A new efficient method for one‐pot conversions of aryl carboxylic acids into nitriles without solvent

A new efficient method for synthesising nitriles, important organic reagents, is reported in this paper. In an environmentally benign solvent‐free system, aryl carboxylic acids were converted into the corresponding nitriles via one‐pot reactions, by amidation with ethyl carbamate followed by dehydration with thionyl chloride, in excellent yields. The results showed that the method has the advantages of lower cost, higher yield, less pollution and greater ease of work‐up. Copyright © 2008 Society of Chemical Industry     

Amorphous diffusion bonding of steel pipe and its impact toughness

An iron-based amorphous foil (FeNiCrSiB) was used as an interlayer for the amorphous diffusion bonding of low carbon steel pipes under argon flux. The microstructure and mechanical properties of the joint were analyzed using an electron probe micro-analyzer (EPMA), tensile test, bending test and impact test. The results show that the joint microstructure resembles that of the base metal and no precipitates form at the joint. Melting point depressants (B, Si) diffuse far away from the joint and the base metal element is homogenous across the joint. The joint impact toughness is greater than the base metal toughness and the mechanical properties of the joint are similar around the pipe.     

Preparation and photochromism of nanocomposite thin film based on polyoxometalate and polyethyleneglycol

A photochromic nanocomposite based on Keggin structure phosphomolybdic acid (PMoA) well dispersed in polyethyleneglycol (PEG) was fabricated. TEM image showed that PMoA nanoparticles with narrow size distribution were finely dispersed in polymer matrix. FT-IR results showed that the Keggin geometry of polyoxometalates was still preserved inside the composites and strong coulombic interaction was built between PMoA and polymer matrix. Under UV irradiation, the film was reduced photochemically to yield a blue species, which was in accordance with a charge-transfer mechanism.     

电镀工艺条件变化对片状铁吸收剂吸波性能的影响

通过电镀法制备片状磁性吸收剂，用SEM、XRD等手段对其进行表征。用网络分析仪测试了不同工艺条件下吸收剂样品2～18GHz的电磁参数，并结合晶粒尺寸因素研究了不同工艺条件下对吸收剂电磁参数的影响．结果表明，不同的工艺条件对吸收剂电磁参数的影响具有规律性，可通过合理配置工艺参数来提高吸收剂的吸波性能。     

Optimal diagonal precoder for multiantenna communication systems

In this paper, we examine a multiantenna single-user wireless communication system fitted with a QR-based successive cancellation receiver (QR receiver). Initially, our consideration is confined to uncoded binary phase shift keying (BPSK) signals transmitted through independent and identically distributed (IID) Rayleigh fading channels and to the design of an optimum precoder for the transmitter. For minimum feeding back of the channel state information (CSI) to the transmitter from the receiver, we stipulate the precoder to be in the form of a power loading square diagonal matrix. We proceed to develop the theory for the design of this diagonal matrix based on the minimization of the lower bound of the average bit error rate (BER) of transmission. The design obtained provides substantially lower error rates than most of other existing schemes under the same environment. The corresponding gain in signal-to-noise ratio (SNR) can be several decibels. To further improve the performance, we extend the design to include an optimal detection order of the received bits using an iterative approach. This iterative process proves to have fast convergence and results in a design providing significant SNR gain. We also propose a subchannel dropping scheme for cases in which SNR is low, and when the minimum BER precoder is equipped with this scheme, its average performance can be substantially superior to the Vertical Bell Laboratories Layered Space-Time (V-BLAST) detection. We extend our design of the optimum precoder to quadrature amplitude modulation (QAM) modulation scheme and similar performance gain has been observed.     

用于实时数据传输的滑动帧方法及其实现

根据某雷达系统对测量信号的快速传输要求,提出采用滑动帧的处理方法并在FPGA中实现,克服了传统帧处理难以满足快速传输要求的不足。阐述了滑动帧结构的构造思想,详述了滑动帧结构的特点及具体功能模块的实现。根据实际应用需求构造了滑动帧结构处理器,试验和应用结果表明设计可行有效,能充分满足实时数据传输的要求。     

EFFECT OF DIETARY SORGHUM DISTILLERY RESIDUE ON HEMATOLOGICAL CHARACTERISTICS OF CULTURED GREY MULLET (MUGIL CEPHALUS)—AN ANIMAL MODEL FOR PRESCREENING ANTIOXIDANT AND BLOOD THINNING ACTIVITIES

The sorghum distillery residue (SDR) has been an underutilized by‐product with estimated production of 150 ton/day in Kinmen, Taiwan. The objective of this study was to test for any physiological effects of SDR, thus to utilize it as a nutraceutical feed ingredient in diets for cultured fish. Hot air‐dried, wet, and dehulled‐wet sorghum distillery residue showed 63%, 90% and 97% inhibition of the hemoglobin‐catalyzed oxidation of linoleic acid compared to soybean (13%) and rice bran (78%). The feed formulated with 20% wet or dehulled‐wet sorghum distillery residue both showed an antioxidant activity of 68% being higher than the control diet (53%). Feeding these diets to cultured grey mullet for 60 days in summer (temperature ranged 24–30C), resulted in a lower hydroperoxide content in gill tissue, as shown by a chemiluminesence intensity of 1806 or 1409 mV as opposed to 2666 mV for fish fed a control diet. In winter, when the water temperature decreased to 14C, grey mullet fed a diet consisting of 10% dehulled wet sorghum distillery residue had a blood viscosity of 1.9 mPas and a hematocrit value of 33%, in contrast to 3.6 mPas and 41% for control. The blood of the control group started to aggregate in 6 h and showed hemolysis, while the mullet fed dehulled, wet sorghum distillery residue did not show blood aggregation, maintained normal fluidity and erythrocyte membrane integrity. It seems that cultured fish may have the potential as an animal model for prescreening antioxidant and blood thinning effects of food ingredients.