Electron enrichment in 3d transition metal oxide hetero-nanostructures

Direct experimental observation of spontaneous electron enrichment of metal d orbitals in a new transition metal oxide heterostructure with nanoscale dimensionality is reported. Aqueous chemical synthesis and vapor phase deposition are combined to fabricate oriented arrays of high-interfacial-area hetero-nanostructures comprised of titanium oxide and iron oxide nanomaterials. Synchrotron-based soft X-ray spectroscopy techniques with high spectral resolution are utilized to directly probe the titanium and oxygen orbital character of the interfacial region's occupied and unoccupied densities of states. These data demonstrate the interface to possess electrons in Ti 3d bands and an emergent degree of orbital hybridization that is absent in parent oxide reference crystals. The carrier dynamics of the hetero-nanostructures are studied by ultrafast transient absorption spectroscopy, which reveals the presence of a dense manifold of states, the relaxations from which exhibit multiple exponential decays whose magnitudes depend on their energetic positions within the electronic structure.     

Trace Elements in the Si Furnace-Part II: Analysis of Condensate in Carbothermal Reduction of Quartz

Silicon feedstock for production of solar-grade silicon should be as pure as possible to decrease the cost of manufacturing of solar cells. Impurities in quartz, carbonaceous materials, electrodes, and refractories are mostly present in the form of oxides. These oxides can be reduced to volatile gaseous compounds in presence of SiO(g) and CO(g) atmosphere and potentially leave the furnace or stay in the condensed reaction products, metal, and slag. This work investigates the conditions under which volatile impurities report to the gas phase in laboratory experiments with lumpy and pelletized mixtures of SiO₂, SiC, and Si at 1923 K and 2123 K (1650 °C and 1850 °C), respectively, were carried out. The volatile compounds were generated by the reduction of quartz and collected in the form of condensate. The effects of the reaction temperature, quartz type, charge composition, pellets, and lumps on the composition of the condensate were studied. The trace elements in the charge input, reacting charge, and condensate were analyzed using inductively coupled plasma (ICP)-mass spectroscopy (MS) and X-ray diffraction (XRD). CO(g) and SiO(g), which are the major components in reduction reactions, formed four types of condensate: white, brown, green, and orange. The condensate constituents were amorphous SiO₂, 3C:SiC, Si, and α-quartz. Each impurity present in the quartz charge entered the gas phase during quartz reduction and was detected in the condensate. Al and Fe show limited volatility. The volatility of Mn, P, and B depends on the charge mix: a higher P_CO enhances the concentration of these elements in the gas phase. Fluid inclusions, common in hydrothermal quartz, enhance the distribution of the contaminants to the gas phase. Industrial campaigns on Si and Fe-Si production confirm the experimental results.     

洗油组分的提取、应用及前景

介绍了目前提取洗油组分的主要工艺过程及洗油中各组分的应用情况,指出我国应加强洗油加工利用的研究和其产品的开发应用:首先必需建设大型洗油加工装置,采用多种加工工艺,提取煤焦油特有的组分;其次提高洗油加工产品的纯度,获得高附加值的产品。     

Damping estimation using free decays and ambient vibration tests

This paper studies the quality of modal damping ratios estimates based on ambient and free vibration tests using both numerical simulations and data collected on large Civil Engineering structures where both tests were performed. The simulated data allowed to study the influence of factors like non-proportional damping or proximity of natural frequencies on the quality of the estimates and also to illustrate the influence of the identification algorithms parameters on the accuracy of the results. The analysis of data collected on a cable-stayed bridge, on the suspended roof of a stadium and on a footbridge permitted to compare the results of both testing approaches in real applications where some factors that cannot be realistically included in the numerical simulations can play an important role. The processing of ambient vibration responses is performed with two output-only identification approaches: frequency domain decomposition and stochastic subspace identification methods. The numerically simulated and the measured free decays were analyzed with a simple method based on filters and fitting of exponential decays and also with the use of subspace models.     

Agent-Oriented Supply-Chain Management

The supply chain is a worldwide network of suppliers, factories, warehouses, distribution centers, and retailers through which raw materials are acquired, transformed, and delivered to customers. In recent years, a new software architecture for managing the supply chain at the tactical and operational levels has emerged. It views the supply chain as composed of a set of intelligent software agents, each responsible for one or more activities in the supply chain and each interacting with other agents in the planning and execution of their responsibilities. This paper investigates issues and presents solutions for the construction of such an agent-oriented software architecture. The approach relies on the use of an agent building shell, providing generic, reusable, and guaranteed components and services for communicative-act-based communication, conversational coordination, role-based organization modeling, and others. Using these components, we show two nontrivial agent-based supply-chain architectures able to support complex cooperative work and the management of perturbation caused by stochastic events in the supply chain.     

