Biodegradable and conductive hyperbranched terpolymers based on aliphatic polyester,poly(D,L-lactide), and polyaniline used as scaffold in tissue engineering

Designing the novel conductive and biodegradable scaffolds based on star-like hyperbranched terpolymers of aliphatic polyester–poly(D,L-lactide)–polyaniline (S-HAP–PLA–PANI) was the purpose of this research. The electroactivity of tissue engineering scaffold, which in the current work was for the presence of PANI, is an essential factor in its performance because the electrical signals are the pivotal physiological stimuli that control the adhesion and differentiation of various cell types. Star-shaped polymers have attracted conspicuous attention, thanks to their low-cost, well-defined highly functionalized structures and low crystallinity, and they also could be an interesting alternative to the linear analogs for their interaction with surrounding tissue and faster degradation rate. In the present work, after 12 weeks, the mass loses for S-HAP–PLA–PANI sample were calculated to be 45%. Scaffolds based on S-HAP–PLA–PANI/PLA nanofibers having the average diameter of 70–200?nm and electrical conductivity of 0.05 S cm^?1 imitated the natural microenvironment of extra cellular matrix to regulate the cell attachment, proliferation, and differentiation.     

Polyester condensation adducts as novel photo stabilizers for polystyrene

Polycondensation adducts formed by the reaction of maleic anhydride with some Polyalcohols, namely, phloroglucinol, glycerol, and ethylene glycol, were prepared, characterized, and investigated as photostabilizers for polystyrene. Their Photostabilizing effectiveness was evaluated by measuring the extent of weight loss (%), the amount of gel formed as well as the viscosity average molecular weight of the soluble fractions of the degraded polymer. The results indicated better stabilizing effects of these stabilizers compared with that of the UV absorber, phenyl salicylate. A synergistic effect was achieved when the investigated photostabilizers were mixed with phenyl salicylate in a weight ratio of 1 : 1, and a radical mechanism is proposed to account for the action of the polycondensation adducts as photostabilizers. J. VINYL ADDIT. TECHNOL., 19:293–301, 2013. © 2013 Society of Plastics Engineers     

Poly(vinyl alcohol) membranes in wound-dressing application: microstructure,physical properties,and drug release behavior

Poly(vinyl alcohol) (PVA) hydrogel membranes were prepared through three different preparation methods including freeze-thawing (FT), solution casting (SC) followed by thermal annealing, and phase separation (PS). The prepared hydrogels were characterized by Fourier transform-infrared spectroscopy, X-ray diffractometry, and scanning electron microscopy. Nitrofurazone (NFZ) was then loaded in the hydrogels. FT and SC methods led to obtaining dense membranes, while PS method resulted in an asymmetric one. The effects of hydrogel preparation method on water absorption, gel fraction, water vapor and oxygen permeabilities, bacterial barrier, tensile properties, and drug release profiles were investigated. The water vapor permeability of the hydrogel prepared through PS method was about 1.5 times higher than those obtained through FT and SC methods. Gel formation in PS method is probably responsible for the highest degree of crystallinity, and consequently the maximum gel fraction for the corresponded membrane. The elongation-at-break for this membrane in wet state was 41% higher than that made by FT method and 18% greater than that of SC method. Membranes prepared by all three methods showed excellent barrier property against bacterial penetration during 1 week. The results showed that PS membrane could control the release of NFZ more effectively as compared with the other two samples.     

A sight on the current nanoparticle-based gene delivery vectors

Nowadays, gene delivery for therapeutic objects is considered one of the most promising strategies to cure both the genetic and acquired diseases of human. The design of efficient gene delivery vectors possessing the high transfection efficiencies and low cytotoxicity is considered the major challenge for delivering a target gene to specific tissues or cells. On this base, the investigations on non-viral gene vectors with the ability to overcome physiological barriers are increasing. Among the non-viral vectors, nanoparticles showed remarkable properties regarding gene delivery such as the ability to target the specific tissue or cells, protect target gene against nuclease degradation, improve DNA stability, and increase the transformation efficiency or safety. This review attempts to represent a current nanoparticle based on its lipid, polymer, hybrid, and inorganic properties. Among them, hybrids, as efficient vectors, are utilized in gene delivery in terms of materials (synthetic or natural), design, and in vitro/in vivo transformation efficiency.     

