Thermal evaluation of the use of porous ceramic plates on ventilated façades—part II: Thermal behavior

The effects of porous ceramic plates on the thermal behavior of ventilated façades were evaluated, and the results are presented herein. Thermal behavior in a ventilated façade of specimens containing 40 wt% of lime mud and a firing temperature of 1100°C was evaluated and compared with a commercial porcelain ceramic tile, which was the reference material. An experimental apparatus was designed to evaluate the thermal performance of the studied ventilated façades. The results revealed that the ventilated façade composed of the studied porous ceramic tiles produced a greater reduction in temperature between the external environmental and the interior of a box representing a building (ΔT5) of 65.7°C, compared with the façade composed of the commercial porcelain ceramic tiles (ΔT5 = 56.0°C) and even the traditional façade (ΔT5 = 49.1°C). Thus, porous ceramic tiles based on byproducts are promising candidates for ventilated façade systems.     

Consequences of different cutting regimes on regrowth and nutrient stoichiometry of Sparganium erectum L. and Potamogeton natans L.

Aquatic vegetation forms an essential component in freshwater ecosystems but due to changed environmental and anthropogenic conditions often needs management to reduce nuisance for human land‐use. In this paper, the authors looked at the regrowth of two macrophyte species (Potamogeton natans and Sparganium erectum) in two lowland rivers under different cutting treatments. After an initial cross‐sectional transect was manually removed from bank to bank at the beginning of the growth season, a monthly repetitive removal of biomass in plots on that transect was done during the rest of the growth season (testing frequency of mowing). Additional new transects were also cut in subsequent months (testing timing of mowing). Finally, biomass was repetitively removed in plots in those additional transects too (testing frequency of mowing × timing of mowing). The biomass at the end of the growth season was analysed for C, N, P, and Si. It was demonstrated that timing and frequency of vegetation cutting has an important effect on the capacity and rate of species' recovery and therefore on the efficiency of the applied management. Nutrient stoichiometry of the regrown biomass was directly affected by cutting. Caused by differences in the applied timing and frequency of the cutting, C/N and N/P ratios and BSi concentrations were highly variable. Yet, overall, there was a clear tendency towards a higher C/N ratio and BSi concentration and lower N/P ratio in biomass that recovered after cutting. This human impact on the quantity and quality of autochthonous organic matter may have knock‐on effects on the decomposers food web and mineralization process.     

Assessment of the environmental quality of two urbanized lotic systems using multiple indicators

Urbanization impacts ecosystems through loss and fragmentation of habitat, loss of diversity, increase in runoff, and contaminant discharges, and the invasion of exotic species. Potrero de los Funes Village (San Luis, Argentina) is experiencing not only a population increase during summer months due to tourism but also an accelerated growth of its permanent population. In order to evaluate the potential effects of urbanization, the environmental quality of Potrero de los Funes River and Las Chacras Stream was assessed, using physical–chemical and biological indicators. Macroinvertebrates, through the application of the Biotic Index for San Luis Sierras (BISLS), anuran amphibian richness and relative abundance, and riparian vegetation were used as bioindicators. While the Simplified Index of Water Quality (SIWQ) was used to characterize the physical–chemical quality of water at each site. SIWQ and BISLS scores were significantly different between sites (F_7,28 = 9.88, p < .001 and F_7,28 = 24.18, p < .001, respectively). SIWQ was significantly correlated with BISLS (Spearman correlation coefficient = 0.8, p < .001). Four anuran species were registered along Potrero River, with no significant differences in the intensity of vocalizations between sites. No species were detected in Las Chacras Stream. Average total plant species richness, exotic plants richness, and vegetation cover were higher at the most impaired system, Las Chacras Stream. The principal component analysis showed that the first two principal components (PCs) explained 76.3% of the total variance. PC1, with strong loadings of SIWQ, BISLS, and amphibian richness, was principally driven by chemical water quality and biological conditions. PC2 was mainly determined by plant richness. The chemical and biological water quality of Potrero and Las Chacras is somewhat impaired, being the upper Las Chacras Stream the most compromised area. This study provides information that will certainly be used to manage future impacts of urbanization on aquatic resources.     

