Removal of bisphenol A and 17α-ethinyl estradiol from landfill leachate using single-walled carbon nanotubes

In this study, the adsorption of bisphenol A (BPA) and 17α-ethinyl estradiol (EE2) from landfill leachate onto single-walled carbon nanotubes (SWCNTs) was investigated. Different leachate solutions were prepared by altering the pH, ionic strength, and dissolved organic carbon (DOC) in the solutions to mimic the varying water conditions that occur in leachate during the various stages of waste decomposition. The youngest and oldest leachate solutions contained varying DOC and background chemistry and were represented by leachate Type A (pH = 5.0; DOC = 2500 mg/L; conductivity = 12,500 μS/cm; [Ca²⁺] = 1200 mg/L; [Mg²⁺] = 470 mg/L) and Type E (pH = 7.5; DOC = 250 mg/L; conductivity = 3250 μS/cm; [Ca²⁺] = 60 mg/L; [Mg²⁺] = 180 mg/L). These solutions were subsequently combined in different ratios to produce intermediate solutions, labeled B-D, to replicate time-dependent changes in leachate composition. Overall, a larger fraction of EE2 was removed as compared to BPA, consistent with its higher log K_OW value. The total removal of BPA and EE2 decreased in older leachate solutions, with the adsorptive capacity of SWCNTs decreasing in the order of leachate Type A > Type B > Type C > Type D > Type E. An increase in the pH from 3.5 to 11 decreased the adsorption of BPA by 22% in young leachate and by 10% in old leachate. The changes in pH did not affect the adsorption of EE2 in the young leachate, but did reduce adsorption by 32% in the old leachate. Adjusting the ionic strength using Na⁺ did not significantly impact adsorption, while increasing the concentration of Ca²⁺ resulted in a 12% increase in the adsorption of BPA and a 19% increase in the adsorption of EE2. DOC was revealed to be the most influential parameter in this study. In the presence of hydrophilic DOC, represented by glucose in this study, adsorption of the endocrine disrupting compounds (EDCs) onto the SWCNTs was not affected. In the absence of SWCNTs, hydrophobic DOC (i.e., humic acid) adsorbed 15-20% of BPA and EE2. However, when the humic acid and SWCNTs were both present, the overall adsorptive capacity of the SWCNTs was reduced. Hydrophobic (π-π electron donor-acceptor) interactions between the EDCs and the constituents in the leachate, as well as interactions between the SWCNTs and the EDCs, are proposed as potential adsorption mechanisms for BPA and EE2 onto SWCNTs.     

Studies on mechanical and biodegradability properties of PVA/lignin blend films

The mechanical and biodegradation properties of polyvinyl alcohol/lignin blended films have been studied. The biodegradable composite films were developed by mechanical mixing followed by film casting method using poly (vinyl alcohol) (PVA), with lignin in different compositions. The progress of biodegradation was evidenced by means of the soil burial test. There was also an evaluation of the weight loss of the samples at the end of the biodegradation process. Blending the PVA with lignin improves tensile strength and the modulus of elasticity and causes a slight decrease in the elongation at break. The best tensile mechanical properties of a PVA/lignin blend were at ratio 2:30 where the tensile strength was 38 MPa, elastic modulus 83.22 MPa and elongation at break 213.9%. Blends of various PVA/lignin ratios have shown transparency, flexibility and good mechanical properties. Film composites also showed good biodegradability. The addition of lignin to the PVA matrix increases the degradation rate of the blends. The weight loss is affected by the composition of the blend, and by the nature of the microorganisms in the soil. PVA/lignin film may be potentially suitable as eco-friendly packaging materials.     

Microgravity Modifies the Phenotype of Fibroblast and Promotes Remodeling of the Fibroblast–Keratinocyte Interaction in a 3D Co-Culture Model

Microgravity impairs tissue organization and critical pathways involved in the cell–microenvironment interplay, where fibroblasts have a critical role. We exposed dermal fibroblasts to simulated microgravity by means of a Random Positioning Machine (RPM), a device that reproduces conditions of weightlessness. Molecular and structural changes were analyzed and compared to control samples growing in a normal gravity field. Simulated microgravity impairs fibroblast conversion into myofibroblast and inhibits their migratory properties. Consequently, the normal interplay between fibroblasts and keratinocytes were remarkably altered in 3D co-culture experiments, giving rise to several ultra-structural abnormalities. Such phenotypic changes are associated with down-regulation of α-SMA that translocate in the nucleoplasm, altogether with the concomitant modification of the actin-vinculin apparatus. Noticeably, the stress associated with weightlessness induced oxidative damage, which seemed to concur with such modifications. These findings disclose new opportunities to establish antioxidant strategies that counteract the microgravity-induced disruptive effects on fibroblasts and tissue organization.     

A Novel Sprague-Dawley Rat Model Presents Improved NASH/NAFLD Symptoms with PEG Coated Vitexin Liposomes

Chronic liver disease (CLD) is a global threat to the human population, with manifestations resulting from alcohol-related liver disease (ALD) and non-alcohol fatty liver disease (NAFLD). NAFLD, if not treated, may progress to non-alcoholic steatohepatitis (NASH). Furthermore, inflammation leads to liver fibrosis, cirrhosis, and hepatocellular carcinoma. Vitexin, a natural flavonoid, has been recently reported for inhibiting NAFLD. It is a lipogenesis inhibitor and activates lipolysis and fatty acid oxidation. In addition, owing to its antioxidant properties, it appeared as a hepatoprotective candidate. However, it exhibits low bioavailability and low efficacy due to its hydrophobic nature. A novel rat model for liver cirrhosis was developed by CCL4/Urethane co-administration. Vitexin encapsulated liposomes were synthesized by the ‘thin-film hydration’ method. Polyethylene glycol (PEG) was coated on liposomes to enhance stability and stealth effect. The diseased rats were then treated with vitexin and PEGylated vitexin liposomes, administered intravenously and orally. Results ascertained the liposomal encapsulation of vitexin and subsequent PEG coating to be a substantial strategy for treating liver cirrhosis through oral drug delivery.     

