Effect of thermal treatments on the degradation of antibiotic residues in food

The thermal stability of antibiotics commonly detected in food is reviewed. To quantify degradation, 2 major techniques have been reported: liquid chromatography-based methods and microbiological tests. As the degradation products may also display some antimicrobial activity, microbiological tests may not be considered accurate analytical methods for quantifying antibiotic residues' degradation. Degradation percentages are summarized for different antibiotics and for various media (water, oil, milk, and animal tissues). Studies presented in the literature confirm that the thermal degradation of β-lactams, quinolones, sulfonamides, and tetracyclines can be described using a first-order kinetic model. Degradation rates, k, derived for this model for liquid matrix (water) at 100 °C, followed the general trend amongst antibiotic classes: β-lactams = tetracyclines (most heat-labile) > lincomycin > amphenicols > sulfonamides > oxfendazole > levamisole (most heat-stable). Although thermal processing results in a decrease in the concentration of parent antibiotic residues, degradation by-products have not been properly characterized to date. As some of these products were shown to be hazardous, further investigation is needed to determine their impact on food safety and human health. It is therefore currently difficult to definitively conclude whether or not antibiotic degradation during food processing is necessarily beneficial in terms of food safety.     

Honeycomb-like polyaniline for flexible and folding all-solid-state supercapacitors

Porous polyaniline (PANI) was prepared through an efficient and costeffective method by polymerization of aniline in the NaCl solution at room temperature. The resulting PANI provided large surface area due to its highly porous structure and the intercrossed nanorod, resulting in good electrochemical performance. The porous PANI electrodes showed a high specific capacitance of 480 F·g^-1, 3 times greater than that of PANI without using the NaCl solution. We also make chemically crosslinked hydrogel film for hydrogel polymer electrolyte as well as the flexible supercapacitors (SCs) with PANI. The specific capacitance of the device was 234 F·g^-1 at the current density of 1 A·g^-1. The energy density of the device could reach as high as 75 W·h·kg^-1 while the power density was 0.5 kW·kg^-1, indicating that PANI be a promising material in flexible SCs.     

Design and evaluation of carbon nanotube based optical power limiting materials

Optical power limiters (OPLs) are "smart materials" that follow passive approaches to provide laser protection. They have the potential for protecting optical sensors and possibly even human eyes from laser-pulse damage. Optical power limiting has been a subject of increasing interest for more than two decades now. The interest is due to the increasingly large number of applications based on lasers that are currently available. Several research groups have been attempting to develop novel OPL materials based on nonlinear optical (NLO) chromophores. As a result, there are a large number of publications and patents on this subject. To date, however, there is not a single OPL material available which, taken individually, can provide ideal and smooth attenuation of an output beam. Therefore, the design and development of radically new types of materials for OPL is urgently required. During the last few years, materials containing carbon nanotubes (CNTs) have established themselves as some of the best-performing optical limiters; however, such materials are difficult to prepare and have issues with stability. In this review, the origin of OPL as well as the mechanisms of OPL are discussed. Ways to modify CNTs to make them suitable for OPL applications is also discussed.     

Protein Tyrosine Phosphatases: Mechanisms in Cancer

Protein tyrosine kinases, especially receptor tyrosine kinases, have dominated the cancer therapeutics sphere as proteins that can be inhibited to selectively target cancer. However, protein tyrosine phosphatases (PTPs) are also an emerging target. Though historically known as negative regulators of the oncogenic tyrosine kinases, PTPs are now known to be both tumor-suppressive and oncogenic. This review will highlight key protein tyrosine phosphatases that have been thoroughly investigated in various cancers. Furthermore, the different mechanisms underlying pro-cancerous and anti-cancerous PTPs will also be explored.     