Effect of fuel type on structural and physicochemical properties of solution combustion synthesized CoCr2O4 ceramic pigment nanoparticles

Due to importance and wide applications, CoCr₂O₄ ceramic pigment nanoparticles were synthesized via low-temperature solution combustion route by different fuels including ethylenediamine/oxalic acid, ethylenediamine/citric acid, oxalic acid/citric acid and ethylenediamine/oxalic acid/citric acid. Physicochemical properties of the synthesized samples were determined by different techniques such as fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), field emission scanning electron microscopy (FE-SEM) and energy dispersive X-ray spectroscopy (EDX) and color/optical properties were evaluated based on CIELAB system by spectrophotometer. Moreover, thermodynamic considerations of combustion reactions for CoCr₂O₄ nanopigments formation in terms of calculated adiabatic flame temperature and enthalpy of combustion reaction were studied. The Comparison of results and data showed that cobalt chromite pigment nanoparticles synthesized by using ethylenediamine/citric acid and ethylenediamine/oxalic acid/citric acid fuels exhibited higher purity, smaller crystallite size and lower degree agglomeration.     

Mechanical,morphological, and thermal properties of poly(vinyl chloride)/low‐density polyethylene composites filled with date palm leaf fiber

This article investigates the mechanical, morphological, and thermal properties of poly(vinyl chloride) (PVC) and low‐density polyethylene (LDPE) blends, at three different concentrations: 20, 50, and 80 wt% of LDPE. Besides, composite samples that were prepared from PVC/LDPE blend reinforced with different date palm leaf fiber (DPLF) content, 10, 20, and 30 wt%, were also studied. The sample in which PVC/LDPE (20 wt%/80 wt%) had the greatest tensile strength, elongation at break, and modulus. The good thermal stability of this sample can be seen that T_10% and T_20% occurred at higher temperatures compared to others blends. DPLF slightly improved the tensile strength of the polymer blend matrix at 10 wt% (C10). The modulus of the composites increased significantly with increasing filler content. Ageing conditions at 80°C for 168 h slightly improved the mechanical properties of composites. Scanning electron microscopic micrographs showed that morphological properties of tensile fracture surface are in accordance with the tensile properties of these blends and composites. Thermogravimetric analysis and derivative thermogravimetry show that the thermal degradation of PVC/LDPE (20 wt%/80 wt%) blend and PVC/LDPE/DPLF (10 and 30 wt%) composites took place in two steps: in the first step, the blend was more stable than the composites. In the second step, the composites showed a slightly better stability than the PVC/LDPE (20 wt%/80 wt%) blend. Based on the above investigation, these new green composites (PVC/LDPE/DPLF) can be used in several applications. J. VINYL ADDIT. TECHNOL., 25:E88–E93, 2019. © 2018 Society of Plastics Engineers     

Pure and complex nanostructures using poly[bis(triiso‐propylsilylethynyl) benzodithiophene‐bis(decyltetradecyl‐thien) naphthobisthiadiazole], carbon nanotubes and reduced graphene oxide for high‐performance polymer solar cells

Crystallization of poly[bis(triiso‐propylsilylethynyl) benzodithiophene‐bis(decyltetradecyl‐thien) naphthobisthiadiazole] (PBDT‐TIPS‐DTNT‐DT) was investigated in supramolecules based on carbon nanotubes (CNTs) and reduced graphene oxide (rGO) and their grafted derivatives. The principal peaks of PBDT‐TIPS‐DTNT‐DT crystals were in the range 3.50°–3.75°. By grafting the surface of the carbonic materials, the assembling of polymer chains decreased because of hindrance of poly(3‐dodecylthiophene) (PDDT) grafts against π‐stacking. The diameters of CNT/polymer and CNT‐g‐PDDT/polymer supramolecules were 160 and 100 nm. The rGO/polymer supramolecules had the highest melting point (T_m = 282 °C) and fusion enthalpy (ΔH_m = 25.98 J g^?1), reflecting the largest crystallites and the most ordered constituents. Nano‐hybrids based on grafted rGO (276 °C and 28.26 J g^?1), CNT (275 °C and 27.32 J g^?1) and grafted CNT (268 °C and 22.17 J g^?1) were also analyzed. T_m and ΔH_m values were significantly less in corresponding melt‐grown systems. The nanostructures were incorporated in active layers of PBDT‐TIPS‐DTNT‐DT:phenyl‐C₇₁‐butyric acid methyl ester (PC₇₁BM) solar cells to improve the photovoltaic features. The best results were detected for PBDT‐TIPS‐DTNT‐DT:PC₇₁BM:rGO/polymer systems having J_sc = 13.11 mA cm^?2, fill factor 60% and V_oc = 0.71 V with an efficacy of 5.58%. On grafting the rGO and CNT, efficiency reductions were 12.01% (5.58%–4.91%) and 9.34% (4.07%–3.69%), respectively. © 2019 Society of Chemical Industry     

