Crystal lattice deformation and the mesophase in poly(ethylene terephthalate) uniaxially drawn by solid-state coextrusion

The development of crystalline and mesophase structure on drawing of poly(ethylene terephthalate) (PET) has been studied. The uniaxial drawing has been done by solid-state coextrusion from 50 to 90°C. The unit-cell parameters of stress-induced crystallites in extrudates have been determined as a function of extrusion draw ratio (EDR) up to 4.4 and at an extrusion temperature (ET) above T_g, at 70 and 90°C. The higher the EDR, the longer the c-axis chain direction, the shorter the a and b axes and the smaller the unit-cell volume. In comparison with the conventional lattice parameters obtained by Bunn and Fisher, the highest elongation of the c axis is near 10%. These features imply that the lattice of stress-induced crystallites is far from the closest packing. Coextrudates made below the T_g of PET differ markedly from those made above T_g. Wide-angle X-ray diffraction (WAXD) patterns of PET extruded at 50°C (below T_g) even at high draw ratio exhibit small and/or imperfect crystallites. They appear much as a mesophase. The distance between macromolecular chains ranges from 3.2 to 5.4 Å. The shortest value in the mesophase approaches the interplanar crystal distance of 3.4 Å for the (100) crystal face, on which the benzene rings lie. The crystalline peak separation of the PET, WAXD curve has been evaluated to obtain absolute crystallinities and the content of mesophase and amorphous phase.     

GC/MS characterization of effluents front the ozone bleaching of eucalypt kraft pulps

Concerns regarding the possible environmental effects of organochlorine by‐products from bleaching of pulp with chlorine‐based compounds have led to the pulp and paper industry developing new bleaching sequences. Ozone, oxygen and hydrogen peroxide are the main reagents in these Totally Chlorine Free (TCF) bleaching processes.

In this study, eucalypt kraft pulps from a variety of Australian wood sources were subjected to bleaching sequences comprising oxygen, ozone and hydrogen peroxide/alkali extraction stages. The aqueous liquid effluents from each stage were analyzed by GC/MS for aldehydes, ketones, alcohols, carboxylic acids and other by‐products. Pentafluorobenzyl oxime derivatives of the aldehydes and ketones were analyzed by electron impact GC/MS. The major carbonyl compounds detected were formaldehyde, glyoxal, dimethylglyoxal and acetone. An homologous series of n‐aldehydes corresponding to cleavage of ω‐3, 6, 9 and 12 unsaturated fatty acids also was detected. Aromatic aldehydes were identified in the oxygen stage and high consistency ozone stages, but not in any medium consistency ozone or post‐ozone bleach stages. In all stages a series of saturated alkyl carboxylic acids from formic to octacosanoic acid was detected. Formic and acetic acids were present in the highest yield. Only trace quantities of unsaturated fatty acids were detected. Details of these and other compounds detected are discussed.     

Guanine and plasmid DNA binding of mono- and trinuclear fac-[Re(CO)3]+ complexes with amino acid ligands

We have synthesized and fully characterized four new complexes comprising the fac-[Re(CO)3]+ moiety and the ligands NH3, L-proline (Pro), or N,N-dimethylglycine (dmGly). The reaction of [Re(H2O)3(CO)3]+ with the two amino acids gives trinuclear complexes of general formula [Re(L)(CO)3]3 (where L = amino acid). We have studied the in vitro behavior of these compounds with guanine and DNA in order to understand whether the cytotoxicity exhibited by certain rhenium complexes based on the fac-[Re(CO)3]+ core is due to the formation of nucleobase complexes and inter- or intrastrand links between DNA bases. We have performed model studies with guanine and studied the structural effects induced by different rhenium(I) tricarbonyl complexes on PhiX174 plasmid DNA by electrophoretic methods. Our results show that rhenium complexes with two available coordination sites interact with plasmid DNA to form a stable adduct that is likely to involve two bases.     

Characterization of chemicals mediating ovipositional host-plant finding byAmyelois transitella females

Ovipositional host-finding in the navel orangeworm,Amyelois transitella (Walker), is brought about by an in-flight response to host odors. Wind-tunnel studies of the response of gravid females to almonds showed that this response is mediated primarily by long-chain fatty acids, particularly oleic acid and linoleic acid. Evidence for the behavioral activity of fatty acids is based on the fact that: (1) behavioral activity of almond oil was concentrated in a single liquid chromatographic fraction whose composition was predominantly long-chain fatty acids, (2) behavioral activity was lost when either almond oil or the active fraction of that oil was treated with diazomethane, (3) full activity was elicited by a selective extraction of free fatty acids from crude almond oil, and (4) upwind response by females was elicited by a blend of synthetic oleic and linoleic acids, albeit at a level less than that elicited by almond oil. Five fatty acids identified from the almond oil were: myristic acid (1%), palmitic acid (16%), stearic acid (3%), oleic acid (58%), and linoleic (22%). Attraction to various combinations of synthetic acids was observed only when oleic acid was present, and oleic acid elicited upwind flights to the source when presented alone; however, short-range responses were enhanced by the addition of linoleic acid, which elicited no long-range orientation by itself. Despite significant levels of attraction to synthetic blends, the percentage of females flying to the source was lower than that flying to acidulated almond oil, the best natural attractant tested. Thus, although longrange response may be mediated primarily by a blend of oleic and linoleic acids, additional and as yet unidentified components must also play an important role. Long-range chemically modulated host finding in this and other generalist plant feeders is discussed with respect to current models of the evolution of host finding, and it is argued that suggestions that long-range host finding should be correlated with narrowness of host utilization are logically flawed and are not supported by our current understanding of specific examples of host finding.     

