuously fed in the reactor. The pH of the azo dye aqueous solution (distilled water + Ponceau 4R) was always kept at approximately 5.8, while in the case of the raw wastewater the same factor was changed from 4.7 to 9.4 in two different experimental runs. Absorbance measurements at 508 nm show that the investigated azo dye found in the azo dye aqueous solution was completely degraded after only 600 s. At this initial period a substantial fall of TOC (Total Organic Carbon) (up to 45%) was noticed, but the rate was exponentially decreased at longer reaction times up to a TOC removal no higher than 60%. The ozonation was also responsible for reducing the apparent color of the raw wastewater to almost 10% of its initial value at the optimum pH (9.4 ± 1.5). The effect of pH was important on apparent color, but it had absolutely no influence on the kinetics results of COD (Chemical Oxygen Demand), which were kept constant over the entire period of reaction.     

Immune-Pineal Axis: Nuclear Factor κB (NF-κB) Mediates the Shift in the Melatonin Source from Pinealocytes to Immune Competent Cells

Pineal gland melatonin is the darkness hormone, while extra-pineal melatonin produced by the gonads, gut, retina, and immune competent cells acts as a paracrine or autocrine mediator. The well-known immunomodulatory effect of melatonin is observed either as an endocrine, a paracrine or an autocrine response. In mammals, nuclear translocation of nuclear factor κ-light-chain-enhancer of activated B cells (NF-κB) blocks noradrenaline-induced melatonin synthesis in pinealocytes, which induces melatonin synthesis in macrophages. In addition, melatonin reduces NF-κB activation in pinealocytes and immune competent cells. Therefore, pathogen- or danger-associated molecular patterns transiently switch the synthesis of melatonin from pinealocytes to immune competent cells, and as the response progresses melatonin inhibition of NF-κB activity leads these cells to a more quiescent state. The opposite effect of NF-κB in pinealocytes and immune competent cells is due to different NF-κB dimers recruited in each phase of the defense response. This coordinated shift of the source of melatonin driven by NF-κB is called the immune-pineal axis. Finally, we discuss how this concept might be relevant to a better understanding of pathological conditions with impaired melatonin rhythms and hope it opens new horizons for the research of side effects of melatonin-based therapies.     

A transcultural study on stirred strawberry yogurt: consumer acceptability versus sensory quality with trained panel

The present work was designed in order to obtain the cut off point, to be used in a shelf life study on whole stirred strawberry yogurt. The study was simultaneously carried out in Argentina, Chile and Costa Rica, assaying the same kind of product, elaborated in each one of the countries. The sensory quality parameters obtained from trained panelists and the consumers acceptability, were correlated by using the cut off point methodology through a quality evaluation by the Karlsruhe scale. According to preliminary studies, the storage at 42 degrees C produced considerable damage on parameters such as pH, acidity (volumetric assay), viscosity and sensory quality. For each sample, the cut off point was determined. This value corresponds to the threshold score for the sensory quality, where the consumer starts to perceive negative changes in the product, when comparing with the fresh product. The rejection percentage was also calculated according to the cut off point. The cut off points and the percentage of rejection obtained by the three participating countries were similar. Data obtained from Costa Rica showed changes in color, acidity and rancidity. Argentinean yogurts developed acidity that had a negative effect on texture, appearance and residual flavors. Chilean samples presented a sensory quality that remains almost without change through the studied time. The differences of the deterioration pattern amongst the three countries, demonstrates that the products are different in formulation and elaboration process, in spite of been the same kind of yogurt. This could be explained by differences specified in the regulation of each country.     

