Dendritic Cells and Cancer Immunotherapy: The Adjuvant Effect

Dendritic cells (DCs) are immune specialized cells playing a critical role in promoting immune response against antigens, and may represent important targets for therapeutic interventions in cancer. DCs can be stimulated ex vivo with pro-inflammatory molecules and loaded with tumor-specific antigen(s). Protocols describing the specific details of DCs vaccination manufacturing vary widely, but regardless of the employed protocol, the DCs vaccination safety and its ability to induce antitumor responses is clearly established. Many years of studies have focused on the ability of DCs to provide overall survival benefits at least for a selection of cancer patients. Lessons learned from early trials lead to the hypothesis that, to improve the efficacy of DCs-based immunotherapy, this should be combined with other treatments. Thus, the vaccine’s ultimate role may lie in the combinatorial approaches of DCs-based immunotherapy with chemotherapy and radiotherapy, more than in monotherapy. In this review, we address some key questions regarding the integration of DCs vaccination with multimodality therapy approaches for cancer treatment paradigms.     

Assessing the use of cutinase reversed micellar catalytic system for the production of biodiesel from triglycerides

BACKGROUND: This work evaluates the use of a reversed micellar catalytic system containing a lipolytic biocatalyst, cutinase, to promote the reaction of triglycerides with methanol, ethanol or butanol for the production of biodiesel in isooctane. RESULTS: The specific activity of cutinase increased with increase of the alcohol chain length, and methanol showed a significant toxicity toward the enzyme leading to a specific activity decrease for high concentrations of this alcohol, which did not occur when ethanol or butanol were used. The composition of the mixture was analyzed and it was shown that, although the reaction could proceed without water, the presence of water allowed higher reaction rates and higher conversions, probably because water helps to maintain both the micellar structure and lipase conformation. Excess water, however, had a deleterious effect on conversion. CONCLUSION: The influence of water and methanol, apart from micelle structure, was found to be linked to partition effects of diglyceride and monoglyceride, which may also have a significant impact on the reaction rate. Copyright © 2010 Society of Chemical Industry     

Complex structural contribution of the morphotropic phase boundary in Na0.5Bi0.5TiO3 - CaTiO3 system

The correlation between structure and dielectric properties of lead-free (1-x)Na_0.5Bi_0.5TiO₃ - xCaTiO₃ ((1-x)NBT - xCT) polycrystalline ceramics was investigated systematically by X-ray diffraction, combined with impedance spectroscopy for dielectric characterizations. The system shows high miscibility in the entire composition range. A morphotropic phase boundary (MPB), at 0.09?≤?x?<?0.15 was identified where rhombohedral and orthorhombic symmetries coexist at room temperature. The fraction of orthorhombic phase increases gradually with x in the MPB region. Dielectric measurements reveal that the relative permittivity increase with addition of Ca²⁺. This behavior is unusual with this kind of doping. A thermal hysteresis occurred only in the MPB composition which varies in a non-monotonically manner with x, detected by dielectric properties. This phenomenon is related to the crystalline microstructure by a linear relationship between the fraction of each phase and dielectric properties, and, more precisely, to the strong interaction between rhombohedral and orthorhombic phases.     

Reactive Compatibilizer Precursors for LDPE/PA6 Blends, 4

Summary: The effectiveness of some thermoplastic elastomers grafted with maleic anhydride (MA) or with glycidyl methacrylate (GMA) as compatibilizer precursors (CPs) for blends of low density polyethylene (LDPE) with polyamide‐6 (PA) has been studied. The CPs were produced by grafting different amounts of MA or GMA onto a styrene‐block‐(ethylene‐co‐1‐butene)‐block‐styrene copolymer (SEBS) (KRATON G 1652), either in the melt or in solution. A commercially available SEBS‐g‐MA copolymer with 1.7 wt.‐% MA (KRATON FG 1901X) was also used. The effect of the MA concentration and of other characteristics of the SEBS‐g‐MA CPs was also studied. The specific interactions between the CPs and the blends components were investigated through characterizations of the binary LDPE/CP and PA/CP blends, in the whole composition range. It was demonstrated that the SEBS‐g‐GMA copolymers display poor compatibilizing effectiveness due to cross‐linking resulting from reactions of the epoxy rings of these CPs with both the amine and the carboxyl end groups of PA. On the contrary, the compatibilizing efficiency of the MA‐grafted elastomers, as revealed by the thermal properties and the morphology of the compatibilized blends, was shown to be excellent. The results of this study confirm that the anhydride functional groups possess considerably higher efficiency, for the reactive compatibilization of LDPE/PA blends, than those of the ethylene‐acrylic acid and ethylene‐glycidyl methacrylate copolymers investigated in previous works.

SEM micrograph of the 75/25 LD08/PA blend (with 2 phr SEBSMA1).     

Effect of fatigue loading on wicking properties of polyamide 66 nanofiber yarns

The wicking phenomenon is of prime importance with regards to biomedical applications of nanofiber yarns such as suture yarns and tissue scaffolds. In such applications, the yarns are usually subjected to cyclic tensile forces and biological tensile stresses. There is a lack of science behind the effect of fatigue on wicking properties of nanofiber yarns and this work aims at exploring this venue. Wicking properties of polyamide 66 nanofiber yarns are investigated by tracing the color change in the yarn structure resulting from pH changes during the capillary rise of distilled water. Results show that applying cyclic loading increases equilibrium wicking height in the Lucus–Washburn equation, which is attributed to changes in the overall pore structure in the cyclic loaded yarn. The likely causes of these changes are studied by scanning electron microscope, which reveals disentangled, more or less aligned and parallel nanofibers with a smaller radius in the nanofibrous structure. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47206.     

