A 10-GB/s SONET-compliant CMOS transceiver with low crosstalk and intrinsic jitter

A 4:1 SERDES IC suitable for SONET OC-192 and 10-Gb/s Ethernet is presented. The receiver, which consists of a limiting amplifier, a clock and data recovery unit, and a demultiplexer, locks automatically to all data rates in the range 9.95-10.7 Gb/s. At a bit error rate of less than 10/sup -12/, it has a sensitivity of 20 mV. The transmitter comprises a clock multiplying unit and a multiplexer. The jitter of the transmitted data signal is 0.2 ps RMS. This is facilitated by a novel notched inductor layout and a special power supply concept, which reduces cross-coupling between the transmitter and receiver. Integrated in a 0.13-/spl mu/m CMOS technology, the total power consumption from both 1.2- and 2.5-V supplies is less than 1 W.     

Extracting electrical material parameters of electrically large dielectric objects from reverberation chamber measurements of absorption cross section

Reverberation chambers can be used to measure the absorption cross section of a dielectric object. The absorption cross section of a dielectric object depends on its size, shape, and electrical material parameters. By comparing with a theoretical model of the absorption cross section, material parameters can be extracted from measurements. A model based on a plane wave approach of incident fields is used here, valid for electrically large material samples in an isotropic environment such as that in a reverberation chamber. Which material parameter can be extracted depends on the properties of the material sample. The presented method combines the accuracy of cavity methods with the flexibility of being able to measure samples of arbitrary size and shape. Because both the reverberation chamber and the material sample are electrically large, the method is particularly useful at millimeter-wave frequencies.     

Fault and attack management in all-optical networks

Network management for optical networks faces additional security challenges that arise by using transparent optical network components in communication systems. While some available management mechanisms are applicable to different types of network architectures, many of these are not adequate for all-optical networks. These have unique features and requirements in terms of security and quality of service, thus requiring a much more targeted approach in terms of network management. In this article we consider management issues with particular emphasis on complications that arise due to the unique characteristics and peculiar behaviors of transparent network components. In particular, signal quality monitoring is still a major complication in all-optical networks. Despite new methods for detection and localization of attacks having been proposed, no robust standards or techniques exist to date for guaranteeing the quality of service in these networks. Therefore, sophisticated mechanisms that assist in managing and assessing the proper function of transparent network components are highly desirable. Accordingly, we present an algorithm for multiple attack localization and identification that can participate in some tasks for fault management of all-optical networks     

Cellulose‐Based Ionogels for Paper Electronics

A new class of biofriendly ionogels produced by gelation of microcellulose thin films with tailored 1‐ethyl‐3‐methylimidazolium methylphosphonate ionic liquids are demonstrated. The cellulose ionogels show promising properties for application in flexible electronics, such as transparency, flexibility, transferability, and high specific capacitances of 5 to 15 μF cm^?2. They can be laminated onto any substrate such as multilayer‐coated paper and act as high capacitance dielectrics for inorganic (spray‐coated ZnO and colloidal ZnO nanorods) and organic (poly[3‐hexylthiophene], P3HT) electrolyte‐gated field‐effect transistors (FETs), that operate at very low voltages (<2 V). Field‐effect mobilities in ionogel‐gated spray‐coated ZnO FETs reach 75 cm² V^?1 s^?1 and a typical increase of mobility with decreasing specific capacitance of the ionogel is observed. Solution‐processed, colloidal ZnO nanorods and laminated cellulose ionogels enable the fabrication of the first electrolyte‐gated, flexible circuits on paper, which operate at bending radii down to 1.1 mm.     

Assessment of cracks in power plant components by means of the HIDA knowledge-based system (KBS)

An important integrating task in the framework of the HIDA project was the development and application of the knowledge-based system (KBS). The system enables to assess/predict cracks in high-temperature components of power plants operating under creep and/or fatigue conditions, according to the HIDA procedure developed through the other tasks of the project. The system encompasses a comprehensive material database comprising the proprieties of the materials tested within the HIDA project and which are necessary for the analysis. It also includes a library of different component geometries. The system is built in such a way that the data (e.g. material data, component geometry, etc.) necessary for a high temperature crack assessment can be directly entered by the user or selected from the existing databases within the KBS.The HIDA procedure has been integrated in the KBS in a modular sequence, each module enabling to undertake a step of calculation and/or analysis. This structure allows the user to either run the whole procedure or just perform one single step (e.g. check C^* values). In addition, new or alternative procedures can be used, either for the assessment as a whole, or just for single steps (e.g. C^*, 2-criteria diagram, etc.). The system was developed by MPA Stuttgart, as the HIDA KBS task leader, using ALIAS shell (ALIAS — advanced life assessment system) as a basis, and then tested and applied by industrial partners in the HIDA project.The paper describes the functionality and use of the system through reporting selected application cases (CT probe, pipes, pipe bends), and demonstrates the benefits/advantage of such system within the industry.     