Malocclusion traits and symptoms and signs of temporomandibular disorders in children with severe malocclusion

The present study reports the prevalence of the various traits of malocclusion, as well as the occurrence of associations between malocclusion, and symptoms and signs of temporomandibular disorders (TMD) in children selected for orthodontic treatment by the new Danish procedure for screening the child population for severe malocclusions entailing health risks. The sample comprised 104 children (56 F, 48 M) aged 7-13. Malocclusion traits were recorded at the time of selection, symptoms and signs of TMD were recorded at recall. The most prevalent malocclusion traits were distal molar occlusion (Angle Class II; 72 per cent), crowding (57 per cent), extreme maxillary overjet (37 per cent) and deep bite (31 per cent). Agenesis or peg-shaped lateral teeth were observed in 14 per cent of the children. The most prevalent symptom of TMD was weekly headache (27 per cent); the most prevalent signs of TMD were tenderness in the anterior temporal, occipital, trapezius, and superficial and profound masseter muscles (39-34 per cent). Seven per cent of the children were referred for TMD treatment. The Danish TMD screening procedure was positive in 26 per cent, while 20 per cent had severe symptoms (Aill), and 30 per cent had moderate signs (Dill) according to Helkimo (1974). Symptoms and signs of TMD were significantly associated with distal molar occlusion, extreme maxillary overjet, open bite, unilateral crossbite, midline displacement, and errors of tooth formation. The analysis suggests that there is a higher risk of children with severe malocclusions developing TMD. Errors of tooth formation in the form of agenesis or peg-shaped lateral teeth showed the largest number of associations with symptoms and signs of TMD; these associations have not previously been reported in the literature.     

On the oxidation of iron in CO2 + CO mixtures. III: Coupled linear parabolic kinetics

High-purity iron has been oxidized at 1000–1200° C in CO₂ and in CO₂ + CO with different compositions and at different total gas pressures (0.1–1 atm.). The experimental work has comprised thermogravimetric reaction rate measurements and characterization of the wüstite scales by metallography and x-ray diffraction. The overall results have been analyzed in terms of a classical model for coupled linear/parabolic kinetics, where it is assumed that the surface of growing wüstite scales has exactly the same defect structure and defect concentrations as that of bulk wüstite equilibrated in the same gaseous atmospheres. Important discrepancies are found between the predicted and the experimentally observed reaction behavior. Thus, both the linear and parabolic rate constants are found to be dependent on the partial pressure of CO₂ and the total gas pressure of the CO₂ + CO gas mixtures, and furthermore, the reaction in CO₂ + CO is slower than in O₂ and in H₂O + H₂ with the same oxygen activity. In order to explain the experimental results, it is suggested that CO and CO₂ molecules interact with the wüstite surface and thereby affect the defect structure and defect concentrations in a thin surface layer, and that this, in turn, affects both the linear and parabolic reaction rates.     

Infrastructuring in Healthcare through the OpenEHR Architecture

In Norway, a national initiative is currently aiming at standardising the electronic patient record (EPR) content based on an openEHR framework. The openEHR architecture, offers users the capability to conduct standardisation and structuration of the EPR content in a distributed manner, through an internet-based tool. Systems based on this architecture, is expected to ensure universal (also internationally) interoperability among all forms of electronic data. A crude estimate is that it is necessary to define somewhere between 1000 and 2000 standardised elements or clinical concepts (so-called archetypes), to constitute a functioning EPR system. Altogether, the collection of defined archetypes constitutes a backbone of an interoperable EPR system lending on the openEHR architecture. We conceptualize the agreed-upon archetypes as a large-scale information infrastructure, and the process of developing the archetypes as a infrastructuring effort. With this as a backdrop, we focus on the following research question: What are the challenges of infrastructuring in a large-scale user-driven standardisation process in healthcare? This question is operationalized into three sub-questions: First, how are the openEHR-based archetypes standardised in practice? Second, what is the role of daily clinical practice, and existing systems in the process of developing archetypes? Third, how may related, but supposedly independent infrastructuring projects shape each other’s progress? We contribute with insight into how power relations and politics shape the infrastructuring process. Empirically, we have studied the formative process of establishing a national information infrastructure based on the openEHR approach in the period 2012–2016 in Norway.     

On Intertext in Chemotherapy: an Ethnography of Text in Medical Practice

Building on literary theory and data from a field study of text in chemotherapy, this article introduces the concept of intertext and the associated concepts of corpus and intertextuality to CSCW. It shows that the ensemble of documents used and produced in practice can be said to form a corpus of written texts. On the basis of the corpus, or subsections thereof, the actors in cooperative work create intertext between relevant (complementary) texts in a particular situation, for a particular purpose. The intertext of a particular situation can be constituted by several kinds of intertextuality, including the complementary type, the intratextual type and the mediated type. In this manner the article aims to systematically conceptualise cooperative actors’ engagement with text in text-laden practices. The approach is arguably novel and beneficial to CSCW. The article also contributes with a discussion of computer enabling the activity of creating intertext. This is a key concern for cooperative work as intertext is central to text-centric work practices such as healthcare.     

Joining of Ceramics of Different Biofunction by Hot Isostatic Pressing

Monolithic zirconia (Z) and zirconia-hydroxyapatite (Z/HA) composites were joined by cold isostatic pressing (CIP at 300 MPa) and subsequently by glass-encapsulated hot isostatic pressing (HIP at 1225°C, 1 h and 200 MPa). The physical and mechanical properties of the materials were measured. The fracture surface was studied using a light microscope. The results indicate a strength level of the joint similar to that of the corresponding composite material (Z/HA), 845 and 860 MPa, respectively. Similar experiments with monolithic alumina (A) and alumina-hydroxyapatite (A/HA) were carried out without success. Cracking occurred in the joint area during the cold isostatic pressing process. It seems that ceramics with high green strength and similar green density are essential when joining ceramics by combined CIP and HIP processes.