Fracture behavior and environmental stress cracking resistance (ESCR) of HIPS/PE blends and the effect of compatibilization on their properties

Attempts have been made to study the fracture behavior and environmental stress cracking resistance (ESCR) of HIPS/PE blends. The effect of compatibilization on their properties was also studied. EWF tests were conducted to measure the essential specific work of fracture (w_e) and non-essential specific work of fracture (βw_p). The ESCR of the samples was investigated using a special modified tensile creep test under an aggressive environment (sunflower oil). It was found that EWF methodology could be applied to uncompatibilized and compatibilized HIPS/PE blends as well as HIPS. The essential specific work of fracture of compatibilized HIPS/PE blends was higher than uncompatibilized HIPS/PE blends and pure HIPS, while its non-essential work of fracture was higher than uncompatibilized blends and lower than pure HIPS. The results also showed that the ESCR of HIPS decreases with incorporation of PE, but an effective compatibilization of this blend increases its ESCR even higher than pure HIPS. The different properties of compatibilized and uncompatibilized blends and HIPS, in EWF and ESCR tests, were attributed to the different mechanisms of fracture in these materials. The different mechanisms of fracture were justified using morphological studies performed on fracture surfaces of each sample. SEM images showed that there is a reasonable correlation between mechanisms of fracture and microstructure of the samples.     

Synthesis of pure tetragonal zirconium oxide with high surface area

Zirconium oxide (ZrO₂) with high surface area and high content of the tetragonal polymorph was prepared by precipitation from aqueous solutions under basic conditions in the presence of hexadecyltrimethylammonium bromide as surfactant. The surfactant to zirconium molar ratio, pH of precipitation, aging time and zirconium concentration in aqueous solution were optimized by the Taguchi method. The sample, prepared under optimized conditions had a high surface area of 168 m² g⁻¹ after calcination at 600 °C for 10 h. Pellets, prepared by pressing this sample and after calcination at 800 °C for 0.5 h had a surface area of 105 m² g⁻¹. X-ray diffraction analyses showed that both heat treatments gave pure tetragonal zirconium oxide.     

Position and stiffness analysis of a new asymmetric 2PRR–PPR parallel CNC machine

In this paper, structural stiffness analysis of a new 3-axis asymmetric planar parallel manipulator, a 2 P RR–P P R structural kinematic chain, is investigated. The manipulator is proposed as a tool holder for a 5-axis hybrid computer numerical control (CNC) machine. First, the structure of the robot is introduced and inverse kinematics solution is presented. Secondly, stiffness matrix of the robot is determined using a continuous method based on Castigliano’s theorem and calculation of strain energy of the robot components. This method removes the need for commonly used simplifying assumptions and, therefore, results in good accuracy. For this purpose, force and strain energy for each segment of the robot are analyzed. Finally, to verify the analytical results, commercial FEM software is used to simulate the physical structure of the manipulator. A numerical example is presented which confirms the correctness of the analytical formulations.     

An effective and efficient parallel approach for random graph generation over GPUs

The widespread usage of random graphs   has been highlighted in the context of database applications for several years. This because such data structures turn out to be very useful in a large family of database applications ranging from simulation to sampling, from analysis of complex networks to study of randomized algorithms, and so forth. Amongst others, Erd?s–Rényi _Γv,p${\Gamma }_{v,p}$ is the most popular model to obtain and manipulate random graphs. Unfortunately, it has been demonstrated that classical algorithms for generating Erd?s–Rényi based random graphs do not scale well in large instances and, in addition to this, fail to make use of the parallel processing capabilities of modern hardware. Inspired by this main motivation, in this paper we propose and experimentally assess a novel parallel algorithm for generating random graphs under the Erd?s–Rényi model that is designed and implemented in a Graphics Processing Unit (GPU), called PPreZER. We demonstrate the nice amenities due to our solution via a succession of several intermediary algorithms, both sequential and parallel, which show the limitations of classical approaches and the benefits due to the PPreZER algorithm. Finally, our comprehensive experimental assessment and analysis brings to light a relevant average speedup gain of PPreZER over baseline algorithms.     

Effect of prepolymerization on propylene polymerization

Polymerization of propylene was performed using MgCl₂. EtOH.TiCl₄.ID.TEA.ED catalyst system in hexane, where internal donor (ID) was an organic diester and external donor (ED) was a silane compound and also triethyl aluminum (TEA) as activator. A new method called isothermal/nonisothermal method (INM), a combination of isothermal and nonisothermal methods, was applied to produce the spherical polymer particles. The effects of the INM method and prepolymerization temperature on the final polymer morphology, M_w, and catalyst activity were also investigated. The morphology of the polymers was evaluated through scanning electron microscopy (SEM) images. GPC results were used for molecular weight (M_w) evaluation. It was found that the polymers had a better morphology when they were prepared using INM method. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Cadmium Selective PVC-Membranes Sensor Based on 1, 2-Bis (Quinoline-2-Carboxamido) -4-Chlorobenzene as a Neutral Carrier

