Superconducting and normal state properties of Li1+x Ti2−x O4 spinel compounds. I. Preparation,crystallography, superconducting properties,electrical resistivity,dielectric behavior,and magnetic susceptibility

LiTi ₂ O ₄ is one end member of the homogeneity range of the spinel phase Li _1+x Ti _2–x O ₄ (0x1/3) and is superconducting at temperatures up to 13.7 K. Various measurements were carried out in order to characterize the superconducting and normal state properties of LiTi ₂ O ₄ and of other compositions within the homogeneity range of the spinel phase. These measurements establish LiTi ₂ O ₄ as ad-band superconductor and show thatT _c decreases to <1.5 K forx0.1. This disappearance of superconductivity with increasingx was found to be correlated with anomalous changes in the lattice parameter with composition, and, from electrical resistivity measurements, is tentatively attributed to the occurrence of a composition-induced metal-semiconductor transition atx0.1. The metallic character of LiTi ₂ O ₄ and the composition dependence of the observed electrical properties are shown to follow from crystallographic considerations.Research sponsored by the Air Force Office of Scientific Research, Air Force Systems Command, USAF, under AFOSR Contract Number AFOSR/F-44620-C-0017.     

A Lumped Parameter Model for Product Flow Times in Manufacturing Lines

Based upon basic drivers for the flow time, a lumped parameter model for a manufacturing line has been derived by using Kingman's approximation. The lumped parameter model for the flow time consists of a workstation and delay time. The workstation is characterized by the effective process time of the bottleneck workstation and the weighted sum of the coefficients of variation of all workstations. The delay time is determined by the sum of all effective process times of the nonbottleneck workstations. The advantage of the application of the lumped parameter model is that the variability of the total line is determined by a measurement at the operating point of the actual manufacturing line. This variability depends upon the operating point. Examples show that this dependency is not too strong for lines with a distinct bottleneck workstation in the actual line. From the derivation of the lumped parameter model it can be concluded that an improvement of the effective process time of the bottleneck workstation of the line results in an increase of the total variability of the line. This variability can be reduced by either reducing the variability of all workstations or the effective process times of the nonbottleneck workstations     

A Stress and Coping Model of Medication Adherence and Viral Load in HIV-Positive Men and Women on Highly Active Antiretroviral Therapy (HAART).

The authors tested a structural model that incorporated age, time since diagnosis, social support, coping, and negative mood as predictors of medication adherence and HIV viral load on 188 men and 134 women on highly active antiretroviral therapy (HAART). The authors used psychosocial latent factors formed from baseline measures to predict latent factors of adherence, as assessed by electronic monitoring and self-report, and viral load defined by indicators assessed over a 15-month period. Results from the model indicate that greater negative mood and lower social support are related to greater use of avoidance-oriented coping strategies. Use of these coping strategies by patients on HAART is related to poorer medication adherence and, subsequently, higher viral load. This model advances researchers' understanding of the contribution of psychosocial variables in predicting treatment adherence and disease progression in HIV-positive men and women. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

An Experimental and Theoretical Comparison of Model Selection Methods

Machine Learning - We investigate the problem of model selection in the setting of supervised learning of boolean functions from independent random examples. More precisely, we compare methods for...     

Summative evaluation of the SINCGARS Tutor

In an earlier set of studies with a different Intelligently Coached Simulation (Orey, M.A., Fan, H., Park, J., Tzeng, S., & Gustafson, K. (1995). Evaluation of Device operator in a context of a coached simulation environment), we found a retention and a transfer problem. We tried to solve these problems while building a new Intelligently Coached Simulation (the SINCGARS Tutor). The solutions to the two problems were to use an interactive conceptual model for the retention problem and we used photographs of the equipment as the visuals of the simulation. We then tested this new tutor with a group of 22 officers who were not only required to know how to operate the SINCGARS radio, but would be responsible for teaching others in their unit when their training was complete. We had one group of officers train on the real equipment, in pairs, with one instructor available for guidance. The other group of 11 learned via the SINCGARS Tutor. The post test was to put an actual radio into operation while being observed by a trained observer. Results indicate that not only did the transfer problem go away, but officers trained on the computer performed the task more accurately both initially on the immediate post test and again on a surprise four-week delayed post test. The SINCGARS Tutor was found to be a very good training solution.     

Competitive analysis of incentive compatible on-line auctions

This paper studies auctions in a setting where the different bidders arrive at different times and the auction mechanism is required to make decisions about each bid as it is received. Such settings occur in computerized auctions of computational resources as well as in other settings. We call such auctions, on-line auctions.

We first characterize exactly on-line auctions that are incentive compatible, i.e. where rational bidders are always motivated to bid their true valuation. We then embark on a competitive worst-case analysis of incentive compatible on-line auctions. We obtain several results, the cleanest of which is an incentive compatible on-line auction for a large number of identical items. This auction has an optimal competitive ratio, both in terms of seller's revenue and in terms of the total social efficiency obtained.     

Lessons and Challenges from Mining Retail E-Commerce Data

The architecture of Blue Martini Software's e-commerce suite has supported data collection, data transformation, and data mining since its inception. With clickstreams being collected at the application-server layer, high-level events being logged, and data automatically transformed into a data warehouse using meta-data, common problems plaguing data mining using weblogs (e.g., sessionization and conflating multi-sourced data) were obviated, thus allowing us to concentrate on actual data mining goals. The paper briefly reviews the architecture and discusses many lessons learned over the last four years and the challenges that still need to be addressed. The lessons and challenges are presented across two dimensions: business-level vs. technical, and throughout the data mining lifecycle stages of data collection, data warehouse construction, business intelligence, and deployment. The lessons and challenges are also widely applicable to data mining domains outside retail e-commerce.     

TRADE‐OFF BETWEEN APPROXIMATION ACCURACY AND COMPLEXITY FOR TS FUZZY MODELS

This paper proposes a transformation method that serves the trade‐off between the modelling complexity and accuracy of multi‐variable Takagi‐Sugeno fuzzy inference operator‐based modelling (TS fuzzy modelling). The relation between the number of fuzzy rules and the modelling accuracy is defined in the paper. The proposed transformation method is capable of finding the minimal number of fuzzy rules for a given accuracy of a given TS fuzzy model. A case study, focusing on a benchmark problem of fault diagnosis, developed in the framework of EC‐founded Research Training Network DAMADICS, of an actuator in a sugar factory, is presented to provide feasibility of the proposed method.     

O2 and organic semiconductors: Electronic effects

Contact potential difference (CPD) measurements of the relative work functions of a range of organic semiconductor thin films show that oxygen causes effective p-type doping (with work functions increasing 0.1–0.3 eV). This doping effect is found to be reversible by exposure to high vacuum or heating in inert atmosphere. The mechanism of doping is explained by a model, based on a reversible formation of an O-substrate charge transfer state. Conductivity measurements of p-phthalocyanine films at variable temperatures support this doping model. The oxygen doping effect is consistent with filling of tail states in the gap, as shown by the increase of activation energy of hole transport with decreased O-doping, and by the good fit between experimental data and simulations of the in-gap density of states. A model hybrid solar cell configuration also shows the effect of doping by O₂ and corroborates the fact that O-doping fills the tail states in the system.