Void Nucleation and Growth in Dual-Phase Steel 600 during Uniaxial Tensile Testing

Commercial dual-phase (DP) steel in sheet form and comprised of ferrite, martensite, and bainite was subjected to uniaxial tension up to fracture. The damage characteristics were studied through extensive quantitative metallography and scanning electron microscope (SEM) observations of polished sections and fracture surfaces of failed specimens. The observed void nucleation mechanisms include nucleation at the martensite/ferrite interface or triple junction (most predominant), nucleation due to the cracking of martensite particles, and nucleation at the inclusions. The void characteristics in terms of area fraction, void density, void size ranges, and void orientations were analyzed as a function of thickness strain from various regions of the different uniaxial tensile test specimens taken to fracture. The damage analysis suggests that the void nucleation occurs during the entire deformation process with an almost constant rate and this rate reduces before fracture. A nucleation strain of 0.15 has been estimated for this material.     

Iron determination by FAAS in fish feed and feces after ultrasound-assisted extraction

This paper proposes a method to determine iron in samples of fish feed and feces using ultrasound in the extraction of the analyte and in subsequent quantification by flame atomic absorption spectrometry. Using HCl 0.10 mol L⁻¹ as the extraction solution, the optimal conditions of extraction were found to be: granulometry of the sample <60 μm; a sonication time of five cycles of 10 s and sonication power of 136 W. The method was applied in studies of the availability of iron in four food sources used in the diet of Nile Tilapia. The results obtained with the proposed extraction method allowed us to calculate the coefficients of apparent digestibility of iron in the food sources, which was not possible when using results obtained from samples mineralized by acid digestion.     

Pricing mechanism for interconnection between phone operators and virtual mobile VoIP operators

Lately software based virtual mobile voice over Internet Protocol (VMVoIP) services have become available to end-users which may endanger profit of regular telephone operators from phone calls. In this situation, telephone operators should decide on a proper mechanism for interconnection with such VMVoIP operators which secures mutual benefit of both operators. In this paper, we study both monopolistic and oligopolistic markets of VMVoIP in which a single VMVoIP and several VMVoIP operators available in the market respectively. We model the interaction among a phone operator, VMVoIP operators and end-users as a leader-follower dynamic game and find a sub-game perfect Nash equilibrium (SPNE) for the game. The SPNE shows the phone operator’s best pricing strategy (i.e., wholesale price for VMVoIP operators and retail price for end-users) and its best decision on the interconnection with VMVoIP operators. We further study economic interpretation of the SPNE. We show that in specific end-users’ demands, the phone operator may increase its total profit by allowing the interconnection and taking right price discrimination strategy.     

Determination of Activity Coefficients of Semi-Volatile Organic Aerosols Using the Integrated Volume Method

We demonstrate the use of the Integrated Volume Method (IVM) to estimate activity coefficients of semi-volatile organic compounds pertinent to ambient/atmospheric aerosols in binary mixtures. We generate binary solution aerosols with different mole fractions of individual components; for each mixture, we measure total change in aerosol volume upon heating from 25 ^○ C to 35 ^○ C, with the aerosols being at equilibrium in both states. The change in aerosol volume, or in other words, the partitioning between the particle phase and the gas phase, is used to determine activity coefficients of the compounds as a function of their mole fraction in the mixture. We demonstrate this method using the following four model systems. System 1: adipic acid–pimelic acid, which illustrates polar organic–polar organic interactions. Non-ideal behavior was observed with activity coefficients around three at infinite dilution. System 2: adipic acid–dioctyl sebacate, which illustrates polar organic–non-polar organic interactions. The compounds in this experiment did not form a solution. System 3: adipic acid–ammonium sulfate, which illustrates polar organic–inorganic interactions. The compounds in this experiment did not form a solution. System 4: adipic acid–ambient extracts, which illustrates the potential use of the method to study partitioning behavior of individual components in a complex matrix approximating that of real ambient aerosol. The measured activity coefficients of adipic acid were less than unity for the tested range of mixing ratios, indicating suppression of volatility of this compound in ambient organic matrix.     

The Nyquist robust sensitivity margin for uncertain closed‐loop systems

The Nyquist robust sensitivity margin is proposed as a new scalar indicator of robust stability that also provides a meaningful quantitative assessment of the worst sensitivity realized by the uncertain closed loop. After formulating and discussing in detail the underlying optimization problem required for the calculation of the margin, the approach is applied to the characterization of the robust stability of a closed‐loop featuring a linear system with an affine uncertainty structure and a parametric uncertainty set described by a real rectangular polytope. The capabilities of the methodology are illustrated through examples, which include an approach for quantifying alternative robustness margins, such as a parametric stability margin. The computational algorithm is systematic and can be carried out with high numerical precision. Copyright © 2005 John Wiley & Sons, Ltd.     

An approach for high-yield requirements capture for e-commerce and its application

Web-based e-commerce software is typically real-time, responsive, and distributed software that must meet high quality requirements. Moreover, because of its Internet-based operating environment, e-commerce software must deal with concurrency, synchronization, and non-deterministic issues (such as delays) primarily caused by the heavy usage load and underlying network conditions. In this paper, we introduce a generic, cost-effective approach to optimize requirements capture (and subsequent development and testing) with respect to functional coverage and customer perception of quality. This high-yield approach is presented and illustrated by application to an e-commerce online shopping system and used to explain the principles of use-case requirements captured in the unified modeling language. Published online: 25 July 2001