A 2D algorithm with asymmetric workload for the UPC conjugate gradient method

This paper examines four different strategies, each one with its own data distribution, for implementing the parallel conjugate gradient (CG) method and how they impact communication and overall performance. Firstly, typical 1D and 2D distributions of the matrix involved in CG computations are considered. Then, a new 2D version of the CG method with asymmetric workload, based on leaving some threads idle during part of the computation to reduce communication, is proposed. The four strategies are independent of sparse storage schemes and are implemented using Unified Parallel C (UPC), a Partitioned Global Address Space (PGAS) language. The strategies are evaluated on two different platforms through a set of matrices that exhibit distinct sparse patterns, demonstrating that our asymmetric proposal outperforms the others except for one matrix on one platform.     

Pervaporation of 50 wt % ethanol–water mixtures with poly(1‐trimethylsilyl‐1‐propyne) membranes at high temperatures

Poly(1‐trimethylsilyl‐1‐propyne) (PTMSP) membranes have been used to separate ethanol–water mixtures by pervaporation. This polyacetylene is known to present high affinity toward ethanol, showing high selectivity and ethanol permeation flux. The performance of this polymer in the separation of alcohol–water solutions has been evaluated over long periods (572 h) at a high temperature (75°C) to examine the deterioration of the transport properties in the separation of 50 wt % ethanol–water solutions. Although PTMSP membranes present good characteristics for the separation of gases and liquid mixtures, their organic selectivity decrease with the operating time because of the relaxation processes of the polymeric chains, which affect the free volume of the polymer, the deterioration being more evident for concentrated solutions. The effects of the operation temperature on the characteristic parameters of pervaporation have also been studied to establish how this variable affects the performance of PTMSP membranes. The selectivity increases slightly with the operation temperature, but the effect of the temperature on the separation factor decreases as membranes are degraded with the operation time. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 2843–2848, 2007     

Chattering-Free Sliding Mode Altitude Control for a Quad-Rotor Aircraft: Real-Time Application

Nowadays, the chattering problem in sliding mode control is one of the most important points to consider in real-time applications. To address this problem, a real-time robust altitude control scheme is proposed for the efficient performance of a Quad-rotor aircraft system using a continuous sliding mode control. The sensing of altitude measurement sensing is performed by a pressure sensor in order to obtain a robust altitude control of the vehicle in hovering mode both indoor and outdoor. The altitude measurement has the advantage of introducing this state information directly in the closed loop control which should be very useful for achieving robust stabilization of the altitude control. Accordingly, we propose a sliding mode control strategy without chattering. The sliding mode control proposed removes the chattering phenomenon by replacing a sign function with a high-slope saturation function. The control algorithm is derived from the Lyapunov stability theorem. Moreover, we have assumed that the actuators are able to respond quickly and accurately and we have not enforced limits on the control signals for a real-time application. Finally, to verify the satisfactory performance of proposed nonlinear control law, several simulations and experimental results of the Chattering-free sliding mode control for the Quad-rotor aircraft in the presence of bounded disturbances are presented.     