Efficiency above 6% in poly(3‐hexylthiophene):phenyl‐C‐butyric acid methyl ester photovoltaics via simultaneous addition of poly(3‐hexylthiophene) based grafted graphene nanosheets and hydrophobic block copolymers

A combination of reduced graphene oxide (rGO) nanosheets grafted with regioregular poly(3‐hexylthiophene) (P3HT) (rGO‐g‐P3HT) and P3HT‐b‐polystyrene (PS) block copolymers was utilized to modify the morphology of P3HT:[6,6]‐phenyl‐C71‐butyric acid methyl ester (PC71BM) active layers in photovoltaic devices. Efficiencies greater than 6% were acquired after a mild thermal annealing. To this end, the assembling of P3HT homopolymers and P3HT‐b‐PS block copolymers onto rGO‐g‐P3HT nanosheets was investigated, showing that the copolymers were assembled from the P3HT side onto the rGO‐g‐P3HT nanosheets. Assembling of P3HT‐b‐PS block copolymers onto the rGO‐g‐P3HT nanosheets developed the net hole and electron highways for charge transport, thereby in addition to photoluminescence quenching the charge mobility (μ_h and μ_e) values increased considerably. The best charge mobilities were acquired for the P3HT₅₀₀₀₀:PC71BM:rGO‐g‐P3HT₅₀₀₀₀:P3HT₇₀₀₀‐b‐PS₁₀₀₀ system (μ_h = 1.9 × 10^?5 cm² V^–1 s^–1 and μ_e = 0.8 × 10^?4 cm² V^–1 s^–1). Thermal annealing conducted at 120 °C also further increased the hole and electron mobilities to 9.8 × 10^?4 and 2.7 × 10^?3 cm² V^–1 s^–1, respectively. The thermal annealing acted as a driving force for better assembly of the P3HT‐b‐PS copolymers onto the rGO‐g‐P3HT nanosheets. This phenomenon improved the short circuit current density, fill factor, open circuit voltage and power conversion efficiency parameters from 11.13 mA cm^?2, 0.63 V, 62% and 4.35% to 12.98 mA cm^?2, 0.69 V, 68% and 6.09%, respectively. © 2019 Society of Chemical Industry     

Hydrolytic degradation of poly(l‐lactic acid)/poly(methyl methacrylate) blends

The hydrolytic degradation of poly(l ‐lactic acid)/poly(methyl methacrylate) (PLLA/PMMA) blends was carried out by the immersion of thin films in buffer solutions (pH = 7.24) in a shaking water bath at 60 °C for 38 days. The PLA/PMMA blends (0/100; 30/70; 50/50; 70/30; 100/0) were obtained by melt blending using a Brabender internal mixer and shaped into thin films of about 150 µm in thickness. Considering that PMMA does not undergo hydrolytic degradation, that of PLLA was followed via evolution of PLA molecular weight (recorded by size exclusion chromatography), thermal parameters (differential scanning calorimetry (DSC)) and morphology of the films (scanning transmission electron microscopy). The results reveal a completely different degradation pathway of the blends depending on the polymethacrylate/polyester weight ratio. DSC data suggest that, during hydrolysis at higher PMMA content, the polyester amorphous chains, more sensitive to water, are degraded before being able to crystallize, while at higher PLLA content, the crystallization is favoured leading to a sample more resistant to hydrolysis. In other words, and quite unexpectedly, increasing the content of water‐sensitive PLLA in the PLLA/PMMA blends does not mean de facto faster hydrolytic degradation of the resulting materials. © 2018 Society of Chemical Industry