Influence of hydrothermal modification of fibers on some physical and mechanical properties of medium density fiberboard (MDF)

Any treatment of fibers can influence properties of medium density fibreboard (MDF). In this research, the effects of hydrothermal treatment on physical and mechanical properties of MDF were studied. Industrial fibers were hydrothermally treated in a stainless steel reactor at 120, 150 and 180 °C for 0, 30 and 90 min as holding time. Test boards were made based on 0.7 g/cm³ target density, with 10 mm thickness under a pressure of 30 bar and at a temperature of 170 °C and a press time of 10 min. The boards were tested for internal bonding (IB), moduli of elasticity (MOE) and rupture (MOR), thickness swelling and water absorption. Results showed that the water absorption was not affected by the hydrothermal treatment; while the thickness swelling was improved and the boards became dimensionally stable. The MOE was slightly reduced due to the hydrothermal treatment. The MOR and the IB were significantly decreased by the hydrothermal treatment.     

A Novel Approach for Prediction of Monthly Ground Water Level Using a Hybrid Wavelet and Non-Tuned Self-Adaptive Machine Learning Model

Water Resources Management - In recent decades, due to groundwater withdrawal in the Kabodarahang region, Iran, Hamadan, hazardous events such as sinkholes, droughts, water scarcity, etc., have...     

IsomiR-eQTL: A Cancer-Specific Expression Quantitative Trait Loci Database of miRNAs and Their Isoforms

The identification of expression quantitative trait loci (eQTL) is an important component in efforts to understand how genetic variants influence disease risk. MicroRNAs (miRNAs) are short noncoding RNA molecules capable of regulating the expression of several genes simultaneously. Recently, several novel isomers of miRNAs (isomiRs) that differ slightly in length and sequence composition compared to their canonical miRNAs have been reported. Here we present isomiR-eQTL, a user-friendly database designed to help researchers find single nucleotide polymorphisms (SNPs) that can impact miRNA (miR-eQTL) and isomiR expression (isomiR-eQTL) in 30 cancer types. The isomiR-eQTL includes a total of 152,671 miR-eQTLs and 2,390,805 isomiR-eQTLs at a false discovery rate (FDR) of 0.05. It also includes 65,733 miR-eQTLs overlapping known cancer-associated loci identified through genome-wide association studies (GWAS). To the best of our knowledge, this is the first study investigating the impact of SNPs on isomiR expression at the genome-wide level. This database may pave the way for researchers toward finding a model for personalised medicine in which miRNAs, isomiRs, and genotypes are utilised.     

SiAlON–epoxy nanocomposite coatings: Corrosion and wear behavior

In this study, epoxy powder as a matrix was combined with different contents of silicon–aluminum–oxygen–nitrogen (SiAlON) nanoparticles using a planetary ball mill. Pure epoxy and nanocomposite powders were applied on the surface of plain carbon steel components by the electrostatic spraying method. Curing of the coatings was done in an oven or microwave for the appropriate time. The coating structure and morphology of the SiAlON nanoparticles were studied by scanning electron microscopy and transmission electron microscopy, respectively. The corrosion properties of the coatings were assessed by immersion, Tafel polarization, and electrochemical impedance spectroscopy tests in 3.5% NaCl solution. The results show that addition of 10 wt % SiAlON nanoparticles markedly increases the corrosion resistance of epoxy coatings. Thus, it can be inferred that the corrosion rate of these coatings is 15 to 18 times lower than that of pure epoxy samples and 8 to 11 times lower than coatings with 20 wt % SiAlON. The higher corrosion resistance of nanocomposite coatings can be attributed to the barrier properties of SiAlON nanoparticles. The tribological performance of the coatings was studied with the pin‐on‐disk test. The results of wear testing show that the samples containing 10 wt % SiAlON provide about five times more wear resistance than pure ones and about two times more than coatings with 20 wt % SiAlON. However, the coefficient of friction for nanocomposite coatings is reduced about 50% compared to the pure sample. Also, the curing process in either regime (oven or microwave) has the same effect on the corrosion and wear properties, and the coatings are completely crosslinked. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43855.     

Parametric study of a 2-d model of the nip region in a counter-rotating,non-intermeshing twin screw extruder

Within the polymer processing industry, the demand for more efficient mixing within the existing mixer geometries and keeping a tighter control over increasingly difficult applications calls for a quantitative understanding of the role of the mixer geometry on the mixing performance. An important extruder geometry to consider is the Counter-Rotating, Non-Intermeshing Twin Screw Extruder (CRTSE). Recent studies suggest that the greater than linear mixing performance in this geometry may be attributed to the flow in the nip region. Solution of the fluid dynamic equations for a 2-D model of the nip region was found in order to quantify mixing using a FEM software called FIDAP which was available to us on the CRAY X-MP supercomputer at San Diego Supercomputer Center. In order to study the effects of design parameters in the nip region, an arbitrary interface was placed in the entrance of the region. A program called “LINE” tracks the path and growth of the interface through the region. Measures of mixing are computed and compared. Effect of several design parameters on mixing performance are studied. Conclusions are presented as to the relative effect of various design parameters. Discussions regarding the measures of mixing and mixing efficiency are presented.     

Effect of ultrasound- and pulsed electric field-assisted enzymatic treatment on the recovery and quality of sunflower oil

The aim of this study was to evaluate the effect of cavitation and electroporation on enzymolysis extraction of sunflower oil. The optimum extraction conditions during 2 h under enzyme-assisted extraction (EAE) with a maximum oil yield of ≈23.70 ± 0.11% were as follows: cellulase/pectinase ratio 2:1, enzyme concentration 2%, pH 4.5, liquid/solid ratio 6:1 ml/g, and extraction temperature 40°C. Under the optimized enzymatic conditions, the application of ultrasound- (250 W) and pulsed electric field- (1.2 kV/cm; 52.4 kJ/kg) assisted enzymatic extraction for 30 min significantly increased the oil extraction yield by 91.1% and 18.6%, respectively, as compared with EAE.     

Improvement in volume resistivity and morphology of a blend of polyolefin elastomer with linear low-density polyethylene

A silane moisture-cured polyolefin elastomer/linear low-density polyethylene (LLDPE) blend was prepared through a two-step silane-grafting method (Sioplas Process) in an industrial scale twin-screw extruder. The silane-grafted compound was used to make wire and cable coatings. In this work, the effect of some interactive parameters on quality of the products prepared by the above method has been studied, while so far, there have been less experimental investigations. The volume resistivity of cross-linked compound was changed from 2.96 × 10¹⁴ to 7.41 × 10¹⁴ Ω cm with increasing LLDPE component by maximum 10 wt%. Surface morphology of the product was corrected with reduction in benzoyl peroxide (BPO) concentration from 0.2 wt% to 0.13 wt%. BPO at this level acted as an initiator in grafting reaction of vinyl trimethoxysilane. The curing condition and specimen preparation method by injection molding and/or extrusion were factors which influenced the hot-set test results at 200 °C. The results of tensile and elongation studies showed a maximum value of 9 MPa and 397% for the tests, after 6 h curing. With increases in curing time at a specified temperature, the gel content of the cross-linked compound was increased and reached its maximum value. The maximum gel content values were found to be approximately 60%, 80%, and 82% at temperatures of 25, 60, and 85 °C, respectively. The hardness, density, and tear strength of the samples did not vary significantly with the curing temperature.