Silphinene Sesquiterpenes as Model Insect Antifeedants

Silphinene sesquiterpenes are established chrysomelid antifeedants. In this work, nine silphinene analogs, 11-acetoxy-5-angeloyloxysilphinen-3-one (1), 11-acetoxy-5-tigloyloxysilphinen-3-one (2), 11-acetoxy-5-iso- butyryloxysilphinen-3-one (3), 11-hydroxy-5-angeloyloxysilphinen-3-one (4), 11,5-dihydroxysilphinen-3-one (5), 11,5-diacetoxysilphinen-3-one (6), 5,11-diisobutyryloxysilphinen-3-one (7), silphinen-3,5,11-trione (8), and O-methyl-5-epicantabrenolic acid methyl ester (10), and a presilphiperfolane sesquiterpene (9) were tested against several divergent insect species, including the lepidopteran Spodoptera littoralis, the chrysomelid Leptinotarsa decemlineata, and five aphid species, and their antifeedant effects were compared with those of picrotoxinin, a GABA-antagonist, and thymol, an allosteric modulator for insect GABA receptors. All insects tested responded to at least one silphinene analog and/or GABA antagonist. Compound 3 and thymol were effective antifeedants against all species tested except S. littoralis, with varying potencies according to their feeding ecologies. The toxicity of these compounds was species-dependent and did not correlate with their antifeedant effect.     

Eicosapentaenoic acid (20∶5n-3) from the marine microalgaPhaeodactylum tricornutum

Eicosapentaenoic acid (EPA, 20∶5n-3) was obtained from the marine microalgaePhaeodactylum tricornutum by a three-step process: fatty acid extraction by direct saponification of biomass, polyunsaturated fatty acid (PUFA) concentration by formation of urea inclusion compounds, and EPA isolation by semipreparative high-performance liquid chromatography (HPLC). Alternatively, EPA was obtained by a similar two-step process without the PUFA concentration step by the urea method. Direct saponification of biomass was carried out with two solvents that contained KOH for lipid saponification. An increase in yield was obtained because the problems associated with emulsion formation were avoided by separating the biomass from the soap solution before adding hexane for extraction of insaponifiables. The most efficient solvent, ethanol (96%) at 60°C for 1 h, extracted 98.3% of EPA. PUFA were concentrated by the urea method with a urea/fatty acid ratio of 4∶1 at a crystallization temperature of 28°C and by using methanol and ethanol as urea solvents. An EPA concentration ratio of 1.73 (55.2∶31.9) and a recover yield of 78.6% were obtained with methanol as the urea solvent. This PUFA concentrate was used to obtain 93.4% pure EPA by semipreparative HPLC with a reverse-phase, C₁₈, 10 mm i.d.×25-cm column and methanol/water (1% acetic acid), 80∶20 w/w, as the mobile phase. Eighty-five percent of EPA loaded was recovered, and 65.7% of EPA present inP. tricornutum biomass was recovered in highly pure form by this three-step downstream process. Alternatively, 93.6% pure EPA was isolated from the fatty acid extract (without the PUFA concentration step) with 100% EPA recovery yield. This two-step process increases the overall EPA yield to 98.3%, but it is only possible to obtain 20% as much EPA as that obtained by three-step downstream processing.     

Electrochemistry at capped platinum nanoparticle Langmuir Blodgett films: A study of the influence of platinum amount and of number of LB layers

Platinum nanoparticles (n-Pt), over-grafted with 2-thiophenecarbonyl chloride are assembled on gold electrodes, by the Langmuir Blodgett (LB) technique using behenic acid (BHA) as promoting agent. These layers are electrochemically active without any preliminary activation. The [Fe(CN)₆]^3−/4− redox couple was used as electrochemical probe. This paper reports on the influence of the number of deposited LB layers, and the n-Pt density on the electrochemical response. n-Pt density was modified by the change of the “BHA/n-Pt” ratio. Cyclic voltammograms of “[Fe(CN)₆]^3−/4−” were observed whatever the coating conditions. As soon as the first layer was deposited the electrochemical response was associated to the n-Pt coverage, its response slightly increased up to a steady state for five or seven layers. As expected, the increase of the Pt density favored the increase of the current density. XPS analysis performed before and after electrochemical cycling showed that 4-mercaptoaniline capped platinum nanoparticles, and their over grafting were chemically and electrochemically stable. Analysis of influence of the number or the n-Pt density of the layers showed that the electrochemically active part of LB electrodes was provided by the last layer plus a part of the underlying one.