X-ray microtomography (microCT) of the progression of sulfate attack of cement paste

High-resolution X-ray computed tomography (i.e., microCT or microtomography) was used to study the sulfate attack of cylinders of Type I cement paste cast with water-cement (w/c) ratios of 0.45, 0.50 and 0.60. Damage levels in samples exposed to a Na₂SO₄ solution with 10,000 ppm sulfate ion concentration were qualitatively rated from 0 (no damage) to 4 (extreme damage) based upon visual examination of the samples' exteriors and microtomography of the samples' interiors. The greater the w/c ratio, the more rapid the onset of sulfate damage. The corners of the cylinders appeared to be particularly susceptible to spalling, and damage may have continued into the cement paste by formation of subsurface cracks.     

Total content and dialyzable iron and zinc in foods from northern and Southern Mexico

Developing countries diets are based on a variety of plant foods that often are the main suppliers of important amounts of iron (Fe) and zinc (Zn). The objectives of this study were 1) to measure the total and dialyzable amounts of Fe and Zn in foods from Northern Mexico (Sonora) and from Southern Mexico (Oaxaca) and 2) to evaluate the effect of meat content of diets on the dialyzable amount of Fe and Zn. Methods to calculate the total dialyzable amount of Fe and Zn, were those of the AOAC and of Shen et al. Total Fe in e northern Mexican foods went from 0.78 +/- 0.0 to 11.59 +/- to 0.03 mg/ 100g (dry weight, DW); in southern Mexican foods the same micronutrient amounts were 0.86 +/- 0.18 to 8.8 +/- 0.57 mg/100 g (BS). Total Zn values were 0.91 +/- 0.00 to 13.58 +/- 0.05 mg/100 g (DW) in Sonora, and 0.64 +/- 0.18 to 20.80 +/- 0.33 mg/100 g (DW) in Oaxaca. In northern Mexico, foods dialyzable Fe had values from 0.1 +/- 0.04% to 10.6 +/- 0.36% and for Zn from 4.0 +/- 0.21% to 55.32 +/- 0.14%. Meanwhile, the range of values of dialyzable Fe for foods from Oaxaca were from 0.22 +/- 0.06% to 9.40 +/- 0.14% for and from 2.41 +/- 0.26% to 54.27 +/- 1.49% for dialyzable Zn. The average value for dialyzable Fe was higher in the foods that contained meat or meat products (p= 0.001).     

Brain mass estimation by head circumference and body mass methods in neonatal glycaemic modelling and control

Introduction

Hyperglycaemia is a common complication of stress and prematurity in extremely low-birth-weight infants. Model-based insulin therapy protocols have the ability to safely improve glycaemic control for this group. Estimating non-insulin-mediated brain glucose uptake by the central nervous system in these models is typically done using population-based body weight models, which may not be ideal.

Method

A head circumference-based model that separately treats small-for-gestational-age (SGA) and appropriate-for-gestational-age (AGA) infants is compared to a body weight model in a retrospective analysis of 48 patients with a median birth weight of 750 g and median gestational age of 25 weeks. Estimated brain mass, model-based insulin sensitivity (S_I) profiles, and projected glycaemic control outcomes are investigated. SGA infants (5) are also analyzed as a separate cohort.

Results

Across the entire cohort, estimated brain mass deviated by a median 10% between models, with a per-patient median difference in S_I of 3.5%. For the SGA group, brain mass deviation was 42%, and per-patient S_I deviation 13.7%. In virtual trials, 87–93% of recommended insulin rates were equal or slightly reduced (Δ < 0.16 mU/h) under the head circumference method, while glycaemic control outcomes showed little change.

Conclusion

The results suggest that body weight methods are not as accurate as head circumference methods. Head circumference-based estimates may offer improved modelling accuracy and a small reduction in insulin administration, particularly for SGA infants.     

The annual cycle of Flehmen in black-tailed deer (Odocoileus hemionus columbianus)

Flehmen is a stereotyped response of ungulates and other mammals to urine. In black-tailed deer, Flehmen occurs typically in males (rarely in females), and its frequency shows an annual cycle. Flehmen in response to female urine was most frequent in November, and to male urine in January. The response minimum to both types of urine occurred in May. Fifty-five to 100% of initial responses to female urine resulted in Flehmen. The deer responded more often to female urine, and the difference between the responses to female and male urine increased from May to November. A male's own urine released Flehmen more often than did urine of other males. The response intensity varied with the spatial orientation of the male to the urinating female, and responses were usually limited to distances of 15 m or less.     

