Vergleichende papierchromatographische Identifizierung der Weine

Zusammenfassung Es ist eine Vorbehandlungs- und chromatographische Analysenmethode für die vergleichende Identifizierung der Weine entwickelt worden, welche sich auf die Bestimmung der Aminosäurezusammensetzung der Weine stützt. Mit dieser Methode kann man den Veränderungen der Aminosäurezusammensetzung auch während der Gärung und der Reifung der Weine folgen.Die Aminosäurechromatogramme desselben Weines sind leicht zu reproduzieren.Die Chromatogramme desselben Weines, aber verschiedenen Jahrganges, weichen voneinander bezüglich der Gesamtkonzentration der Aminosäuren ab. Die Chromatogramme zeigen sich deutlich als von demselben Typus, weil die Verhältnisse unter den Aminosäuren dieselben blieben.Die Chromatogramme der verschiedenen Weinsorten zeigen deutliche Unterschiede besonders im Gesamtaminosäuregehalt. Die Verhältnisse der Mengen von Alanin, Prolin, -Aminobuttersäure, Valin, Leucin undIsoleucin und die Gegenwart oder das Fehlen des Phenylalanins bilden eine gute Bewertungsgrundlage.     

Generation of urban road dust from anti-skid and asphalt concrete aggregates

Road dust forms an important component of airborne particulate matter in urban areas. In many winter cities the use of anti-skid aggregates and studded tires enhance the generation of mineral particles. The abrasion particles dominate the PM10 during springtime when the material deposited in snow is resuspended. This paper summarizes the results from three test series performed in a test facility to assess the factors that affect the generation of abrasion components of road dust. Concentrations, mass size distribution and composition of the particles were studied. Over 90% of the particles were aluminosilicates from either anti-skid or asphalt concrete aggregates. Mineral particles were observed mainly in the PM10 fraction, the fine fraction being 12% and submicron size being 6% of PM10 mass. The PM10 concentrations increased as a function of the amount of anti-skid aggregate dispersed. The use of anti-skid aggregate increased substantially the amount of PM10 originated from the asphalt concrete. It was concluded that anti-skid aggregate grains contribute to pavement wear. The particle size distribution of the anti-skid aggregates had great impact on PM10 emissions which were additionally enhanced by studded tires, modal composition, and texture of anti-skid aggregates. The results emphasize the interaction of tires, anti-skid aggregate, and asphalt concrete pavement in the production of dust emissions. They all must be taken into account when measures to reduce road dust are considered. The winter maintenance and springtime cleaning must be performed properly with methods which are efficient in reducing PM10 dust.     

Effect of biological wastewater treatment on the molecular weight distribution of soluble organic compounds and on the reduction of BOD, COD and P in pulp and paper mill effluent

Pulp and paper mill wastewater was characterizated, before (influent) and after (effluent) biological wastewater treatment based on an activated sludge process, by microfiltration (8, 3, 0.45 and 0.22mum) and ultrafiltration (100, 50, 30 and 3kDa) of the wastewater samples into different size fractions. Various parameters were measured on each fraction: molecular weight distribution (MWD) using high performance size exclusion chromatography (HPSEC), total organic carbon (TOC), biochemical oxygen demand (BOD), chemical oxygen demand (COD), total phosphorus (Tot-P), phosphate phosphorus (PO(4)-P), electrical conductivity, pH, turbidity, charge quantity and zeta potential. The MWD, TOC and COD(Cr) results indicated that the majority of the material present in both the influent and effluent was in the medium molecular weight (MW) range (i.e. MW<10kDa) with three main MW sub-fractions. There were no significant differences in the range of the MWD between the influent and effluent samples. The magnitude of the MWD in the effluent was about one half that in the influent, the greatest reduction being in the 6kDa fraction. The 3kDa fractions of both the influent and effluent showed a considerable increase in BOD(7), probably due to the removal of compounds harmful to bacteria in 3kDa ultrafiltration. Influent turbidity decreased considerably in microfiltration (8-0.22mum). As the turbidity was removed by 0.22mum filtration, the anionic charge quantity started to decrease. Particles in the influent and effluent contained 19-29% and 14-20% of the total phosphorus, respectively. The major phosphorus fraction was in the form of soluble phosphate.     

Direct transmission detection of tunable mechanical resonance in an individual carbon nanofiber relay

A direct on-chip transmission measurement of the resonance frequency of an individual singly clamped carbon nanofiber relay is reported. The experimental results are in good agreement with a small signal model and show the expected tuning of the resonance frequency with changing bias voltage.     

Microchip sonic spray ionization

The first microchip version of sonic spray ionization (SSI) as an atmospheric pressure ionization source for mass spectrometry (MS) is presented. The microchip used for SSI has recently been developed in our laboratory, and it has been used before as an atmospheric pressure chemical ionization (APCI) and atmospheric pressure photoionization (APPI) source. Now the ionization is achieved simply by applying high (sonic) speed nebulizer gas, without heat, corona discharge, or high voltage. The microchip SSI was applied to the analysis of tetra-N-butylammonium, verapamil, testosterone, angiotensin I, and ibuprofen. The limits of detection were in the range of 15 nM to 4 microM. The technique was found to be highly dependent on the position of the chip toward the mass spectrometer inlet, and on the gas and the sample solution flow rates. The microchip SSI provided dynamic linearity following a pattern similar to that used with electrospray, good quantitative repeatability (RSD=16%), and long-term signal stability.     

