A generalized method for correcting instrument spreading in gel permeation chromatography

A general method of chromatogram correction for skewed instrument spreading in gel permeation chromatography is presented. The correction method is so general that there is no restriction on the shape of the spreading function. It admits nonsymmetric, non-Gaussian as well as nonconvolution type. Aspects of solution techniques are discussed and an illustrative example is given to elucidate the method.     

Carbon fiber structure and stability studies

A study has been made of the thermal-oxidative stability of several commercially available carbon fibers. Significant differences in the weight loss behavior were observed in air aging studies run on the bare fibers at 600°F (589 K). The stability of high temperature laminates, such as those based on NR-150 polyimide precursor solutions, was found to be directly affected by the stability of the reinforcing carbon fibers. In studies carried out to determine the reasons for carbon fiber instability, residual sodium sulfate was found to be the principle destabilizing factor. A mechanism whereby the sodium sulfate promotes the oxidation of carbon in the presence of air is proposed.     

Impact reinforcement of poly(vinyl chloride)

Several theories have been advanced to explain the toughening of glassy plastics by rubbery modifiers. These have been based primarily on studies of high impact polystyrene or ABS systems, where the crazing mechanism has been shown to be most applicable. In the present study, the effects of MBS (methacrylate-butadiene-styrene) impact modifiers on PVC have been studied, utilizing both physical and microscopic techniques. Tensile test results indicate that a primary contribution of the modifier to increased toughness is a lowering of the yield stress of the PVC. Electron microscopic studies and density determinations on strained samples indicate no crazes in these MBS-modified PVC systems. These results suggest that the mechanism of impact reinforcement in PVC is based on the enhancement of localized yielding in the vicinity of the rubbery modifier particles.     

Apparatus and procedure for measuring release rates from formulations of lepidopteran semiochemicals

An apparatus was developed wherein a vacuum source was used to pull air across a controlled-release-formulation dispenser or a planchet containing a known quantity of a semiochemical and into a collector filled with a polymeric adsorbent. After a set time, the semiochemical was eluted with solvent and was quantified by gas-liquid chromatography (GLC). High percentages of known quantities of the lepidopteran semiochemicals (Z)-7-dodecen-l -ol acetate (Z7DDA), boiling point (bp) 275 ° C/1 atm, (Z)-9-tetradecen-1-ol formate (Z9TDF), bp 289 °C/1 atm, and (Z,Z)-3,13-octadecadien-1-ol acetate (ZZODDA), bp 490 °C/1 atm, were recovered. The semiochemicals did not oxidize and were recovered quantitatively from the adsorbent. The release rates of Z9TDF from a controlled-release dispenser were found to be directly proportional to the airflow rates. Release rate measurements on the Z9TDF dispensers were made for the purpose of estimating the method's precision. The method was shown to give internally consistent results by measurements on another Z9TDF formulation. The accuracy of the method is discussed.Mention of a commercial or proprietary product in this paper does not constitute an endorsement by the USDA.     

Necrodols: Anti-insectan terpenes from defensive secretion of carrion beetle (Necrodes surinamensis)

Two compounds recently isolated from the defensive gland ofNecrodes surinamensis, -and -necrodol, first representatives of a new category of monoterpenes (the necrodanes), are shown to be repellent to ants and other insects and irritating to cockroaches and flies. The compounds doubtless play a defensive role inNecrodes. The possible long-range applied significance of research on insect repellents is discussed.Paper No. 80 of the seriesDefense Mechanisms of Arthropods. Paper No. 79 is T. Eisner et al., Experientia 42:204–207 (1986).     

Strain-Induced Deformation in Magnesia–Alumina Layered Composites

Ceramic beams are induced in situ to form complex shapes at elevated temperature without the application of an external stress. This process has been demonstrated for thin alumina substrates coated with a layer of magnesia. The internal strain causing the substrates to deform at elevated temperature arises as a consequence of strain mismatch accompanying the penetration of the coating into the substrate. The magnitude of the deformation depends on the amount of coating applied, on the thickness of the substrate, on the density of the substrate, and on the temperature. During exposure of the beams to elevated temperature, the magnesia coating reacts with the alumina substrate to form the spinel phase; the resulting volume change accompanying the phase transformation is likely the predominant driving force for deformation.     

Raman spectroscopic analysis of thecis/trans isomer composition of edible vegetable oils

A new method is presented for determining thecis/trans isomer content of edible vegetable oils. The intensities of Raman lines near 1656 and 1670 cm⁻¹ are associated with thecis andtrans configuration, respectively. A precision of ca. 1% can be obtained in thecis/trans isomer analysis of binary mixtures of methyl esters and triglycerides of monoenes and dienes and of hydrogenated vegetable oils. The spectroscopic data also provide the iodine value of vegetable oils or isolated fractions with precision for a single determination of ca. 1%. Presented at the AOCS meeting, Houston, May 1971. W. Market. Nutr. Res. Div., ARS, USDA.     

Surface properties of commercial polymer films following various gas plasma treatments

Surface properties of a number of commercial thermoplastic polymer films were investigated before and after brief exposures to RF induced, low temperature gas plasmas. Water wettability and adhesion of vapor deposited aluminum to thin films (8–12 micron) of polyethylene, polypropylene, polyester, polysulfone, polycarbonate, and polyvinylidene fluoride films were studied before and after treatments with oxygen, 96% CF₄/4% O₂, and helium plasmas. Treatment with oxygen plasmas showed the greatest change in water wettability for polyvinylidene fluoride and polypropylene films, while treatment with 96% CF₄/4% O₂ showed dramatic changes in wettability of polycarbonate, polysulfone, and polystyrene. Excellent adhesion of aluminium was found for polymers that had been previously exposed to gas plasmas.     

Laser Specular Reflectance and the Optical rms Roughness of Alumina

Using laser specular reflectance, the optical rms roughnesses (σ₀'S) of 42 polycrystalline aluminas (PCA's) were determined. From these conventional experimental results, a nomogram was constructed so that single grazing angle (α) measurements could be used to predict σ₀. Subsequently, the nomogram was reassessed using five commercially important PCA's and one single-crystal sapphire (SC). The outcomes were twofold: that this nomogram was valid for PCA's over the range of 0.28 σ₀ 0.10 μm, but that the nomogram was invalid for SC sapphire. When the conventional experimental method was compared with the nomogram method at three different single-angle values, a 1:1 correspondence was observed for α= 78°, 80°, and 82°. The present noncontact method is advocated for speed and cleanliness, particularly when a quality assurance method is desired.