The stability of LaNi5 in a Cu matrix

The reaction of LaNi₅ with Cu powder during sintering at high temperature was examined in order to obtain better conductivity and ductility. Pressurized and forged copper-LaNi₅ pellets were investigated by optical metallography, DTA, XRD and TEM. The need for heat treatment after pressing and/or forging is vital to obtain good diffusion bonding between the copper particles and to improve the material strength. No interaction between La, Ni and Cu were observed after heating at 1173 K but a very stable La₂O₃ phase was created around the LaNi₅ particle. Rolling up to 85% reduction showed good ductility.     

Low-temperature interface reaction in aluminium-silicon carbide particulate composites produced by mechanical alloying

An experimental investigation has been carried out on the reaction that takes place between 3 and 20 μm SiC particles and the aluminium alloy 1050 matrix of composite materials prepared by a mechanical alloying process. The work is different from that undertaken by other researchers in that the SiC-Al interface reaction has been studied in the temperature range 853–933 K, i.e., with the matrix initially in the solid state. Differential thermal analysis, X-ray diffraction and scanning electron microscopy all show that the SiC-Al reaction initiates in the solid state at temperatures as low as 883 K. The reaction produces Al4C3 and Si, the latter entering into solid solution in the aluminium matrix. At temperatures exceeding 903 K, the reaction produces a liquid phase and at this stage the speed of the interface reaction increases significantly. The results are discussed in terms of Al-Si-C metastable equilibrium and the kinetics of the reaction. This revised version was published online in November 2006 with corrections to the Cover Date.     

Densification of plasma deposited silicon nitride films by hydrogen dilution

The effects of hydrogen dilution on the bonding characteristics, composition, and properties of SiN films deposited from a SiH₄/NH₃ mixture by r.f. plasma enhanced chemical vapor deposition were studied. The addition of relatively small amounts of hydrogen increased the Si/N ratio resulting in a corresponding increase in the Si---H/N---H bonding ratio. At higher hydrogen dilutions, the Si/N ratio decreased towards stoichiometric with significant changes in the hydrogen bonding characteristics. Changes in the physical properties are discussed in terms of the measured changes in bonding structure. Changes normally associated with changes in bulk film density were found to be well correlated to the Si---N bond density. The effects of substrate temperature and NH₃/SiH₄ ratio on films deposited under conditions of high hydrogen dilution were similar to those widely reported in the literature for plasma-enhanced chemical vapor deposition films deposited without hydrogen. Films deposited by remote plasma using hydrogen as the excitation exhibited high Si---N bond densities and low hydrogen. Experiments are planned to clarify the mechanism responsible for the observed changes in film properties.     

Use of Explosives on The Moon

The utilization of explosives for excavation on the lunar surface is under serious consideration as a part of the design for construction of temporary and permanent bases. An excavation research program has shown that small‐scale explosives blasting in a lunar‐soil simulant will greatly reduce the digging forces required for scoop and dragline excavators. Some crater‐blasting parameters were determined for the lunar soil simulant at one Earth gravity and at 10 Earth gravities using a centrifuge. The size of the craters produced at 10 Earth gs matched those formed at one earth g by scaling according to the weight of the explosive. These data can be applied to explosive‐excavation problems such as habitat construction, burial of nuclear power sources, and the rapid construction of shelters remote from the main base to shield against solar‐flare activity.     

Young children''s understanding of pretense expressions of independent agency

Data from the Cancer Registry of Slovenia were used in a cohort study to determine whether the incidence of second primary cancers in patients with first primary breast cancer differs from the incidence expected in the general population. Special interest was given to long-term survivors. The expected numbers of second primary cancers were calculated by multiplying the number of appropriate person-years at risk by the corresponding age- and calendar-period-specific cancer incidence rates for women in Slovenia. The risk of a second primary cancer was expressed as the standardized incidence ratio (SIR). Of the 8,917 patients newly diagnosed in the period 1961-85 and followed-up to the end of 1994, 547 (6.2 percent) developed second primary cancers, whereas 410 (4.7 percent) were expected (SIR = 1.3, 95 percent confidence interval [CI] = 1.2-1.4). The risk was higher among younger patients. In long-term survivors, the risk was increased significantly for second primary cancer of the breast (SIR = 1.4, CI = 1.1-1.7), lung cancer (SIR = 1.6, CI = 1.1-2.3), melanoma (SIR = 2.7, CI = 1.5-4.4) and non-melanoma skin cancers(SIR = 2.0, CI = 1.6-2.4), corpus uteri cancer(SIR = 1.6, CI = 1.2-2.1), ovarian cancer(SIR = 2.3, CI = 1.7-3.0), and thyroid cancer (SIR = 2.5, CI = 1.2-4.6). Our results confirm the findings of several cohort studies carried out in Europe, the United States, and Japan, indicating that breast cancer patients should be monitored carefully for the occurrence of second primary cancers.     

Genetic influences on job satisfaction: A reply to Cropanzano and James.

Responds to the points made by R. Cropanzano and K. James (see record 1991-00462-001) concerning the article by R. D. Arvey et al (1989). The authors acknowledge that the Arvey et al study is based on a single design, makes use of a small and special sample, and, as such, is vulnerable to threats of internal and external validity. Nevertheless, after providing a more comprehensive conceptual and empirical context for the study, and after reviewing a number of the issues raised by Cropanzano and James, the authors conclude that it is not premature to accept the idea that work attitudes are partially genetically influenced. Indeed, the authors use behavioral genetic theory, together with data gathered in the Arvey et al study, to make specific point predictions regarding the outcomes of an array of studies that easily can be undertaken. Finally, the authors acknowledge that the comments and issues raised by Cropanzano and James, along with the interchange, can offer directions for future research in this important area. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Evolution of the capillary network in a reactive powder concrete during hydration process

Ultrasonic waves in echographic mode, combined with autogenous shrinkage measurements, were used to study the evolution of the capillary network of reactive powder concrete (RPC) from the time after the mixing. Two characteristic porous classes have been identified: the first, between 10 and 20 nm, begins when the material reaches its solid hyperstatic state, and the second about 1 or 2 nm. The first class is associated with the porous space between the C-S-H hydrate clusters and the second with the internal porosity of the hydrate. The evolution of the active capillary radius as a function of the degree of hydration allows us to understand the strong interaction between the capillary network size and the chemical activity given by the dissipated calorimetric power curve. Indeed, the maximum point of the chemical activity marks the transition of the first class of pores to the second one. Finally, measurements of electrical conductivity through RPC samples show that after the maximum of the dissipated power, the curve of this electrical conductivity presents the same evolution as the capillary radius. As the electrical conductivity clearly depends on the evolution of the capillary network, the similarity between the results confirms our analysis in pore classes.