Characterising variances of milk powder and instrumentation for the development of a non-targeted,Raman spectroscopy and chemometrics detection method for the evaluation of authenticity

There is a need to develop rapid tools to screen milk products for economically motivated adulteration. An understanding of the physiochemical variability within skim milk powder (SMP) and non-fat dry milk (NFDM) is the key to establishing the natural differences of these commodities prior to the development of non-targeted detection methods. This study explored the sources of variance in 71 commercial SMP and NFDM samples using Raman spectroscopy and principal component analysis (PCA) and characterised the largest number of commercial milk powders acquired from a broad number of international manufacturers. Spectral pre-processing using a gap-segment derivative transformation (gap size = 5, segment width = 9, fourth derivative) in combination with sample normalisation was necessary to reduce the fluorescence background of the milk powder samples. PC scores plots revealed no clear trends for various parameters, including day of analysis, powder type, supplier and processing temperatures, while the largest variance was due to irreproducibility in sample positioning. Significant chemical sources of variances were explained by using the spectral features in the PC loadings plots where four samples from the same manufacturer were determined to likely contain an additional component or lactose anomers, and one additional sample was identified as an outlier and likely containing an adulterant or differing quality components. The variance study discussed herein with this large, diverse set of milk powders holds promise for future use as a non-targeted screening method that could be applied to commercial milk powders.     

Correction to Frazier et al. (2011).

Reports an error in "Perceived past, present, and future control and adjustment to stressful life events" by Patricia Frazier, Nora Keenan, Samantha Anders, Sulani Perera, Sandra Shallcross and Samuel Hintz (Journal of Personality and Social Psychology, Vol 100[4], 749-765). There is an error on page 758. In the sentence “Present control predicted later event-specific distress in Sample 1(β = .17, p 2011-02001-001.) Perceived control is a central construct in psychology and is key to understanding individual differences in poststress outcomes (Frazier, Berman, & Steward, 2001). The goals of the current studies (using 4 samples of undergraduate students, total N = 1,421) were to examine the relations between different aspects of perceived control and poststress outcomes and to differentiate perceived control over specific events from related constructs (i.e., general control beliefs, coping strategies). To accomplish these goals, we first developed a new measure of perceived past, present, and future control over stressful life events. The data supported the content validity, factor structure, internal consistency and test–retest reliability, and convergent and discriminant validity of the new measure. Consistent with the temporal model of control (Frazier et al., 2001), these 3 forms of control had very different relations with adjustment. Present control was consistently related to lower distress levels in cross-sectional, longitudinal, and prospective analyses. Present control also predicted outcomes beyond the effects of general control beliefs and coping strategies. Past and future control had nonsignificant or positive relations with distress, although future control was associated with better outcomes (i.e., course grades) when the stressor was controllable. Thus, our measure can be used to assess the relations between perceived past, present, and future control and outcomes across a range of stressors. Because the relations between these 3 forms of control and outcomes differ markedly, measures that combine these aspects of control hinder the understanding of the important role of perceived control in adjustment to stress. (PsycINFO Database Record (c) 2011 APA, all rights reserved)     

Asymmetric Transfer Hydrogenation of Ketones Using New Iron(II) (P-NH-N-P′) Catalysts: Changing the Steric and Electronic Properties at Phosphorus P′

The asymmetric transfer hydrogenation (ATH) of ketones is an efficient method for producing enantio-enriched alcohols which are used as intermediates in a variety of industrial processes. Here we report the synthesis of new iron ATH precatalysts (S,S)-[FeBr(CO)(Ph₂PCH₂CH₂NHCHPhCHPhNC=CHCH₂PR′₂)][BPh₄] (R′=Et, and ortho-tolyl (o-Tol)) where one of the phosphine groups is modified with small alkyl and large aryl substituents to probe the effect of this change on the activity and selectivity of the catalytic system. A simple reversible equilibrium kinetic model is used to obtain the initial TOF and the inherent enantioselectivity S=k_R/k_S of these catalysts along with those for the previously reported catalysts with R′=Ph and Cy for the ATH of acetophenone. With an increase in the size of the PR′₂ group, the TOF goes through a maximum at PPh₂ while the S value goes through a maximum of 510 at R′=Cy. The complex with R′=o-Tol starts with a high S value of 200 but is rapidly changed to a second catalyst with an S value of 28. For the reduction of acetophenone to (R)-1-phenylethanol, turnover numbers of up to 5200 and ee up to 98 % were achieved. The chemotherapeutic pharmaceutical precursor (R)-(3′,5′-bis(trifluoromethyl))-1-phenylethanol is synthesized in up to 95 % ee. Several other alcohols can be prepared in greater than 90 % ee by choosing the precatalyst with the correctly matched steric properties. A hydride complex derived from the catalyst with R′=Cy is characterized by NMR spectroscopy. It is proposed that low concentration trans-hydride carbonyl complexes with the FeH parallel to the NH of the ligand are the active catalysts in all of these systems.     

