Experimental analysis of the influence of the voltage waveform on ozone generation efficiency

Although the dielectric barrier discharge (DBD) has been widely considered and studied for ozone generation, only a few studies have examined the influence of the alternating voltage waveform on the ozone rate production. This paper analyses the influence of the voltage shape on the ozone concentration and the energy efficiency of a DBD cylindrical ozone generator. Three voltage signals were studied using a high-voltage amplifier: sinusoidal, triangular and rectangular signals with voltage values up to 8 kV and frequencies up to 1.1 kHz. The obtained results showed that the efficiency of the ozone generator depends strongly on the type of the voltage waveform. The maximum values of the energy efficiency and the ozone concentration were obtained with the triangular voltage signal. This wave shape configuration has been successfully used for discolouration of water contaminated by textile dye.     

Structure, infrared and Raman spectroscopic studies of new Sr0.50SbFe(PO4)3 and SrSb0.50Fe1.50(PO4)3 Nasicon phases

Two newly synthesised Sr_0.50SbFe(PO₄)₃ [Sr_0.5.] and SrSb_0.50Fe_1.50(PO₄)₃ [Sr.] phases were obtained by conventional solid-state reaction techniques at 1000 °C in air atmosphere. Their crystallographic structures were determined at room temperature from X-ray powder diffraction (XRPD) data using the Rietveld analysis. Both compounds belong to the Nasicon structural family. [Sr_0.5.] and [Sr.] crystallise in rhombohedral system with \textR[`3] {\text{R}}\overline{3} and \textR[`3] \textc {\text{R}}\overline{3} {\text{c}} space group, respectively. Hexagonal cell parameters for [Sr_0.5.] and [Sr.] are: a = 8.227(1) ?, c = 22.767(2) ? and a = 8.339(1) ?, c = 22.704(2) ?, respectively. Sr²⁺ and vacancies in {[Sr_0.50]_3a[□_0.50]_3b}_M1SbFe(PO₄)₃ are practically ordered within the two positions, 3a and 3b, of M1 sites. Structure refinements show also an ordered distribution of Sb⁵⁺ and Fe³⁺ ions within the Nasicon framework. Within the structure, each Sr_(3a)O₆ octahedron shares two faces with two Fe³⁺O₆ octahedra and each vacancy (□_(3b)O₆) site is located between two Sb⁵⁺O₆ octahedra. In [Sr]_M1Sb_0.50Fe_1.50(PO₄)₃ compound, all M1 sites are occupied by Sr²⁺ and the Sb⁵⁺ and Fe³⁺ ions are randomly distributed within the Nasicon framework. A Raman and infrared spectroscopic study was used to obtain further structural information about the nature of bonding in both selected compositions.     

Continuous size-based focusing and bifurcating microparticle streams using a negative dielectrophoretic system

Dielectrophoresis (DEP) is an electrokinetic phenomenon which is used for manipulating micro- and nanoparticles in micron-sized devices with high sensitivity. In recent years, electrode-based DEP by patterning narrow oblique electrodes in microchannels has been used for particle manipulation. In this theoretic study, a microchannel with triangular electrodes is presented and a detailed comparison with oblique electrodes is made. For each shape, the behavior of particles is compared for three different configurations of applied voltages. Electric field, resultant DEP force, and particle trajectories for configurations are computed by means of Rayan native code. The separation efficiency of the two systems is assessed and compared afterward. The results demonstrate higher lateral DEP force, responsible for particle separation, distributed wider across the channel width for triangular shape electrodes in comparison with the oblique ones. The proposed electrode shape also shows the ability of particle separation by attracting negative DEP particles to or propelling them from the flow centerline, according to the configuration of applied voltages. A major deficiency of the oblique electrodes, which is the streamwise variation of the lateral DEP force direction near the electrodes, is also eliminated in the proposed electrode shape. In addition, with a proper voltages configuration, the triangular electrodes require lower voltages for particle focusing in comparison with the oblique ones.     

Techno-economic evaluation of energy efficiency measures in high rise residential buildings in Malaysia

In this paper, a survey was conducted on a residential condominium to estimate energy use by different household appliances along the lighting energy estimation in public areas. It has been found that about 2.17 GWh of energy is used in the condominium annually by different types of household appliances and lightings in public areas. As there is significant potential to reduce the energy used, different energy savings measures have been applied and energy savings, bill savings, life cycle cost analysis have been estimated and presented in this paper. It has been found that a cumulative amount of 2.4 GWh of energy can be saved for about 10 years with the implementation of different energy savings strategies proposed for appliances and lighting in public areas. However, good maintenance practices and good energy management practices should be employed continuously to maintain high energy efficiency and high performance of the equipment used and the entire building. It has been found that some of the measures like reducing air conditioning load and reducing heat gain through window tinting are economically very viable as payback period is very short. More advantageously, some of the measures can be implemented without investing significant cost. Ultimately, a key driver in the success of energy efficiency is the education and attitude of the stakeholders in the building industry, and end users who are committed to practice energy saving measures.     

