Elementary models for biological interaction

This paper provides a brief review of two theories of biological interaction of hazardous exposures, the Hewlett-Plackett theory and the sufficient-component cause theory. Although the former has its origin in bioassay and the latter in epidemiology, it is possible to show that the two theories are isomorphic in that they imply identical relationships between biological interaction and disease rates. The relationship of biological interaction to statistical and public health interaction is also reviewed. In particular, the presence or absence of biological interaction under the two theories does not correspond in a one-to-one fashion with the presence or absence of any proposed form of statistical or public health interaction. This observation confirms the importance of clearly distinguishing different concepts of interaction.     

Applications of specialized coils for high-resolution MRI on a whole-body scanner

To investigate the application of a mini-coil surface system for high-resolution MRI, 60 volunteers were examined in a 1.5-T whole-body scanner. Two replaceable probe heads were available: a circular 2.5-cm coil and a quadratic 5-cm coil, both of which were placed directly on the skin. The skin layers, Achilles tendon and finger joints were examined with the 2.5-cm coil and a FOV of 25 × 25 mm². A matrix of 256 × 256 pixels resulted in a pixel size of 0.098 × 0.098 mm². For imaging of the carpal tunnel, the 5-cm coil was used in transverse orientation. The FOV was 50 × 50 mm² so that a matrix of 256 × 256 pixels led to a pixel size of 0.195 × 0.195 mm². The resulting spatial resolution permitted visualization of the epidermis, dermis and subcutis, resulting in clear definition of anatomical detail of the musculoskeletal system. MRI measurement of skin-layer thickness did not correlate with histometric data (p<0.05). This discrepancy was due in part to shrinkage of the tumor specimen on histologic preparation. Other causes include the motion artifacts and the limited accuracy of determining thickness on the MRI display unit.     

Severity of perinatal cerebral injury and developmental outcome: A dose-response relationship.

The purpose of this study was to establish a dose–response relationship between extent of perinatal cerebral injury and quality of developmental outcome in childhood. To attain this goal, 54 school and preschool-age children who had incurred perinatal intracranial hemorrhage were recruited. The main index of hemorrhage severity—the degree of acute ventriculomegaly observed on the cranial ultrasonogram during the neonatal period—was significantly associated with outcome in all measured domains. These included verbal and nonverbal intelligence, motor skills, and behavioral problems associated with the externalizing and internalizing syndromal groupings. The putative neurobiological mechanisms underlying the observed dose–response relationship between perinatal lesion severity and developmental outcome are discussed. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Dumbbells,Trikes and Quads: Organic–Inorganic Hybrid Nanoarchitectures Based on “Clicked” Gold Nanoparticles

The controlled assembly of gold nanoparticles in terms of the spatial arrangement and number of particles is essential for many future applications like electronic devices, sensors and labeling. Here an approach is presented to build up oligomers of mono functionalized gold nanoparticles by the use of 1,3‐bipolar azide alkyne cycloaddition click chemistry. The gold nanoparticles of 1.3 nm diameter are stabilized by one dendritic thioether ligand comprising an alkyne function. Together with di‐, tri‐ and tetra‐azide linker molecules the gold nanoparticle can be covalently coupled by a wet chemical protocol. The reaction is tracked with IR and UV–vis spectroscopy and the yielded organic‐inorganic hybrid structures are analyzed by transmission electron microscopy. To evaluate the success of this click chemistry reaction statistical analysis of the formed oligomers is performed. The geometric and spatial arrangements of the found oligomers match perfectly the calculated values for the used linker molecules. Dimers, trimers and tetramers could be identified after the reaction with the corresponding linker molecule. The results of this model reaction suggest that the used click chemistry protocol is working well with mono functionalized gold nanoparticles.     

Electrochemical analysis of proton and electron transfer equilibria of the reducible moieties in humic acids

Humic substances play a key role in biogeochemical and pollutant redox reactions. The objective of this work was to characterize the proton and electron transfer equilibria of the reducible moieties in different humic acids (HA). Cyclic voltammetry experiments demonstrated that diquat and ethylviologen mediated electron transfer between carbon working electrodes and HA. These compounds were used also to facilitate attainment of redox equilibria between redox electrodes and HA in potentiometric E(h) measurements. Bulk electrolysis of HA combined with pH-stat acid titration demonstrated that electron transfer to the reducible moieties in HA also resulted in proton uptake, suggesting decreasing reduction potentials E(h) of HA with increasing pH. This was confirmed by potentiometric E(h)-pH titrations of HA at different redox states. E(h) measurements of HA samples prereduced to different redox states by bulk electrolysis revealed reducible moieties in HA that cover a wide range of apparent standard reduction potentials at pH 7 from E(h)(0)* = +0.15 to -0.3 V. Modeling revealed an overall increase in the relative abundance of reducible moieties with decreasing E(h). The wide range of HA is consistent with its involvement in numerous environmental electron transfer reactions under various redox conditions.     

