计算机集成制造系统（CIMS）国际发展动态

ＣＩＭＳ（计算机集成制造系统）是世界上高技术开发项目之一．ＣＩＭＳ是涉及广泛技术领域的复杂系统，当前的研究课题覆盖了ＣＩＭ中方法学、技术和应用领域的部分内容．本文简要讨论ＣＩＭＳ的国际发展动态．     

Microstructure-Property Correlation in AI_4C_3 Dispersion Strengthened Al Composite

The microstructure and tensile properties of Al_4C_3 dispersion strengthened Al composite fabricatedby reaction milling technique were investigated.It is indicated that the rod-like Al_4C_3 dispersoidshaving a diameter of 0.02-0.03 μm and a length of 0.1-0.3μm are formed by reaction of C with Al,and uniformly distributed in the Al matrix.The interface between Al_4C_3 and Al is clean and theinterfacial bonding is good.The matrix consists of the subgrains which have the size of 0.3-0.4μm,and most of the Al_4C_3 dispersoids are distributed on the subgrain boundaries.The 11 vol.-%Al_4C_3/Al composite exhibits an UTS (ultimate tensile strength) of 400 MPa and anelongation-to-failure of 8.0%.     

The band areas of proteins determined by fluorescent scanning in the commercial automated gel electrophoresis apparatus

An automated gel electrophoresis apparatus, recently available commercially, allows one to follow the band during electrophoresis in real time, and lends itself therefore to an evaluation of bandwidth as a function of migration time (the dispersion coefficient), resolution and band shape. These determinations assume the constancy of band area with migration time and at various gel concentrations. The purpose of the present study was to verify these assumptions. Representative proteins and sodium dodecyl sulfate (SDS)-proteins, either natively fluorescent or fluorescein carboxylate labeled, were found to exhibit band areas which approach constancy as a function of migration time in both agarose and polyacrylamide gel electrophoresis, provided that (i) the protein concentration under the band was low enough to obviate self-quenching of fluorescence; (ii) the separation of the protein of interest from contaminants had progressed sufficiently during the time at which band areas were measured; (iii) the baseline under the peak was sufficiently well defined. However, band areas decrease with increasing gel concentration. Protein peaks exhibited leading and trailing tails. The ratio of the combined tail area to total area appeared to be near-constant at varying migration times. However, that ratio increases with increasing gel concentration. The tail area does not appear to be an artifact of fluorometric detection since it is reproduced upon fluorimetric analysis of the protein eluted from gel slices after electrophoresis. However, it may be due to photochemical destruction under the conditions of repetitive fluorometric peak detection.     

Early patterning of prelimbic cortical axons to the striatal patch compartment in the neonatal mouse

The striatum receives excitatory input from virtually the entire cerebral cortex. In the adult, this input is segregated into two functionally distinct compartments of the striatum, the patch (striosome) and matrix regions. This study determined whether the patterning of corticostriatal afferents from the prelimbic cortex to the striatal patch compartment develops during the early period of collateral formation or instead at the time of peak synaptogenesis. Initial formation of corticostriatal axon collaterals was observed by embryonic day (E) 19. Quantification of corticostriatal collaterals revealed a significant increase in the number and complexity of collateral branches at postnatal day 6 as compared to E19. Concomitant with the increase in collateral branching, a heterogeneous pattern of collateralization consisting of parallel rows of corticostriatal collaterals was observed in the medial striatum. In addition to the rows, clusters of corticostriatal axons occurred more laterally. These clusters colocalized with patches of dense tyrosine hydroxylase-positive fibers, a marker for the striatal patch compartment in the neonatal mouse. Together, these data indicate that corticostriatal patterning occurs during the period of early axon collateralization resulting in a segregation of corticostriatal axon collaterals from the prelimbic cortex to the striatal patch compartment.     

GPS高程在测量中的应用

通过对高程拟合方案的建立 ,详细分析了拟合点分布不同和一次、二次函数拟合对高程拟合带来的影响 ,并提出了提高水准拟合精度的一些有效措施 ,最后就拟合的精度作了适当的分析     

工艺因素对金属封装外引线弯曲疲劳的影响

考察了金属封装外壳制造工艺对外引线弯曲疲劳的影响,发现电镀镍是导致外引线弯曲次数明显减少的最主要工艺步骤,且随镀镍层厚度的增加,弯曲次数减少。此外还讨论了外引线的氢含量和晶粒度对引线抗疲劳能力的影响。     

既有钢筋混凝土框架结构抗震加固若干问题探讨

针对钢筋混凝土框架结构抗震加固问题的复杂性 ,本文深入分析了抗震加固结构的受力特征 ,探讨了卸荷对加固构件承载力的影响 ,并针对抗震加固后的“隐含危险转移”问题提出了相应的对策。最后 ,提出了抗震加固的基本原则 ,可供结构抗震加固时参考     

大庆外围盆地侏罗纪-早白垩世早期古气候研究

为扩大勘探领域，运用古生物资料对大庆外围盆地的古气候进行了研究，外围盆地株罗纪－早白垩世早期发育的地层有早侏罗世海拉尔盆地的东宫组，中侏罗世三江盆地的绥滨断陷的绥滨组，晚侏罗世三江盆地的东荣组，虎林盆地的裴德组，七虎林组，早白垩世早期鸡西盆地，三江盆地的滴道组，城子河组、穆棱组，虎林盆地的下云山组，上云山组，在这些组中除晚株罗世东荣组，裴德组，七虎林组外，其它各组都产有比较丰富的孢粉化石，未发现孢粉化石的层位，依据植物化石，得出早株罗世东营组为潮湿的暖温带气候，中侏罗世绥滨组为潮湿的北亚热带气候，晚侏罗世为潮湿的暖温带气候，早白垩世早期滴道组，下云山组为潮湿的北亚热带气候，城子河组、上云山组为潮湿的中亚热带气候，穆棱组为潮湿的南亚热带气候。     

减粘裂化分馏塔顶系统的腐蚀及防护

辽河石化分公司减粘裂化装置改炼辽河超稠油的减压渣油后 ,分馏塔顶系统由HCl -H2 S -HCN -有机酸 -H2 O引起的电化学腐蚀严重 ,其中油水分离器局部腐蚀速率达 3.1mm/a ,12AlMoV管束的空冷器运行不足两个月即发生泄漏。塔顶系统采用BZH - 1中和缓蚀剂、无机氨BZH - 913油溶性缓蚀剂综合注剂方案 ,使腐蚀得到控制     

复相材料的循环变形行为

对三种组织状态的F-M复相钢进行了对称和非对称循环加载条件下的形变研究.结果表明,双相钢的循环变形行为,不仅与组织中位错组态的演变过程有关,同时也受循环载荷大小、类型以及加载方式所影响.分析表明,双相钢的循环硬化、软化行为主要受控于两个基本过程,即循环变形时位错组态演变的物理过程和相间分载应力的转嫁、相间残余应力变化的力学过程.