Picosecond semiconductor laser radar with optical amplifier

An optical range finder, which uses the same semiconductor laser as both an optical pulse source and an optical preamplifier of the reflected pulse, is reported. This method has the advantage of reducing the number of optical components that must be aligned, which makes it suitable as a picosecond laser radar in aerospace applications. The device showed a maximum optical gain of 17 dB with a dynamic range of 33 dB, and the obtained resolution was of the order of 1 mm.     

Probabilistic learning on manifolds (PLoM) with partition

The probabilistic learning on manifolds (PLoM) introduced in 2016 has solved difficult supervised problems for the “small data” limit where the number N of points in the training set is small. Many extensions have since been proposed, making it possible to deal with increasingly complex cases. However, the performance limit has been observed and explained for applications for which N is very small and for which the dimension of the diffusion-map basis is close to N. For these cases, we propose a novel extension based on the introduction of a partition in independent random vectors. We take advantage of this development to present improvements of the PLoM such as a simplified algorithm for constructing the diffusion-map basis and a new mathematical result for quantifying the concentration of the probability measure in terms of a probability upper bound. The analysis of the efficiency of this extension is presented through two applications.     

Pressurised hot water extraction with on-line particle formation by supercritical fluid technology

In this work, an on-line process for pressurised hot water extraction (PHWE) of antioxidants from plants as well as drying of the extract in one step by particle formation based on the use of supercritical carbon dioxide (SC-CO₂) has been developed. This process has been called WEPO®, water extraction and particle formation on-line. With this process, dried extracts from onion with the same composition of quercetin derivatives as non-dried extracts have been obtained as a fine powder with spherical particles from 250 nm to 4 μm in diameter. The major compounds present in the extract were quercetin-3,4′-diglucoside, quercetin-4′-glucoside and quercetin. An auxiliary inert gas (hot N₂) was used to enhance the drying process. Parameters such as temperature (120 °C), SC-CO₂ and N₂ pressures (80 and 12.5 bar, respectively) and flow rate of SC-CO₂ (10 ml/min), have been settled by trial-and-error in order to achieve a fine and constant spray formation. Water content, size and morphology, antioxidant capacity and quercetin content of the particles were studied to evaluate the efficiency of the WEPO process. Results were compared with the ones from extracts obtained by continuous flow PHWE followed by freeze-drying. Results showed that both processes gave similar results in terms of antioxidant capacity, concentration of quercetin derivatives and water content, while only WEPO was able to produce defined spherical particles smaller than 4 μm.     

Electrical stimulation of pigs-effect on pH fall, meat quality and Cathepsin B+L activity

This work was performed to evaluate the effect of electrical stimulation (ES) on pH fall and meat quality of LD and BF in Danish halothane free pigs stunned with CO(2). ES resulted in a significant drop in pH of 0.3 units in both LD and BF and 3 h lairage resulted in 0.1 units lower pH at 20 min post mortem. Lairage time did not affect and did not interact with the effect of ES on any of the measured meat quality parameters. ES did not affect the ultimate pH in LD, BF, SM and SC or internal reflection value in LD. However, ES caused higher internal reflection and drip loss in BF and increased the PSE frequency in LD (2 to 7%) and in BF (2 to 49%). The frequency of PSE areas in the centre of SM was 70% for ES pigs compared to 9% for control pigs. ES and ageing improved the tenderness and reduced the hardness in LD as well as shear force of unaged BF. The effect of ES on tenderness and hardness was approximately half the effect of ageing, but the effect of ES and ageing were additive. ES significantly increased the activities of cathepsin B+L in the myofibrillar fraction, but there were no differences in proteolytic activity in the other fractions. It is concluded that ES improves tenderness in LD and BF, but has a negative effect on the quality of BF and SM. Therefore ES is not an economically attractive alternative for improvement of tenderness in LD compared to ageing in Danish pigs. ?     

PROTEIN PRECIPITATION DURING WORT BOILING: QUALITY ASPECTS OF DIMINISHED WORT BOILING TIMES OF BREWS PREPARED FROM PROANTHOCYANIDIN-FREE OR REGULAR RAW MATERIALS

When using proanthocyanidin-free materials for the production of beer, a reduction of the wort boiling time can be considered. In worts prepared with regular malt and tannin-free hop extract there is a continuous precipitation of the malt flavanoids while in brews prepared from proanthocyanidin-free malt and regular hops there is a simultaneous extraction and removal of the hop flavanoids leading to constant levels of these hop flavanoids. The results also show that the level of Kjeldahl nitrogen in worts boiled with hops will be the same as that in worts boiled with n-hexane tannin-free hop extracts. These results and the fact that more protein precipitates in brews containing no malt or hop proanthocyanidins suggest that, unlike what is the case during the development of beer haze, polyphenols are not necessary for an effective protein precipitation during wort boiling.