Interfacial Bond Strength in SiC/C/SiC Composite Materials, As Studied by Single-Fiber Push-Out Tests

The interfacial characteristics of SiC/C/SiC composites with different fiber-coating bond strengths have been investigated using single-fiber push-out tests. Previous studies have shown that weak or strong bonds can be obtained by using as-received or treated fibers, respectively, and that the stress-strain behavior is improved with the treated fibers. This effect results from multiple branching of the cracks within the interphase. The model used to extract interfacial characteristics from nanoindentation and microindentation tests does not consider the presence of an interphase. However, the results highlight the significant effect of the interphase on the interfacial parameters, as well as the effect of roughness along the sliding surfaces. For the composite with treated fibers, the uncommon upward curvature of the push-out curves is related to different modes of crack propagation in the interphase. Different techniques are required to analyze the interfacial properties, such as nanoindentation and microindentation with push-out and push-back tests.     

The crystalline phase transformation of poly(vinylidene fluoride)/poly(vinyl fluoride) blend films

Poly(vinylidene fluoride) (PVDF), poly(vinyl fluoride) (PVF), and their blends were prepared by solution casting, followed by quenching in ice water after melting to obtain an α-crystalline phase. The films were drawn by solid state extrusion at two different drawing temperatures, 50°C and 110°C. The crystalline phases were analyzed by DSC and FTIR. In the undrawn films, the content of β-crystalline phase in the blend of PVDF/PVF 88.5/11.5 was higher than in the PVDF homopolymer, but it was lower than in the PVDF film with a draw ratio higher than 4. The α-crystalline phase in PVDF/PVF blends was mostly transformed into the β-crystalline phase beyond a draw ratio of 4, regardless of the draw temperature and PVF content. The α-crystalline phase of PVDF systematically transformed into the β-crystalline phase with increasing draw ratio. The crystallinity of PVDF/PVF blend films drawn at 110°C was higher than those drawn at 50°C. In the drawn blend films, characteristic IR bands of the α form were shifted to those of the β form and completely changed into those of β form at draw ratio of 4, regardless of the draw temperature and PVF content.     

Wood-fiber reinforcement of styrene–maleic anhydride copolymers

Styrene–maleic anhydride (SMA) copolymers containing either 7 or 14% maleic anhydride were filled with either pine flour or dry-process aspen fiber from a medium density fiberboard (MDF) plant. Material properties of the filled and unfilled SMA plastics were compared with those of aspen-fiber-filled and unfilled polystyrene (PS). The fiber-filled SMA composites were equivalent or superior to unfilled SMA in strength, stiffness, and notched Izod impact strength. Filled PS composites outperformed or matched the performance of filled SMA composites in the parameters tested. Unnotched Izod impact strength of filled polymers was generally inferior to that of the unfilled polymers. Water absorption from a 90% relative humidity exposure, a 24-h soak, and a 2-h boil showed mixed results when compared to the unfilled polymers. Dynamic mechanical analysis showed no change in glass transition temperature (T_g) after the addition of filler for either SMA or PS composites. The presence of the anhydride functionality on the polymer backbone did not appear to improve the strength of the composite. No evidence was found for chemical bond formation between the SMA and wood fiber. © 1998 John Wiley & Sons, Inc. J Appl Polym Sci 68: 1567–1573, 1998     

A non-contact method for detecting on-line industrial robot position errors using a microwave Doppler radar motion detector

To be useful, industrial robots must meet positioning accuracy requirements for their given applications. Off-line calibration generally improves robot positioning accuracy to levels needed for open-loop use in most industrial applications. Applications that require greater accuracy with respect to external assemblies generally turn to closed-loop control or passive compliance. However, industrial robot systems do not generally monitor in-process robot position to detect machine faults that can lead to product faults, scrap, machine damage, and additional costs. To achieve greater operational efficiencies, new non-invasive, non-contact methods for monitoring robot position are needed. The investigators developed a low-cost method for in-process industrial robot position monitoring using a Doppler motion detector and a statistical position error measure. The method detects position errors at robot repeatability levels.     

Dear Collegues

Editorial Introduction

Dear Collegues     

Membrane current from transmembrane potentials in complex core-conductor models

Core-conductor models, used to integrate the behavior of the longitudinal currents with the distributed voltages of electrically active tissue, have evolved for over a century. A critical step in the use of such models is the computation of membrane current from the set of distributed transmembrane potential values that exist at a given moment, where the potentials are obtained either experimentally or computationally. Over time, interest has developed in a number of substantial extensions of the original model to include such features as nonuniform spatial resistances, loop instead of linear structure, and multiple sites of extracellular stimulation. This paper concisely restates and extends the equations for calculation of transmembrane currents with the systematic inclusion of alternative cases, noting how they reduce to the standard forms. An important issue is how complex the calculation of membrane current has to be. Thus, the paper goes on to show criteria (based on the uniformity of resistance and the presence of stimulation) for deciding when membrane currents can be obtained with a relatively simple calculation with a single equation involving local variables versus with a more complex calculation involving the simultaneous solution of a (possibly large) set of equations.     

Achieving Dependability in the Configuration, Integration and Testing of Healthcare Technologies

This paper presents two case studies, which highlight the practical work involved in developing and deploying dependable healthcare systems. It shows how dependability is a thoroughgoingly practical, contexted achievement. We show how dependability is an outcome of the reasoning and argumentation processes that stakeholders engage in, in situations such as design and testing. What becomes relevant during these interactions stands as the dependability criteria that must be achieved. Furthermore, we examine the way in which different dependability criteria need to be managed, and even relatively prioritised, before finally discussing the types of work this provokes at the boundaries of organisations, particularly when integrating work and technologies.