The 1, 2-bis(quinoline-2-Carboxamido)-4-chlorobenzene (H₂Clbqb) was used as an excellent ionophore in the construction of a cadmium(II)-selective PVC-based membrane sensor. The influences of membrane compositions on the potentiometric response of the electrodes have been found to substantially improve the performance characteristics. The best performance was obtained with a membrane composition of (H₂Clbqb) (5%): PVC (31%): DBP (61%): NaTPB (3%). The sensor shows a Nernestian response for cadmium ions over a wide concentration range (1.0times10⁶ to 1.0 times 10^-1 mol.L^-1) with slope of 30.3 plusmn0.4 mV decade¹. The limit of detection was 8.0 times10^-7 mol.L^-1. It illustrates a relatively fast response time in the whole concentration range (< 10 s) and it can be used for at least 8 weeks without any divergence in potential. The electrode can be used in the pH range from 2.4 to 9.0. The selectivity coefficient of some alkali, alkaline earth, transition and heavy metal ions towards Cd²⁺ion have been determined. The results show proposed Cd sensor is selective over a number of mono, bi- and trivalent cations such as Pb²⁺, Fe³⁺, Ni²⁺, K⁺, and Mg²⁺. The analytical usefulness of the proposed electrode has been evaluated by its application in the determination of cadmium in real samples. It was successfully applied for the direct determination of Cd²⁺ in standard and real sample solutions.     

Electrochemical investigation of electrodeposited Fe-Pd alloy thin films

In the present study, the electrodeposition of Fe, Pd and Fe-Pd alloys, in alkaline solutions, has been investigated. Using ammonium hydroxide and trisodium citrate as the complexing agents, it has been shown that the co-deposition of Fe and Pd is achieved due to diminishing the difference between the reduction potentials of these two metals. Cyclic voltammetry results clearly show that the electrodeposition processes are diffusion-controlled and the diffusion coefficients of Fe²⁺ and Pd²⁺ are 1.11 × 10⁻⁶ and 2.19 × 10⁻⁵ cm² s⁻¹, respectively. The step potential experiments reveal that nucleation mechanism is instantaneous with a typical three-dimensional (3D) growth. At low overpotentials, addition of Pd²⁺ to Fe²⁺ solution leads to a dramatic reduction in the number of nucleation sites, due to this fact that at such overpotentials, the electrodeposition behavior of Pd²⁺ governs on the overall process. The analysis of chemical composition of the electrodeposited films and the number of nucleation sites indicate that at higher overpotential, Fe²⁺ is deposited preferentially, thus the electrodeposition of iron-palladium alloys was classified as an anomalous co-deposition.     

Optimum structured adsorbents for gas separation processes

Recent developments in separation technology by adsorption have included the development of new structured adsorbents which offer some attractive characteristics compared to a typical packed bed. These improved features include lower energy consumption, higher throughput and superior recovery and purity of product. However, the exact combination of structural, geometric parameters which yields optimum performance is unknown. This study formulates a methodology for comparison based on a variety of analytical and numerical models and uses it to examine the performance of different adsorbent configurations. In particular, monolithic, laminate and foam structures are evaluated and compared to a packed bed of pellets. The effects of physical adsorbent parameters which govern the performance of a PSA process are considered during model development. Comparisons are carried out based on mass transfer kinetics, adsorbent loading and pressure drop of a PSA system for CO₂/N₂ separation. The results indicated that structured adsorbents can provide superior throughput to packed beds provided their geometrical parameters exceed certain values. For example, laminate structures can offer superior performance to a packed bed of pellets only if the critical sheet thickness and spacing are less than about 0.2 mm. Each adsorbent structure should be designed to operate at its “optimal” velocity. When operating at velocities higher than the “optimal” value, the increase in pressure drop and length of the mass transfer zone more than offsets gains accrued through reduction in cycle time.     

Critical moisture content for microbial growth in dried food‐processing residues

BACKGROUND: Food‐processing residues are good feedstocks for biofuel and biochemical production because they have high energy content and are abundant. Year‐round biofuel and biochemical production requires proper storage to prevent microbial decomposition and thermal runaway. In this study, microbial activity of tomato pomace (TP), grape pomace (GP), fermented grape pomace (FGP) and sugar beet pulp (SBP) was monitored at nine different moisture contents. RESULTS: Maximum and cumulative respirations for each feedstock with respect to moisture content followed a sigmoidal relationship. The critical moisture content below which no microbial activity was detected for SBP, TP, FGP and GP was 24–31, 16–21, 23–33 and 43–46% (dry basis) respectively. A logarithmic relationship was observed (R² = 0.94) between critical moisture content and initial water‐soluble carbohydrate (WSC) content of the processing residues. CONCLUSION: The critical moisture content below which no microbial activity was detected and the relationship between critical moisture content and initial WSC content were determined in this study for four food‐processing residues. Both parameters permit evaluation of the potential for deterioration of food‐processing residues during storage based on moisture content and WSC content. Copyright © 2010 Society of Chemical Industry