Changes induced by high hydrostatic pressure in acidified and non-acidified milk during Oaxaca cheese production

Oaxaca cheese, produced using the pasta filata method, is a very popular Mexican dairy products. In this work, the effect of high hydrostatic pressure (HHP) and the acidification process before and after HHP treatment of raw cow milk was studied at different pressure levels (150, 300 and 500 MPa) and holding times (10 and 30 min). Clotting time, proximal composition, microstructure, secondary protein structure and electrophoretic profile were evaluated. HHP did not influence clotting time in samples acidified before HHP, but it appears to have a positive effect at lower pressure treatments on non-acidified milk. Moisture, protein and fat were similar in cheeses treated at most HHP conditions regardless of the acidification. HHP did not influence the microstructure of cheese and the secondary structure of proteins. The use of HHP during the manufacture of Oaxaca cheese allowed preserving quality parameters evaluated without advantages in processing time and the product's proximal composition.     

Biopolymers for Antitumor Implantable Drug Delivery Systems: Recent Advances and Future Outlook

In spite of remarkable improvements in cancer treatments and survivorship, cancer still remains as one of the major causes of death worldwide. Although current standards of care provide encouraging results, they still cause severe systemic toxicity and also fail in preventing recurrence of the disease. In order to address these issues, biomaterial‐based implantable drug delivery systems (DDSs) have emerged as promising therapeutic platforms, which allow local administration of drugs directly to the tumor site. Owing to the unique properties of biopolymers, they have been used in a variety of ways to institute biodegradable implantable DDSs that exert precise spatiotemporal control over the release of therapeutic drug. Here, the most recent advances in biopolymer‐based DDSs for suppressing tumor growth and preventing tumor recurrence are reviewed. Novel emerging biopolymers as well as cutting‐edge polymeric microdevices deployed as implantable antitumor DDSs are discussed. Finally, a review of a new therapeutic modality within the field, which is based on implantable biopolymeric DDSs, is given.     

归去来兮,自然慢生活

正在车水马龙、喧嚣浮躁的当下,我们渴望回归自然,追求一种健康、舒适、简约的生活方式。有一个地方,那里有自然万物的本相——归来兮有机庄园。在南京高淳慢城的浓绿深处,归来兮有机庄园近乎完美地把自己隐藏在了江南丘陵地貌自然形成的轻微褶皱之中,让出现在这里的人,不自觉地卸下现代都市生活的重重伪装,抛下脑后的烦恼与心中的压力,与大自然和谐共生。     

Blood flow through the embryonic heart outflow tract during cardiac looping in HH13–HH18 chicken embryos

Blood flow is inherently linked to embryonic cardiac development, as haemodynamic forces exerted by flow stimulate mechanotransduction mechanisms that modulate cardiac growth and remodelling. This study evaluated blood flow in the embryonic heart outflow tract (OFT) during normal development at each stage between HH13 and HH18 in chicken embryos, in order to characterize changes in haemodynamic conditions during critical cardiac looping transformations. Two-dimensional optical coherence tomography was used to simultaneously acquire both structural and Doppler flow images, in order to extract blood flow velocity and structural information and estimate haemodynamic measures. From HH13 to HH18, peak blood flow rate increased by 2.4-fold and stroke volume increased by 2.1-fold. Wall shear rate (WSR) and lumen diameter data suggest that changes in blood flow during HH13–HH18 may induce a shear-mediated vasodilation response in the OFT. Embryo-specific four-dimensional computational fluid dynamics modelling at HH13 and HH18 complemented experimental observations and indicated heterogeneous WSR distributions over the OFT. Characterizing changes in haemodynamics during cardiac looping will help us better understand the way normal blood flow impacts proper cardiac development.     

Statistical Quantification of the Impact of Surface Preparation on Yield Point Phenomena in Nickel

Nanoindentation was used to evaluate the effect of three surface preparation techniques—mechanical polishing, electropolishing, and ion polishing—on experimental measurements of incipient plasticity in commercially pure Ni 200. Surface preparation techniques are linked to defect densities, estimated with image quality (IQ) and kernel average misorientation (KAM) data obtained from electron backscatter diffraction patterns and the Taylor relation. Minimum yield pressures are insensitive to surface preparation, while mean yield pressure depends on dislocation density, and the maximum yield pressure is likely influenced by defects other than dislocations. KAM coupled with IQ may be a useful non-destructive parameter to relate surface defect density to the resulting changes in the spatial variability of incipient plasticity during a nanoindentation experiment. This analysis makes the assumption that geometrically necessary dislocation density is proportional to total dislocation density; in cases where this condition is not satisfied, the KAM analysis may not be valid.     

Electronic structure of the Zn(O,S)/Cu(In,Ga)Se2 thin‐film solar cell interface

The electronic band alignment of the Zn(O,S)/Cu(In,Ga)Se₂ interface in high‐efficiency thin‐film solar cells was derived using X‐ray photoelectron spectroscopy, ultra‐violet photoelectron spectroscopy, and inverse photoemission spectroscopy. Similar to the CdS/Cu(In,Ga)Se₂ system, we find an essentially flat (small‐spike) conduction band alignment (here: a conduction band offset of (0.09 ± 0.20) eV), allowing for largely unimpeded electron transfer and forming a likely basis for the success of high‐efficiency Zn(O,S)‐based chalcopyrite devices. Furthermore, we find evidence for multiple bonding environments of Zn and O in the Zn(O,S) film, including ZnO, ZnS, Zn(OH)₂, and possibly ZnSe. Copyright © 2016 John Wiley & Sons, Ltd.