Literature review of pedestrian fatality risk as a function of car impact speed

The aim of this review was to evaluate all studies of pedestrian fatality risk as a function of car impact speed. Relevant papers were primarily investigated with respect to data sampling procedures and methods for statistical analysis. It was uniformly reported that fatality risk increased monotonically with car impact speed. However, the absolute risk estimates varied considerably. Without exceptions, papers written before 2000 were based on direct analyses of data that had a large bias towards severe and fatal injuries. The consequence was to overestimate the fatality risks. We also found more recent research based on less biased data or adjusted for bias. While still showing a steep increase of risk with impact speed, these later papers provided substantially lower risk estimates than had been previously reported.     

Isotope dilution liquid chromatography - mass spectrometry methods for fat- and water-soluble vitamins in nutritional formulations

Vitamins are essential to human health, and dietary supplements containing vitamins are widely used by individuals hoping to ensure they have adequate intake of these important nutrients. Measurement of vitamins in nutritional formulations is necessary to monitor regulatory compliance and in studies examining the nutrient intake of specific populations. Liquid chromatographic methods, primarily with UV absorbance detection, are well established for both fat- and water-soluble measurements, but they do have limitations for certain analytes and may suffer from a lack of specificity in complex matrices. Liquid chromatography-mass spectrometry (LC-MS) provides both sensitivity and specificity for the determination of vitamins in these matrices, and simultaneous analysis of multiple vitamins in a single analysis is often possible. In this work, LC-MS methods were developed for both fat- and water-soluble vitamins and applied to the measurement of these analytes in two NIST Standard Reference Materials. When possible, stable isotope labeled internal standards were employed for quantification.     

High and very high temperature reactor research for multipurpose energy applications

Ten years ago, the European High Temperature Reactor (HTR) Technology Network (HTR-TN) launched a programme for developing HTR Technology, which expanded so far through 4 successive Euratom Framework Programmes. Many projects have been performed - in particular the RAPHAEL project in the 6th Euratom Framework Programme and presently ARCHER in the 7th - in line with the Network strategy that identified cogeneration of process heat and power as the main specific mission of HTR. HTR can indeed address the growing energy needs of industry presently fully relying on fossil fuel combustion with a CO₂-lean generation technology, thanks to its high operating temperature and to its unique flexibility obtained from its large thermal inertia and its low power.Relying on the legacy of the former European leadership in HTR technology, this programme has addressed specific developments required for industrial process heat applications and for increasing HTR performances (higher temperatures and fuel burn-up). Decisive achievements have been obtained concerning fuel manufacturing and irradiation behaviour, key components and their materials, safety, computer code validation and specific HTR waste (fuel and graphite) management. Key experiments have been performed or are still ongoing: irradiation of graphite, fuel and vessel materials and the corresponding post-irradiation examinations, safety tests and isotopic analyses; thermal-hydraulic tests of an Intermediate Heat Exchanger mock-up in helium; air ingress experiments for a block type core, etc. Through Euratom participation in the Generation IV International Forum (GIF), these achievements contribute to international cooperation.HTR-TN strategy has been recently integrated by the “Sustainable Nuclear Energy Technology Platform” (SNE-TP) as one of the 3 “pillars” of its global nuclear strategy. It is also in line with the orientations and the timing of the “Strategic Energy Technology Plan (SET-Plan)” for the development of CO₂-lean energy technologies, and thus strengthens the nuclear option in a future European energy mix.Nuclear cogeneration for industrial process heat applications is a major innovation and a major challenge, requiring large-scale demonstration to prove its industrial viability. To enable demonstration, it is necessary not only to develop an appropriate nuclear heat source, but also to develop coupling technologies and to adapt industrial processes to the coupling with a HTR. This requires a close partnership between the conventional and the nuclear technology holders as the base of a Nuclear Cogeneration Industrial Initiative.Recently the project EUROPAIRS initiated by HTR-TN together with process heat user industries has set the bases of such a strategic partnership.