Fully Automated Inductance Measuring System Using New Fabricated Inductance Box

Decade inductance boxes are widely used in electrical laboratories for calibration of instruments that measure inductance. The main aim of this paper is to construct a new inductance box providing a huge number of automated inductance steps, which are used in the laboratories to perform full automatic calibration of inductance meters. Therefore, a new inductance box has been introduced that mainly consists of three decades. The three inductance decades have the same design, but each has its four different internal inductive elements. Each decade can generate 15 different inductance values, so it is more economical and practical compared to the other ordinary decades, which produce only 10 values by using 10 internal inductive elements. 1666 different inductance values can be obtained from this inductance box, while 4096 inductance values can be obtained by the possible combinations of its three decades steps. Practical design, fabrication and specifications of this new inductance box are demonstrated in detail. It is designed to achieve relative accuracy in the range from 5 × 10^?4 to 5 × 10^?3. It could be used to perform full automatic inductance measurements at the National Institute of Standards, Egypt, for the first time. Comparison between an ordinary inductance box and the new introduced one has been made to validate its performance.     

Development of a fluidized bed thermogravimetric analyzer

A new fluidized bed thermogravimetric analyzer (FB‐TGA) was developed that introduces two major particularities: the pseudo variation of the weight of the reactor and the special strategy for gas flow rate adjustment according to temperature. A momentum balance was performed on the reactor and the pseudo variation of the reactor weight was evaluated by measuring the pressure drop through the gas distributor and filter. The real weight loss of the reactor was obtained by subtracting the pseudo variation of the weight from the total weight loss measured by the load cell. In addition, a special program for the gas flow rate as a function of temperature was developed and used; so the minimum fluidization regime is maintained throughout all of the experiments. The validation test of the FB‐TGA was carried out on calcium hydroxide decomposition, and the results were compared with those obtained from the conventional TGA. Diffusion control was suppressed by the application of the FB‐TGA, which was confirmed by the x‐ray diffraction analysis on the treated samples. © 2014 American Institute of Chemical Engineers AIChE J, 61: 84–89, 2015     

Toward the prediction of porous membrane permeability from morphological data

One of the challenges in membrane technology is predicting permeability in porous membranes for liquid applications in an easy and inexpensive way. This is the aim of this work. To achieve this objective, several techniques can be considered. In this study, a morphological approach from two‐dimensional scanning electron micrographs is proposed. First, numerical membrane morphological parameters have been determined from micrographs by using the QUANTS tool, which applies a texture recognition process. Second, the obtained data have been fit to the Darcy's and Hagen–Poiseuille models to calculate permeations. The QUANTS results have also been compared with the ones obtained through a mercury porosimeter, which is a classic and well‐known methodology. Each parameter of the Hagen–Poiseuille model has been analyzed. A comparison between experimentally measured permeations and calculated ones has been performed. An even easier approach is proposed to predict flow rate with the only knowledge of membrane surface mean pore size. This method is based on cross‐section pore size interpolation by using function fits from surface mean pore sizes. The obtained results show a reasonable agreement between measured and computed results, making this technique a valid approach for predicting membrane permeability. POLYM. ENG. SCI., 56:118–124, 2016. © 2015 Society of Plastics Engineers     

Experimental evaluation of quinolinium and isoquinolinium derivatives as corrosion inhibitors of mild steel in 0.5 M H<Subscript>2</Subscript>SO<Subscript>4</Subscript> solution

The 1-methylquinolinium iodide (I) Qui⁺, I^– and 2-methylisoquinolinium iodide isoQui⁺, I^– were investigated as a corrosion inhibitors for mild steel in sulfuric acid using electrochemical impedance spectroscopy and potentiodynamic polarization techniques. The results indicated that the corrosion inhibition efficiency and extent of surface coverage were increased with increase in inhibitors concentrations. Polarization curves revealed that both inhibitors acted as a mixed-type inhibitor. The thermodynamic parameters were evaluated for corrosion inhibition process. The adsorption of both inhibitors on mild steel surface obeyed Langmuir adsorption isotherm.     

Bioactive and Physicochemical Properties of Persimmon as Affected by Drying Methods

In this study, the effects of three different drying methods (freeze drying, oven drying, and vacuum oven drying) on bioactive (total phenolics, total flavonoids, condensed tannin and total hydrolyzable tannin contents, antiradical activity, and antidiabetic activity) and some physicochemical (dry matter, ash, water activity (a _w ), color, protein, hydroxymethylfurfural, glucose and fructose content) properties of persimmon fruit were investigated. Simplex lattice mixture design methodology was applied to determine the best solvent mixture for the extraction of phenolics from the samples. It was found that the mixture of acetone:water at the ratio of 50:50 % (v/v) was the best solvent mixture for the extraction. The persimmon powder sample obtained from freeze drying showed significantly (p <0.05) higher bioactivity values than oven- and vacuum-oven-dried samples. Antiradical activity changed significantly depending on the drying method employed and it was superior in freeze-dried samples than that of the other drying methods.