An NMR study of the dissociation of N,N′-(2-propyloximino)-4,4′-methylenebis(phenylcarbamate) and its crosslinking of polymers containing labile hydrogens. II

Nuclear magnetic resonance spectroscopy has been used to study the dissociation and reaction of N,N′-(2-propyloximino)-4,4′-methylenebis(phenylcarbamate), as a crosslinking agent for polymers containing labile hydrogens. The crosslinking of poly(acrylic acid), polyacrylamide, and poly(vinyl alcohol) was found to result upon heating each to 150°C for 10 min with this component at 2–10 wt %.     

Microstructure of high modulus solid state extruded polyethylene: 2. X-ray scattering studies of 12, 24 and 36 extrusion draw ratio

The microstructure of a series of solid state extruded polyethylene fibres was examined by wide- and small-angle X-ray scattering. By measuring absolute intensities using a two dimensional position sensitive detector, accurate values of the small-angle invariant for anisotropic samples were obtained. This measurement coupled with wide-angle X-ray scattering and d.s.c. permitted determination of the density of the noncrystalline component. The use of a two phase model for solid state extruded polyethylene is justified if consideration is given to the effective densities of the crystalline and noncrystalline phases, which change with deformation. The effective density of the crystalline phase decreases by 1% (0.999–0.990 g cm^?3) from the unextruded billet compared to a 36 draw ratio extrudate, while the noncrystalline phase density increases by 6% (0.84–0.89 g cm^?3). These changes lead to an overall decrease in the mean squared electron density fluctuation of 63%. The average axial crystallite length measured by wide-angle X-ray scattering increases with extrusion draw ratio while the SAXS long period decreases and weakens considerably. These observations and the electron microscopy results from the previous paper, (Polymer, 1982, 23, 1069), are fully consistent with the key features of the Peterlin model of fibre microstructure.     

Hydroisomerization of Renewable and Fossil n-Alkanes over Bifunctional Dealuminated ZSM-5 Catalysts

The hydroisomerization of two long-chain n-alkane mixtures was investigated over bifunctional Pt/H-ZSM-5 catalysts before and after dealumination of preshaped zeolite/binder pellets. The hydroisomerization over the dealuminated catalysts leads to more isomers and less cracking products. Consequently, higher ratios of multi- to mono-branched isomerization products are formed as expected for large- rather than medium-pore zeolites. This indicates a higher availability of space in the vicinity of the active sites and provides an attractive route to make medium-pore zeolites suitable for upgrading higher boiling hydrocarbon feeds.     

A gain and bandwidth enhanced transimpedance preamplifier for Fourier-transform ion cyclotron resonance mass spectrometry

The nature of the ion signal from a 12-T Fourier-transform ion cyclotron resonance mass spectrometer and the electronic noise were studied to further understand the electronic detection limit. At minimal cost, a new transimpedance preamplifier was designed, computer simulated, built, and tested. The preamplifier design pushes the electronic signal-to-noise performance at room temperature to the limit, because of its enhanced tolerance of the capacitance of the detection device, lower intrinsic noise, and larger flat mid-band gain (input current noise spectral density of around 1 pA/√Hz when the transimpedance is about 85 dBΩ). The designed preamplifier has a bandwidth of ~3 kHz to 10 MHz, which corresponds to the mass-to-charge ratio, m/z, of approximately 18 to 61 k at 12 T. The transimpedance and the bandwidth can be easily adjusted by changing the value of passive components. The feedback limitation of the circuit is discussed. With the maximum possible transimpedance of 5.3 MΩ when using an 0402 surface mount resistor, the preamplifier was estimated to be able to detect ~110 charges in a single scan.     

QuickBird and Hyperion data analysis of an invasive plant species in the Galapagos Islands of Ecuador: Implications for control and land use management

In the Galapagos Islands of Ecuador, one of the greatest threats to the terrestrial ecosystem is the increasing number and areal extent of invasive species. Increased human presence on the islands has hastened the introduction of plant and animal species that threaten the native and endemic flora and fauna. Considerable research on invasive species in the Galapagos Islands has been conducted by the Charles Darwin Foundation. We complement that work through a spatially- and spectrally-explicit satellite assessment of an important invasive plant species (Psidium guajava — guava) on Isabela Island that integrates diverse remote sensing systems, data types, spatial and spectral resolutions, and analytical and image processing approaches. QuickBird and Hyperion satellite data are processed to characterize the areal extent and spatial structure of guava through the following approaches: (1) QuickBird data are classified through a traditional pixel-based approach (i.e., an unsupervised classification approach using the ISODATA algorithm), as well as an Object-Based Image Analysis (OBIA) approach; (2) multiple approaches for spectral “unmixing” of the Hyperion hyper-spectral data are assessed to construct spectral end-members from QuickBird data using linear and non-linear mixture modeling approaches; and (3) landscape pattern metrics are calculated and compared for the pixel-based, object-based, and spectral unmixing approaches. The spectral–spatial characteristics of guava are interpreted relative to management strategies for the control of guava and the restoration of natural ecosystems in the Galapagos National Park.     

The diffusion decision model: theory and data for two-choice decision tasks

The diffusion decision model allows detailed explanations of behavior in two-choice discrimination tasks. In this article, the model is reviewed to show how it translates behavioral data-accuracy, mean response times, and response time distributions-into components of cognitive processing. Three experiments are used to illustrate experimental manipulations of three components: stimulus difficulty affects the quality of information on which a decision is based; instructions emphasizing either speed or accuracy affect the criterial amounts of information that a subject requires before initiating a response; and the relative proportions of the two stimuli affect biases in drift rate and starting point. The experiments also illustrate the strong constraints that ensure the model is empirically testable and potentially falsifiable. The broad range of applications of the model is also reviewed, including research in the domains of aging and neurophysiology.