Method for Characterization of Solvents for Physical Absorption Processes

A method for solvent screening and searching for additives in the field of physical absorption processes is presented. A model based on the concept of virtual components and on the concept of a simplified abstract flow sheet is created. An estimation procedure for thermodynamically consistent property sets for the virtual component is developed. The model is implemented into MATLAB®. Its application is demonstrated in two studies including a study for a solvent additive. Potential candidates can be characterized and ranges for properties of the solvent or additive are found by means of the model. Conclusions obtained from the model support the screening process by a reduction of the number of further investigated components.     

Investigation of the Equivalence of National Dew-Point Temperature Realizations in the ?50?°C to +?20?°C Range

In the field of humidity quantities, the first CIPM key comparison, CCT-K6 is at its end. The corresponding European regional key comparison, EUROMET.T-K6, was completed in early 2008, about 4?years after the starting initial measurements in the project. In total, 24 NMIs from different countries took part in the comparison. This number includes 22 EURAMET countries, and Russia and South Africa. The comparison covered the dew-point temperature range from ?50?°C to +20?°C. It was carried out in three parallel loops, each with two chilled mirror hygrometers as transfer standards in each loop. The comparison scheme was designed to ensure high quality results with evenly spread workload for the participants. It is shown that the standard uncertainty due to the long-term instability was smaller than 0.008?°C in all loops. The standard uncertainties due to links between the loops were found to be smaller than 0.025?°C at ?50?°C and 0.010?°C elsewhere. Conclusions on the equivalence of the dew-point temperature standards are drawn on the basis of calculated bilateral degrees of equivalence and deviations from the EURAMET comparison reference values (ERV). Taking into account 16 different primary dew-point realizations and 8 secondary realizations, the results demonstrate the equivalence of a large number of laboratories at an uncertainty level that is better than achieved in other multilateral comparisons so far in the humidity field.     

Thermodynamic modeling of hydrogen refueling for heavy-duty fuel cell buses and comparison with aggregated real data

The foreseen uptake of hydrogen mobility is a fundamental step towards the decarbonization of the transport sector. Under such premises, both refueling infrastructure and vehicles should be deployed together with improved refueling protocols. Several studies focus on refueling the light-duty vehicles with 10 kg_H2 up to 700 bar, however less known effort is reported for refueling heavy-duty vehicles with 30–40 kg_H2 at 350 bar. The present study illustrates the application of a lumped model to a fuel cell bus tank-to-tank refueling event, tailored upon the real data acquired in the 3Emotion Project. The evolution of the main refueling quantities, such as pressure, temperature, and mass flow, are predicted dynamically throughout the refueling process, as a function of the operating parameters, within the safety limits imposed by SAE J2601/2 technical standard. The results show to refuel the vehicle tank from half to full capacity with an Average Pressure Ramp Rate (APRR) equal to 0.03 MPa/s are needed about 10 min. Furthermore, it is found that the effect of varying the initial vehicle tank pressure is more significant than changing the ambient temperature on the refueling performances. In conclusion, the analysis of the effect of different APRR, from 0.03 to 0.1 MPa/s, indicate that is possible to safely reduce the duration of half-to-full refueling by 62% increasing the APRR value from 0.03 to 0.08 MPa/s.     

Changes in soil carbon stock after cropland conversion to grassland in Russian temperate zone: measurements versus model simulation

The collapse of Soviet Union in early 1990s led to abandonment of large area of arable land which is assumed to act as a carbon (C) sink. We studied the ability of two dynamic soil C models (Yasso07 and RothC) to predict changes in soil C content after cropland abandonment. The performance of the models was compared using the results of a long-term experiment in Pushchino, Moscow region (54°50′N, 37°35′E) in Russia. The experiment was divided in four combinations of fertilizer or mowing treatments on former cropland soil. The soil C content was determined in the year of establishment (1980) and thereafter in 1999 and 2004. The soil C stocks increased by about 1.5- to 1.8-fold during the study period. Both models predicted the overall change in soil C relatively well (modelling efficiency of Yasso07 and RothC were 0.60 and 0.73, respectively). According to the models, the soil gained on average 140–150 g C m^?2 year^?1 during the first 5 years after conversion of cropland to grassland. The C sequestration rate decreased to 40–50 g C m^?2 year^?1 after 20 years of land use change. The sequestration rates estimated in this study are comparable to the rates observed in other studies.     

Nutrient Recommendations for Growing-up Milk: A Report of an Expert Panel

Utilization of expert recommendations in the development of food and beverage nutritional profiles represents an opportunity to merge science and food manufacturing to deliver nutritionally optimized products into the marketplace. This report details expert panel guidelines for the design of a nutritional product for children one to six years of age. This interaction demonstrates the essential synergy between academia and food manufacturers in translating nutrient recommendations to food for their delivery to a population. Important factors for such translation are the identification of applicable nutrient recommendations and selection of an appropriate delivery matrix. This report demonstrates the translation of expert nutritional recommendations to a milk-based product for children—one to six years of age.     

A new enzymatically produced 1-lactulose: A pilot study to test the bifidogenic effects

In a novel pilot plant scale process, lactulose was synthesized enzymatically, operating a maximum batch volume of 170 L. The test product was subjected to a randomized, double-blind, placebo-controlled pilot feeding study. Participants consumed a milk serum drink for 14 days, equalling a daily intake of about 3 g d⁻¹ galactosyl-fructoses. Additionally, the effect of industrially produced lactulose and a placebo drink without lactulose was determined. So far, clinical studies on the prebiotic action of lactulose only focussed on the effects of industrially generated lactulose. The intake of enzymatically synthesized lactulose significantly increased (p = 0.001) faecal bifidobacterial counts, while there was no difference with industrially produced lactulose. Analysis of the compounds showed that the drink with enzymatically synthesized lactulose contained an additional disaccharide, β-1,1-galactosyl-fructose. Presumably, this sugar has a bifidogenic effect and may represent a novel prebiotic.