Microchip for combining gas chromatography or capillary liquid chromatography with atmospheric pressure photoionization-mass spectrometry

We present a microfabricated nebulizer chip for combining atmospheric pressure photoionization-mass spectrometry (APPI-MS) with gas chromatography (GC) or capillary liquid chromatography (capLC). The chip consists of a silicon plate and a glass plate or two glass plates. The chip includes a sample inlet channel, auxiliary gas and dopant inlet, vaporizer channel, nozzle, and platinum heater. The sample eluted from the capLC or GC is mixed with auxiliary gas and dopant (toluene) in the heated vaporizer. The chip forms a confined jet of the sample vapor, which is photoionized as it exits the chip. The analytical performance of GC- and capLC-microchip APPI-MS was evaluated with some polycyclic aromatic hydrocarbons, amphetamines, and steroids. The GC-muAPPI-MS method provides high sensitivity down to 0.8 fmol, repeatability (RSD = 7.5-14%), and linearity (r = 0.9952-0.9987). The capLC-muAPPI-MS method shows high sensitivity down to 1 fmol, good repeatability (RSD = 3.6-8.1%), and linearity (r = 0.9989-0.9992).     

Electrostatic precipitator performance and trace element emissions from two Kraft recovery boilers

Fine particle emissions from combustion sources have gained attention recently due to their adverse effects on human health. The emission depends on the combustion process, fuel, and particulate removal technology. Particle concentrations at Kraft recovery boiler exits are very high, and the boilers are typically equipped with electrostatic precipitators (ESP). However, little data are available on the ESP performance in recovery boilers. Particle concentrations and size distributions were determined at two modern, operating recovery boilers. In addition, we determined the fractional collection efficiency of the ESPs by simultaneous measurements at the ESP inlet and outlet and the particulate emissions of trace metals. The particle mass concentration atthe ESP inlet was 11-24 g/Nm3 at the two boilers. Particle emissions were 30-40 mg/ Nm3 at boiler A and 12-15 mg/Nm3 at boiler B. The particle size distributions had a major particle mode at around 1 microm. These fume particles contained most of the particle mass. The main components in the particles were sodium and sulfate with minor amounts of chloride, potassium, and presumably some carbonate. The ESP collection efficiency was 99.6-99.8% at boiler A and 99.9% at boiler B. The particle penetration through the ESP was below 0.6% in the entire fume particle size range of 0.3-3 microm. Trace element emissions from both boilers were well below the limit values set by EU directive for waste incineration.     

Ex-ante assessment of the safety effects of intelligent transport systems

There is a need to develop a comprehensive framework for the safety assessment of Intelligent Transport Systems (ITS). This framework should: (1) cover all three dimensions of road safety—exposure, crash risk and consequence, (2) cover, in addition to the engineering effect, also the effects due to behavioural adaptation and (3) be compatible with the other aspects of state of the art road safety theories. A framework based on nine ITS safety mechanisms is proposed and discussed with regard to the requirements set to the framework. In order to illustrate the application of the framework in practice, the paper presents a method based on the framework and the results from applying that method for twelve intelligent vehicle systems in Europe. The framework is also compared to two recent frameworks applied in the safety assessment of intelligent vehicle safety systems.     

Neutral electrolyzed water (NEW), chlorine dioxide,organic acid based product,and ultraviolet‐C for inactivation of microbes in fresh‐cut vegetable washing waters

The effect of decontamination methods on fresh‐cut vegetable washing waters was evaluated. NEW, ClO₂, organic acid‐based product FPW, and UV‐C were tested with and without an interfering carrot juice of 1% (IS), on Yersinia enterocolitica and Yersinia pseudotuberculosis, Escherichia coli, and yeast Candida lambica. The use of ClO₂ (50 ppm active chlorine) resulted in >4 log reduction of Y. enterocolitica, Y. pseudotuberculosis, E. coli and >3 log reduction of C. lambica. The antibacterial effect of NEW was less effective in the presence of IS when compared with ClO_2. The inactivation of C. lambica by FPW reached a maximum of 2.8 log cfu/mL (concentration 0.125%), but the antimicrobial effect was delayed by the IS. The effect of FPW on E. coli was significantly reduced by 1% IS. The inactivation of E. coli and C. lambica with UV‐C IS decreased the inactivation and lengthened its time. Filtration improved the effect of UV‐C inactivation.

Practical applications

When chemical decontamination methods were used in fresh‐cut vegetable processing, the presence of organic matter in process water increased the reaction times and the need for higher concentrations of the chemical decontamination and the time of physical decontamination. Yersinia required longer inactivation times than E. coli. When UV‐C is used for decontamination of process waters, waters should be filtered to enhance the disinfection efficacy.