Approximating Euclidean circles by neighbourhood sequences in a hexagonal grid

In this paper the nodes of the hexagonal grid are used as points. There are three types of neighbours on this grid, therefore neighbourhood sequences contain values 1, 2, 3. The grid is coordinatized by three coordinates in a symmetric way. Digital circles are classified based on digital distances using neighbourhood sequences. They can be triangle, hexagon, enneagon and dodecagon. Their corners and side-lengths are computed, such as their perimeters and areas. The radius of a digital disk is usually not well-defined, i.e., the same disk can have various radii according to the neighbourhood sequence used. Therefore the non-compactness ratio is used to measure the quality of approximation of the Euclidean circles. The best approximating neighbourhood sequence is presented. It is shown that the approximation can be improved using two neighbourhood sequences in parallel. Comparisons to other approximations are also shown.     

Customising agile methods to software practices at Intel Shannon

Tailoring of methods is commonplace in the vast majority of software development projects and organisations. However, there is not much known about the tailoring and engineering of agile methods, or about how these methods can be used to complement each other. This study investigated tailoring of the agile methods, eXtreme programming (XP) and Scrum, at Intel Shannon, and involved experienced software engineers who continuously monitored and reflected on these methods over a 3-year period. The study shows that agile methods may individually be incomplete in supporting the overall development process, but XP and Scrum complement each other well, with XP providing support for technical aspects and Scrum providing support for project planning and tracking. The principles of XP and Scrum were carefully selected (only six of the 12 XP key practices were implemented, for example) and tailored to suit the needs of the development environment at Intel Shannon. Thus, the study refutes the suggestion that agile methods are not divisible or individually selectable but achieve their benefits through the synergistic combination of individual agile practices; rather, this study shows that an a la carte selection and tailoring of practices can work very well. In the case of Scrum, some local tailoring has led to a very committed usage by developers, in contrast to many development methods whose usage is limited despite being decreed mandatory by management. The agile practices that were applied did lead to significant benefits, including reductions in code defect density by a factor of 7. Projects of 6-month and 1-year duration have been delivered ahead of schedule, which bodes well for future ability to accurately plan development projects.     

Accommodation of impurities in α-Al2O3, α-Cr2O3 and α-Fe2O3

Atomic scale computer simulation was used to predict the mechanisms and energies associated with the accommodation of aliovalent and isovalent dopants in three host oxides with the corundum structure. Here we consider a much more extensive range of dopant ions than has previously been the case. This enables a rigorous comparison of calculated mechanism energetics. From this we predict that divalent ions are charge compensated by oxygen vacancies and tetravalent ions by cation vacancies over the full range of dopant radii. When defect associations are included in the model these conclusions remain valid. At equilibrium, defects resulting from extrinsic dopant solution dominate intrinsic processes, except for the largest dopant cations. Solution reaction energies increase markedly with increasing dopant radius. The behaviour of cluster binding energies is more complex.     

Impact of pulmonary vascular stiffness and vasodilator treatment in pediatric pulmonary hypertension: 21 patient-specific fluid-structure interaction studies

Recent clinical studies of pulmonary arterial hypertension (PAH) have found correlations between increased pulmonary vascular stiffness (PVS) and poorer disease outcomes. However, mechanistic questions remain about the relationships amongst PVS, RV power, and vascular hemodynamics in the setting of progressive PAH that are difficult or impossible to answer using direct measurements. Clinically validated patient-specific computational modeling may allow exploration of these issues through perturbation-based predictive testing. Here we use a simple patient-specific model to answer four questions: how do hemodynamics change as PAH worsens? How does increasing PVS impact hemodynamics and RV power? For a patient with moderate PAH, what are the consequences if the pressures increase modestly yet sufficiently to engage collagen in those vessels? What impact does pressure-reducing vasodilator treatment have on hemodynamics? Twenty-one sets of model-predicted impedance and mean PA pressure (mPAP) show good agreement with clinical measurements, thereby validating the model. Worsening was modeled using data from three PAH outcomes groups; these show not only the expected increase in mPAP, but also an increase in pressure pulsatility. Interestingly, chronically increasing mPAP decreased WSS, suggesting that increased PA cross-sectional area affected WSS greater than increased PVS. For a patient with moderately high PVR (12.7 WU) with elastin-based upstream vascular remodeling, moving from elastin-dominant vessel behavior to collagen-dominant behavior caused substantial increases in mPAP, pressure and WSS pulsatility. For the same patient, reducing PVR through a simulated vasodilator to a value equivalent to mild PAH did not decrease pressure pulsatility and dramatically increased WSS pulsatility. Overall, these results suggest a close association between PVS and hemodynamics and that hemodynamics may play an important role in progressing PAH. These support the hypothesis that treatments should target decreasing or reversing upstream vascular remodeling in addition to decreasing mean pressures.     

A study of Cu/Low-k stress-induced voiding at via bottom and its microstructure effect

Microstructure effect of Cu/low-k interconnect, which is substantially affected by process condition or manufacturing deviation, is a dominated factors for copper stress and critical to the formation of stress-induced voiding (SIV). In this work, SIV at via bottom is studied in the aspects of thickness variation of copper interconnect and low-k dielectric. Besides, via-related factors consist of via profile and dimension are also involved in SIV sensitivity studies. With the assistance of finite element analysis (FEA), Cu stress in terms of different Cu/low-k microstructure scenarios are modelled to understand the voiding evolution and explore the their dependence with SIV susceptibility. Meanwhile, microstructure effects with and without redundant via are also simulated to evaluate their impacts on SIV immunity.     

Failure in internally pressurized bent tubes

The analysis and modeling of tube-hydroformed components is more complicated than that employed for sheet-metal panels, due to the lengthier process sequence and variable strain path—from flat-rolled sheet to tube; from straight tube to bent tube; and from bent tube to hydroformed component. These additional process steps make it difficult to determine whether post mortem analyses of tube failure during hydroforming can, and should, be conducted with the same tools and databases as used for simple stampings. To provide a partial answer, the properties of commercially fabricated welded straight tubes were evaluated using a free-expansion internal pressure test and compared with those of free-expansion internal pressure tests on bent tubes. The results demonstrated that the behavior of the bent tube was consistent with the mechanical properties of the as-received tube, provided due notice was accorded to the complex strain history of the bent tube. However, due to the strain-path changes occurring at the failure location, conventional approaches for monitoring strain history would yield (apparently) anomalous results.     

Constrained pole-placement using transformation and LQ-design

A new procedure for constrained pole-placement is presented. The poles of the closed loop system are placed within a circle in the left half plane. The design procedure is noniterative and the solution is obtained via linear quadratic (LQ) design for a transformed system. The circle can be chosen in order to obtain good transient properties of the closed loop system. The method combines the properties of pole-placement and LQ-design.     

Reference publication year spectroscopy (RPYS) of Eugene Garfield’s publications

Which studies, theories, and ideas have influenced Eugene Garfield’s scientific work? Recently, the method reference publication year spectroscopy (RPYS) has been introduced, which can be used to answer this and related questions. Since then, several studies have been published dealing with the historical roots of research fields and scientists. The program CRExplorer (http://www.crexplorer.net) was specifically developed for RPYS. In this study, we use this program to investigate the historical roots of Eugene Garfield’s oeuvre.