Introducing Metal–Organic Frameworks to Melt Electrowriting: Multifunctional Scaffolds with Controlled Microarchitecture for Tissue Engineering Applications

Scaffolds with multiple advantageous biological and structural properties are still a challenge in the field of tissue engineering. The convergence of advanced fabrication techniques and functional materials is key to fulfill this need. Melt electrowriting (MEW) is an additive manufacturing technique that enables the fabrication of microfibrous scaffolds with precisely defined microarchitectures. Here, it is proposed to exploit metal–organic frameworks (MOFs) to efficiently introduce multifunctionalities by combining polycaprolactone (PCL), the gold standard material in MEW, with a silver-/silver-chloride-decorated iron-based MOF (NH₂-MIL-88B(Fe)). This results in highly ordered constructs with antibacterial properties and magnetic resonance imaging (MRI) visibility. Scaffolds with up to 20 wt% MOF are successfully melt-electrowritten with a fiber diameter of 50 µm. Among these, 5 wt% MOF proves to be the optimal concentration as it exhibits silver-induced sustained antibacterial efficacy while maintaining PCL cytocompatibility and in vitro immune response. The iron component of the MOF (Fe(III) nodes) renders the composite visible with MRI, thereby enabling scaffold monitoring upon implantation with a clinically accepted method. The combination of MEW and MOFs as tunable additives and cargo carriers opens the way for designing advanced multifunctional scaffolds with a wide range of applications in, e.g., tissue engineering, biosensing and drug delivery.     

Elimination of polyphenols toxicity from olive mill wastewater sludge by its co-composting with sesame bark

Olive mill wastes represent a significant environmental problem in Mediterranean areas where they are generated in huge quantities in a short period of time. Their high phenol, lipid and organic acid concentrations turn them into phytotoxic materials, but these wastes also contain valuable resources such as a large proportion of organic matter and a wide range of nutrients that could be recycled. Composting is one of the technologies used for the valorization of this effluent, producing a fertilizer useful for poor soils.The present work deals with the changes that occur in the content of phenolic compounds and the biotoxicity of the oxidized substrate which result from the composting of olive mill wastewater (OMW) sludge with sesame bark. The total organic matter decreased 52.72% while water-soluble phenol degradation decreased 72% after 7 months of processing. Gas chromatography coupled with mass spectroscopy was used to confirm the elimination of polyphenols during composting. Initially, the analysis showed three abundant polyphenolic compounds, one of which was identified as the 4-hydroxyphenyl-ethanol (tyrosol), a well-known antioxidant in OMW. After 7 months of composting, all of the phenolic compounds disappeared. The phytotoxic effects of OMW sludge, assessed by the plant index germination, increased during the composting to reach 80% after 210 days. This trend was confirmed by the correlation between physico-chemical and toxicity parameters. The results obtained confirmed the stability of the compost prepared from OMW sludge with sesame bark and indicated a gradual detoxification as the compost matured.     

Biological activity during co-composting of sludge issued from the OMW evaporation ponds with poultry manure-Physico-chemical characterization of the processed organic matter

Olive mill sludge (OMS), a by-product resulting from natural evaporation of olive oil processing effluent, poses a major environmental threat. A current cost-effective practice of OMS management is composting. A mixture of OMS (60%) with poultry manure (PM) was successfully composted for 210 days. During the process, effluents of olive oil mill and confectionary were used to keep moisture at optimal level (40-60%). Biological indicators reflecting stability of the compost (microbial biota respiration and enumeration, and germination index) were analysed for the assessment of the product quality. The composted mixture showed a high microbial activity with a succession of microbial populations depending on the temperature reached during the biodegradation. The pathogen content from PM decreased with composting as did phytotoxic compounds. Phenols and lipids were reduced, respectively, by 40% and 84% while germination index increased with composting progress. Fourier transform infrared (FTIR) spectroscopic analysis revealed that the final compost improved the aromatic content compared to the starting materials, with a decrease in aliphatic groups and a reduction in the easily assimilated components by the microflora acting during the biological process. The final compost was characterized by relatively high organic matter content (26.21%), a low C/N ratio (16.21), an alkaline pH (8.32), a relatively high electrical conductivity (9.21mS/cm) and a high level of nutrients. The germination index for Lepidium sativum L. was 87.71% after 210 days of composting, showing that the final compost was not phytotoxic.     

