Molded micro- and mesoporous carbon/silica composite from rice husk and beet sugar

A molded carbon/silica composite with high micro- and mesoporosity, as well as a high bulk density, was fabricated by activating a disk-molded precursor made from carbonized rice husk (RH) and beet sugar (BS) at 875 °C in CO₂. The pore structure of the RH- and BS-based carbon/silica composite (RBC) was analysed in relation to the bulk density. An activation time of 2.0 h provided the largest BET specific surface area (1027 m²/g) and total pore volume (0.68 cm³/g) and a low bulk density (0.54 g/cm³). An RBC that was first activated for 1 h was immersed again in BS syrup and then activated in CO₂ for 1 h. This two-step activation process provided both a high bulk density (0.69 g/cm³) and a highly textured structure (BET specific surface area, 943 m²/g; total pore volume, 0.56 cm³/g). The immersion in BS syrup was useful for improving the texture without reducing the bulk density, in comparison to one-step activation for 1.0 h. The suspension of the RBCs was basic because of the residual inorganic compounds of potassium and calcium. However, the basicity of the suspension was alleviated by washing the RBCs with water.     

Comparison of particle-phase polycyclic aromatic hydrocarbons and their variability causes in the ambient air in Ho Chi Minh City, Vietnam and in Osaka, Japan, during 2005-2006

A comparative study of polycyclic aromatic hydrocarbons (PAHs) associated with particulate matter (TSP) in the ambient air in an urban area in Ho Chi Minh City, Vietnam and in Osaka, Japan was carried out from 2005 to 2006. The objective of this study was to investigate the environmental levels, emission sources, seasonal variations and health risk of eleven PAHs in the two cities, especially Ho Chi Minh City where air pollution is becoming a serious concern. The results showed that the concentrations of TSP and total PAHs were significantly higher in Ho Chi Minh City than levels in Osaka. The concentrations of 5- and 6-ring PAHs (BeP, BbF, BkF, BaP, BghiP and InP) were much higher in TSP samples in Ho Chi Minh City than in Osaka, accounting for 82% and 51% of total PAHs, respectively. These PAHs are known to be highly carcinogenic and mutagenic in humans. Vehicular emission is suggested as one of the main pollution sources of PAHs in both cities. Motorcycles and gasoline automobiles are suggested as the main emission sources of PAHs in Ho Chi Minh City, whereas diesel automobiles are the primary source in Osaka. Seasonal variations of PAHs were observed in this study; higher concentrations of PAHs were found in the rainy season (May-December) and lower concentrations corresponded to the dry season (February-April) in Ho Chi Minh City, while higher concentrations of PAHs were observed in the winter (November-January) in Osaka. The number of sunshine hours was an important meteorological factor affecting seasonal variations of PAHs in Ho Chi Minh City, while the temperature was a main factor causing the variations of PAHs in Osaka. The high BaP equivalent concentration of 5- and 6-ring PAHs even in the ambient air is an alarming signal for harmfulness to human health and environmental quality in Ho Chi Minh City.     

Antioxidant Effects of Herbal Tea Leaves from Yacon (Smallanthus sonchifolius) on Multiple Free Radical and Reducing Power Assays,Especially on Different Superoxide Anion Radical Generation Systems

Yacon (Smallanthus sonchifolius), a native Andean plant, has been cultivated as a crop and locally used as a traditional folk medicine for the people suffering from diabetes and digestive/renal disorders. However, the medicinal properties of this plant and its processed foods have not been completely established. This study investigates the potent antioxidative effects of herbal tea leaves from yacon in different free radical models and a ferric reducing model. A hot‐water extract exhibited the highest yield of total polyphenol and scavenging effect on 1,1‐diphenyl‐2‐picryl hydrazyl (DPPH) radical among four extracts prepared with hot water, methanol, ethanol, and ethylacetate. In addition, a higher reducing power of the hot‐water extract was similarly demonstrated among these extracts. Varying concentrations of the hot‐water extract resulted in different scavenging activities in four synthetic free radical models: DPPH radical (EC₅₀ 28.1 μg/mL), 2,2′‐azinobis(3‐ethylbenzothiazoline‐6‐sulfonic acid) cation radical (EC₅₀ 23.7 μg/mL), galvinoxyl radical (EC₅₀ 3.06 μg/mL), and chlorpromazine cation radical (EC₅₀ 475 μg/mL). The yacon tea‐leaf extract further demonstrated superoxide anion (O₂^?) radical scavenging effects in the phenazine methosulfate‐NADH‐nitroblue tetrazolium (EC₅₀ 64.5 μg/mL) and xanthine oxidase assay systems (EC₅₀ 20.7 μg/mL). Subsequently, incubating human neutrophilic cells in the presence of the tea‐leaf extract could suppress the cellular O₂^? radical generation (IC₅₀ 65.7 μg/mL) in a phorbol 12‐myristate 13‐acetate‐activated cell model. These results support yacon tea leaves may be a good source of natural antioxidants for preventing O₂^? radical‐mediated disorders.     

Highly reliable oxide‐semiconductor TFT for AMOLED displays

Abstract— The stability and reliability of oxide‐semiconductor TFTs were investigated. The contact material to the oxide semiconductor affected the thermal stability of the TFT, and a molybdenum‐contact source/drain showed good stability. And the passivating film and TFT structure affected the stability against bias stress and humidity stress, and dc‐sputtered Al²O³ passivation and fully covered channel structure with an etching stopper or source/drain showed good reliability. Moreover, high photo‐stability was confirmed by the bias‐enhanced photo‐irradiation stress test. An 11.7‐in.‐diagonal qHD AMOLED display was demonstrated to provide an applicable solution for a large‐sized OLED and an ultra‐high‐definition LCD‐TV mass production.     