Off-line optimization and control for real time integration of a three-phase hydrogenation catalytic reactor

In order to develop and test the integration procedure, in this paper a real time process integration involving the optimization and control of the process is presented, in this case, with the two-layer approach. The used optimization algorithms were Levenberg–Marquardt and SQP that solve a non-linear least square problem subject to bounds on the variables. The two-layer approach is a hierarchical control structure where an optimization layer calculates the set points and manipulated variables to the advanced controller, which is based on the dynamic matrix control with constraints (QDMC). The non-isothermal dynamic model of the three-phase slurry catalytic reactor with appropriate solution procedure was utilized in this work (Vasco de Toledo, E. C., Santana, P. L., Maciel, M. R. W., & Maciel Filho, R. (2001). Dynamic modeling of a three-phase catalytic slurry reactor. Chemical Engineering Science, 56, 6055–6061). The model consists on mass and heat balance equations for the catalyst particles as well as for the bulk phases of gas and liquid. The model was used to describe the dynamic behavior of hydrogenation reaction of o-cresol to obtain 2-methil-cyclohexanol, in the presence of a catalyst Ni/SiO₂.     

In Vitro Activity of Copper(II) Complexes,Loaded or Unloaded into a Nanostructured Lipid System,against Mycobacterium tuberculosis

Tuberculosis (TB) is an infectious disease caused mainly by the bacillus Mycobacterium tuberculosis (Mtb), presenting 9.5 million new cases and 1.5 million deaths in 2014. The aim of this study was to evaluate a nanostructured lipid system (NLS) composed of 10% phase oil (cholesterol), 10% surfactant (soy phosphatidylcholine, sodium oleate), and Eumulgin^® HRE 40 ([castor oil polyoxyl-40-hydrogenated] in a proportion of 3:6:8), and an 80% aqueous phase (phosphate buffer pH = 7.4) as a tactic to enhance the in vitro anti-Mtb activity of the copper(II) complexes [CuCl₂(INH)₂]·H₂O (1), [Cu(NCS)₂(INH)₂]·5H₂O (2) and [Cu(NCO)₂(INH)₂]·4H₂O (3). The Cu(II) complex-loaded NLS displayed sizes ranging from 169.5 ± 0.7095 to 211.1 ± 0.8963 nm, polydispersity index (PDI) varying from 0.135 ± 0.0130 to 0.236 ± 0.00100, and zeta potential ranging from −0.00690 ± 0.0896 to −8.43 ± 1.63 mV. Rheological analysis showed that the formulations behave as non-Newtonian fluids of the pseudoplastic and viscoelastic type. Antimycobacterial activities of the free complexes and NLS-loaded complexes against Mtb H₃₇Rv ATCC 27294 were evaluated by the REMA methodology, and the selectivity index (SI) was calculated using the cytotoxicity index (IC₅₀) against Vero (ATCC^® CCL-81), J774A.1 (ATCC^® TIB-67), and MRC-5 (ATCC^® CCL-171) cell lines. The data suggest that the incorporation of the complexes into NLS improved the inhibitory action against Mtb by 52-, 27-, and 4.7-fold and the SI values by 173-, 43-, and 7-fold for the compounds 1, 2 and 3, respectively. The incorporation of the complexes 1, 2 and 3 into the NLS also resulted in a significant decrease of toxicity towards an alternative model (Artemia salina L.). These findings suggest that the NLS may be considered as a platform for incorporation of metallic complexes aimed at the treatment of TB.     

Isoflavone content among maturity group 0 to II soybeans

This study reports the isoflavone contents of 210 soybean cultivars grown in South Dakota and explores possible relations between isoflavone contents and agronomic characteristics. Total isoflavone contents (normalized) ranged from 1161 to 2743 μg/g. A number of agronomic characteristics were documented for each variety including maturity group, hilum color, disease resistance, seed weight, yield, maturity (in days), and plant height. Varieties in maturity group I had significantly higher total isoflavones when compared to maturity group 0. Hilum color was related to differences in genistin, daidzein, and genistein content. No differences in isoflavone content were observed based on disease resistance profiles. Genistein content was found to be negatively correlated with yield, days of maturity, and plant height. Weak but significant correlations also existed between these agronomic characteristics and other isoflavones.     