Novel Slippery Liquid-Infused Porous Surfaces (SLIPS) Based on Electrospun Polydimethylsiloxane/Polystyrene Fibrous Structures Infused with Natural Blackseed Oil

Hydrophobic fibrous slippery liquid-infused porous surfaces (SLIPS) were fabricated by electrospinning polydimethylsiloxane (PDMS) and polystyrene (PS) as a carrier polymer on plasma-treated polyethylene (PE) and polyurethane (PU) substrates. Subsequent infusion of blackseed oil (BSO) into the porous structures was applied for the preparation of the SLIPS. SLIPS with infused lubricants can act as a repellency layer and play an important role in the prevention of biofilm formation. The effect of polymer solutions used in the electrospinning process was investigated to obtain well-defined hydrophobic fibrous structures. The surface properties were analyzed through various optical, macroscopic and spectroscopic techniques. A comprehensive investigation of the surface chemistry, surface morphology/topography, and mechanical properties was carried out on selected samples at optimized conditions. The electrospun fibers prepared using a mixture of PDMS/PS in the ratio of 1:1:10 (g/g/mL) using tetrahydrofuran (THF) solvent showed the best results in terms of fiber uniformity. The subsequent infusion of BSO into the fabricated PDMS/PS fiber mats exhibited slippery behavior regarding water droplets. Moreover, prepared SLIPS exhibited antibacterial activity against Staphylococcus aureus and Escherichia coli bacterium strains.     

Chemical Fingerprinting of Heat Stress Responses in the Leaves of Common Wheat by Fourier Transform Infrared Spectroscopy

Wheat (Triticum aestivum L.) is known to be negatively affected by heat stress, and its production is threatened by global warming, particularly in arid regions. Thus, efforts to better understand the molecular responses of wheat to heat stress are required. In the present study, Fourier transform infrared (FTIR) spectroscopy, coupled with chemometrics, was applied to develop a protocol that monitors chemical changes in common wheat under heat stress. Wheat plants at the three-leaf stage were subjected to heat stress at a 42 °C daily maximum temperature for 3 days, and this led to delayed growth in comparison to that of the control. Measurement of FTIR spectra and their principal component analysis showed partially overlapping features between heat-stressed and control leaves. In contrast, supervised machine learning through linear discriminant analysis (LDA) of the spectra demonstrated clear discrimination of heat-stressed leaves from the controls. Analysis of LDA loading suggested that several wavenumbers in the fingerprinting region (400–1800 cm⁻¹) contributed significantly to their discrimination. Novel spectrum-based biomarkers were developed using these discriminative wavenumbers that enabled the successful diagnosis of heat-stressed leaves. Overall, these observations demonstrate the versatility of FTIR-based chemical fingerprints for use in heat-stress profiling in wheat.     

Gamma Secretase Inhibitors as Potential Therapeutic Targets for Notch Signaling in Uterine Leiomyosarcoma

Uterine leiomyosarcoma (uLMS) is a rare and aggressive cancer with few effective therapeutics. The Notch signaling pathway is evolutionarily conserved with oncogenic properties, but it has not been well studied in uLMS. The purpose of our study was to determine expression of Notch family genes and proteins and to investigate the therapeutic effect of γ-secretase inhibitors (GSIs), indirect inhibitors of Notch signaling, in uLMS. We determined expression of Notch genes and proteins in benign uterine smooth muscle tissue, fibroids, and uLMS samples by immunostaining and in two uLMS cell lines, SK-UT-1B (uterine primary) and SK-LMS-1 (vulvar metastasis) by RT-PCR, Western blot and immunostaining. We exposed our cell lines to GSIs, DAPT and MK-0752, and measured expression of HES1, a downstream effector of Notch. Notch proteins were differentially expressed in uLMS. Expression of NOTCH3 and NOTCH4 was higher in uLMS samples than in benign uterine smooth muscle and fibroids. Expression of NOTCH4 was higher in SK-LMS-1 compared to SK-UT-1B. Exposure of SK-UT-1B and SK-LMS-1 to DAPT and MK-0752 decreased expression of HES1 and decreased uLMS cell viability in a dose- and time-dependent manner that was unique to each GSI. Our findings suggest that GSIs are potential therapeutics for uLMS, albeit with limited efficacy.