Biocompatibility of a-C:H film coating for synthetic vascular graft

Amorphous hydrogenated carbon (a-C:H) films have many excellent properties such as biocompatibility, anti-corrosion, and chemical stability. Therefore, there are many reports on application of a-C:H film as surface modification technique for biomaterials. However, it is difficult to deposit a-C:H film on complex structures such as artificial heart blood pump and synthetic vascular grafts. In our previous work, we have developed an electrode which is adapted to such irregular structures for plasma CVD technique.In this study, a-C:H film was deposited on a synthetic vascular graft inner-wall by r.f. plasma CVD technique with cylindrical electrode. The purpose of such coating is improvement of biocompatibility of the vascular graft. The biocompatibility of the a-C:H film was evaluated by cytocompatibility and plasma protein adhesion. For the a-C:H film deposition, cytocompatibility and protein adsorbent of the vascular grafts were improved for biological response under cell culture with mouth fibroblasts and plasma proteins (albumin, fibrinogen, and globulin), respectively. This study indicates that the a-C:H films coatings is expected to surface modification for medical appliances.     

The use of indoline dyes in a zinc oxide dye-sensitized solar cell

The effects of the position and the type of carboxyl anchor group in double rhodanine-type indoline dyes on the performance of a zinc oxide dye-sensitized solar cell were examined. The optimum position for the carboxymethyl group was on the inner rhodanine moiety; a carboxymethyl group gave optimum results among carboxymethyl, -ethyl, and -propyl derivatives.     

To Journal of Phase Equilibria and Diffusion Phase Relationship of the BaO-ZrO<Subscript>2</Subscript>-YO<Subscript>1.5</Subscript> System at 1500 and 1600 °C

Phase relationship of a BaO-ZrO₂-YO_1.5 system at 1500 and 1600 °C was examined in order to determine whether a phase separation at the composition of 15% yttrium-doped barium zirconate exists. According to a pseudoternary phase diagram of the BaO-ZrO₂-YO_1.5 system established by this work, the solubility of yttria into cubic barium zirconate at 1600 °C is 0.25 in a mole fraction of yttria (X_\textYO1.5 ) (X_{{{\text{YO}}_{1.5} }} ) . Thus, we confirmed that there is no phase separation at the composition of 15% yttrium-doped barium zirconate at 1600 °C. On the other hand, at 1500 °C, there might be a phase separation at the composition of 15% yttrium-doped barium zirconate into yttrium-doped barium zirconate where quite small amount of yttrium is doped and a new phase whose composition is close to reported BZ(II) phase.     

Numerical Analysis of the Boundary Scattering Effect on Transport Properties in Bi-Sb Nanowires

In this study, we have numerically analyzed the transport properties of Bi-Sb nanowires, taking into account wire boundary scattering. Wire boundary scattering slightly decreased the Seebeck coefficient of Bi-Sb nanowires. This effect is due to the observation that boundary scattering and the mobility ratio of L-point electrons to T-point holes in the nanowires are smaller than those in bulk Bi-Sb because the wire boundary scattering suppresses the mobilities of L-point electrons and heavy holes. The largest Seebeck coefficient for all wire diameters was obtained when the Sb concentration was 5 at.%. The effective mass approached zero near 5 at.% Sb, and the small effective mass led to a large subband shift in each band. Thus, a small effective mass enhances the quantum effect at a fixed wire diameter, even if wire boundary scattering is taken into account.     

Development of High Count Rate TES Microcalorimeters

To realize new TES imaging for high energy X-ray or gamma-ray spectrometer with a large pixel array and high count rate, we will try to develop a new radiation absorber self-adjusting the operating temperature and adopting an original reading out method of large pixel array using parallel biasing scheme. Our first prototype TES pixel using Au/Ti/Au tri-layer which consists of the small heat sensors and the radiation absorption area, and these are biased in serial. In this device, the current pulse with the decay time constant of less than 20 microseconds of incident X-rays from ⁵⁵Fe source were observed.      

Nanopillar array chip integrated with on-line stacking for fast DNA separation with high sensitivity and high resolution

Recent developments of nanofabrication techniques have created a trend switching from randomly ordered polymeric matrices, such as gel, to highly ordered sieving nanostructures in the separation of biomolecules. These nanostructures have enormous potential for fast separation of biomolecules, while nanostructure-based separation techniques suffer from critical scaling problems; they are efficient in handling less than nanoliter amounts of sample fluids, but most biomolecule samples are available in a liquid volume that is over several microliter, leading to a reduction in sensitivity and resolution. In this study, we developed a nanopillar array chip integrated with an easy and rapid on-line stacking method and achieved fast DNA separation with high sensitivity and high resolution. The developed on-line stacking method is based on the balance of two forces driven by electric fields: electroosmotic flow (EOF) and electrophoresis. The EOF mobility from the microchannel to the nanopillar-channel is drastically decreased, while, on the other hand, electrophoresis has constant mobilities in the whole length of the channels. The on-line stacking was realized at the well-balanced position of the two forces, and the on-line stacking using the nanopillar array chip can also be achieved within 10 s by just applying electric voltages without any other special reagents and materials. After applying on-line stacking using the nanopillar array chip, the relative fluorescence intensity increased 1,000-fold, and the resolution was twice as good as that without on-line stacking.