Quantitative Assessment of Affinity Selection Performance by Using DNA-Encoded Chemical Libraries

DNA-encoded chemical libraries are often used for the discovery of ligands against protein targets of interest. These large collections of DNA-barcoded chemical compounds are typically screened by using affinity capture methodologies followed by PCR amplification and DNA sequencing procedures. However, the performance of individual steps in the selection procedures has been scarcely investigated, so far. Herein, the quantitative analysis of selection experiments, by using three ligands with different affinity to carbonic anhydrase IX as model compounds, is described. In the first set of experiments, quantitative PCR (qPCR) procedures are used to evaluate the recovery and selectivity for affinity capture procedures performed on different solid-phase supports, which are commonly used for library screening. In the second step, both qPCR and analysis of DNA sequencing results are used to assess the recovery and selectivity of individual carbonic anhydrase IX ligands in a library, containing 360 000 compounds. Collectively, this study reveals that selection procedures can be efficient for ligands with sub-micromolar dissociation constants to the target protein of interest, but also that selection performance dramatically drops if 10⁴ copies per library member are used as the input.     

Separation of Trimethyl Borate from a Liquid Mixture by Pervaporation

Four commercial polyvinyl alcohol (PVA) and polydimethylsiloxane (PDMS) membranes were applied to the pervaporation of an azeotropic mixture containing trimethyl borate, a precursor to boronic acids used in Suzuki couplings and a gaseous anti‐oxidant in solder flux or brazing. The degree of cross‐linking of the chains in the active layer played a crucial role in the membrane process using the membranes PERVAP 4155‐80, PERVAP 4155‐40 and PERVAP 4155‐30. PERVAP 4155‐30 reached the best results from all tested membranes; an impressive selectivity with fast permeation was also achieved with the PERVAP 4060 membrane. Methanol preferentially passed through PERVAP 4155‐30, but trimethyl borate was favorably pervaporated from the mixture by PERVAP 6040, due to the diverse affinities of the membranes.     

Novel Self‐Reinforced Films Based on Poly (3‐Hydroxybutyrate‐Co‐3‐Hydroxyvalerate) (PHBV) and PHBV Microparticles

Biodegradable self‐reinforced films of poly (3‐hydroxybutyrate‐co‐3‐hydroxyvalerate) (PHBV) and PHBV microparticles were prepared through the solvent casting method (srPHBV). Differential scanning calorimetry (DSC), wide angle X‐ray scattering (WAXS) and polarized optical microscopy results confirmed the nucleating effect of PHBV microparticles. WAXS proved that diffractograms of PHBV and srPHBV‐6 films at room temperature contain the main characteristic diffraction peaks of an orthorhombic α‐type crystalline structure. Small angle X‐ray scattering (SAXS) showed a similar decrement rate of long spacing in PHBV and srPHBV films. SAXS/WAXS data revealed that when the amount of filler was increased, lamellae thickness grew. Transmission electron microscopy images illustrated well filler dispersion in the srPHBV films. Scanning electron microscopy results exhibited a significant reduction in porosity for srPHBV films once the PHBV microparticles were added. Atomic force microscopy analysis showed higher surface roughness after filler incorporation. Samples of srPHBV films showed higher barrier properties against water vapor, oxygen, and carbon dioxide. Combined properties of srPHBV films revealed the possibility of being suitable candidates for food packaging applications. POLYM. ENG. SCI., 59:E120–E128, 2019. © 2018 Society of Plastics Engineers     

Determination of mechanical properties of polymeric microspheres used in controlled drug delivery systems by nanoindentation

In this study, we synthesized poly (vinyl acetate-co-divinyl benzene) microspheres with various monomer/cross-linker contents for oral/topical sustained drug release applications and determined the micromechanical properties by nanoindentation. Compression elastic moduli of materials were calculated by using the limited depth of indentation according to Hertz elastic deformation model and presented as the histogram of multiple data. In terms of drug release practices, poly (VAc-co-DVB) microspheres with a high DVB content, especially in topical applications, are expected to carry drugs under mechanical stresses of less than 1.0 GPa.     

Study of the vertical transport in <Emphasis Type="Italic">p</Emphasis>-doped superlattices based on group III-V semiconductors

The electrical conductivity σ has been calculated for p-doped GaAs/Al_0.3Ga_0.7As and cubic GaN/Al_0.3Ga_0.7N thin superlattices (SLs). The calculations are done within a self-consistent approach to the theory by means of a full six-band Luttinger-Kohn Hamiltonian, together with the Poisson equation in a plane wave representation, including exchange correlation effects within the local density approximation. It was also assumed that transport in the SL occurs through extended minibands states for each carrier, and the conductivity is calculated at zero temperature and in low-field ohmic limits by the quasi-chemical Boltzmann kinetic equation. It was shown that the particular minibands structure of the p-doped SLs leads to a plateau-like behavior in the conductivity as a function of the donor concentration and/or the Fermi level energy. In addition, it is shown that the Coulomb and exchange-correlation effects play an important role in these systems, since they determine the bending potential.