Development of New Sulphonyl Resin from Modification of Commercial Resin

Summary This article deals with the handy synthesis of sulfonyl resins, which were produced by the treatment of a commercial sulfonic resin (Lewatit VPOC1812^® based at divinylbenzene (DVB) and styrene (STY). The preliminary chemical modification was based on the reaction of the Lewatit VPOC1812^® with thionyl chloride aiming to produce the sulfonyl chloride groups. The best conditions to obtain the sulfonyl chloride groups were: SOCl₂/SO₃H (molar ratio) =13 at 79 °C during 72 h. The resin chlorinated was afterward treated with urea, thiourea or guanidine. The functionalized resins with urea, thiourea or guanidine were produced with 56, 68 and 93% yield, respectively. The commercial and modified resins were characterized by apparent density, swelling degree, elemental analysis (CHNS), FTIR, optical microscopy (OM) and scanning electron microscopy (SEM).     

Beef tallow biodiesel produced in a pilot scale

In the present work, the process of biodiesel production in a pilot plant has been studied using beef tallow as raw materials with methanol and potassium hydroxide as catalyst. The biodiesel quality is regulated by Brazilian specifications (Resolution 42) by the National Agency of Petroleum (ANP). The alkaline transesterification of animal fat with methanol produces a biodiesel with high quality and also with a good conversion rate. The process is possible but the economical viability must be improved by recovering methanol and glycerin. The obtained results have been used for industrial scale up of the process.     

Metabolic Glycoengineering in hMSC-TERT as a Model for Skeletal Precursors by Using Modified Azide/Alkyne Monosaccharides

Metabolic glycoengineering enables a directed modification of cell surfaces by introducing target molecules to surface proteins displaying new features. Biochemical pathways involving glycans differ in dependence on the cell type; therefore, this technique should be tailored for the best results. We characterized metabolic glycoengineering in telomerase-immortalized human mesenchymal stromal cells (hMSC-TERT) as a model for primary hMSC, to investigate its applicability in TERT-modified cell lines. The metabolic incorporation of N-azidoacetylmannosamine (Ac₄ManNAz) and N-alkyneacetylmannosamine (Ac₄ManNAl) into the glycocalyx as a first step in the glycoengineering process revealed no adverse effects on cell viability or gene expression, and the in vitro multipotency (osteogenic and adipogenic differentiation potential) was maintained under these adapted culture conditions. In the second step, glycoengineered cells were modified with fluorescent dyes using Cu-mediated click chemistry. In these analyses, the two mannose derivatives showed superior incorporation efficiencies compared to glucose and galactose isomers. In time-dependent experiments, the incorporation of Ac₄ManNAz was detectable for up to six days while Ac₄ManNAl-derived metabolites were absent after two days. Taken together, these findings demonstrate the successful metabolic glycoengineering of immortalized hMSC resulting in transient cell surface modifications, and thus present a useful model to address different scientific questions regarding glycosylation processes in skeletal precursors.     

Multivariate process trajectories for molecular description of MF thermal curing and correlation with hydrolytic stability

During curing of thermosetting resins the technologically relevant properties of binders and coatings develop. However, curing is difficult to monitor due to the multitude of chemical and physical processes taking place. Precise prediction of specific technological properties based on molecular properties is very difficult. In this study, the potential of principal component analysis (PCA) and principal component regression (PCR) in the analysis of Fourier transform infrared (FTIR) spectra is demonstrated using the example of melamine-formaldehyde (MF) resin curing in solid state. FTIR/PCA-based reaction trajectories are used to visualize the influence of temperature on isothermal cure. An FTIR/PCR model for predicting the hydrolysis resistance of cured MF resin from their spectral fingerprints is presented which illustrates the advantages of FTIR/PCR compared to the combination differential scanning calorimetry/isoconversional kinetic analysis. The presented methodology is transferable to the curing reactions of any thermosetting resin and can be applied to model other technologically relevant final properties as well.