The lead dioxide electrode

The recent literature dealing with the redox mechanism of the lead-acid cell positive electrode is reviewed. The basis electrochemistry of lead dioxide in its various polymorphic modifications and states of subdivision is considered in relation to the important aspects of electrode technology of which the major industrial application of the material is the conventional lead-acid cell. The proposed mechanism of the reduction (discharge) of lead dioxide in various acidic solutions are considered in relation to the present state of electrode kinetic theory. The reverse reaction by which lead dioxide is formed and the parasitic intrusion of the self discharge are dealt with as a precursor to the total cyclic process. It is concluded that in a number of respects the mechanisms proposed do not adequately represent the totality of the experimental observations. Such shortcomings are emphasized and extensions to present research are proposed.     

Electrophoretic deposition of carbon nanotubes

Electrophoretic deposition (EPD) has been gaining increasing interest as an economical and versatile processing technique for the production of novel coatings or films of carbon nanotubes (CNTs) on conductive substrates. The purpose of the paper is to present an up-to-date comprehensive overview of current research progress in the field of EPD of CNTs. The paper specifically reviews the preparation and characterisation of stable CNT suspensions, and the mechanism of the EPD process; it includes discussion of pure CNT coatings and CNT/nanoparticle composite films. A complete discussion of the EPD parameters is presented, including electrode materials, deposition time, electrode separation, deposition voltage and resultant electric field. The paper highlights potential applications of the resulting CNT and CNT/composite structures, in areas such as field emission devices, fuel cells, and supercapacitors.     

Electrochemistry at capped platinum nanoparticle Langmuir Blodgett films: A study of the influence of platinum amount and of number of LB layers

Platinum nanoparticles (n-Pt), over-grafted with 2-thiophenecarbonyl chloride are assembled on gold electrodes, by the Langmuir Blodgett (LB) technique using behenic acid (BHA) as promoting agent. These layers are electrochemically active without any preliminary activation. The [Fe(CN)₆]^3−/4− redox couple was used as electrochemical probe. This paper reports on the influence of the number of deposited LB layers, and the n-Pt density on the electrochemical response. n-Pt density was modified by the change of the “BHA/n-Pt” ratio. Cyclic voltammograms of “[Fe(CN)₆]^3−/4−” were observed whatever the coating conditions. As soon as the first layer was deposited the electrochemical response was associated to the n-Pt coverage, its response slightly increased up to a steady state for five or seven layers. As expected, the increase of the Pt density favored the increase of the current density. XPS analysis performed before and after electrochemical cycling showed that 4-mercaptoaniline capped platinum nanoparticles, and their over grafting were chemically and electrochemically stable. Analysis of influence of the number or the n-Pt density of the layers showed that the electrochemically active part of LB electrodes was provided by the last layer plus a part of the underlying one.     

Hybrid clustering solution selection strategy

Cluster ensemble approaches make use of a set of clustering solutions which are derived from different data sources to gain a more comprehensive and significant clustering result over conventional single clustering approaches. Unfortunately, not all the clustering solutions in the ensemble contribute to the final result. In this paper, we focus on the clustering solution selection strategy in the cluster ensemble, and propose to view clustering solutions as features such that suitable feature selection techniques can be used to perform clustering solution selection. Furthermore, a hybrid clustering solution selection strategy (HCSS) is designed based on a proposed weighting function, which combines several feature selection techniques for the refinement of clustering solutions in the ensemble. Finally, a new measure is designed to evaluate the effectiveness of clustering solution selection strategies. The experimental results on both UCI machine learning datasets and cancer gene expression profiles demonstrate that HCSS works well on most of the datasets, obtains more desirable final results, and outperforms most of the state-of-the-art clustering solution selection strategies.     

Image clustering based on sparse patch alignment framework

Image clustering methods are efficient tools for applications such as content-based image retrieval and image annotation. Recently, graph based manifold learning methods have shown promising performance in extracting features for image clustering. Typical manifold learning methods adopt appropriate neighborhood size to construct the neighborhood graph, which captures local geometry of data distribution. Because the density of data points’ distribution may be different in different regions of the manifold, a fixed neighborhood size may be inappropriate in building the manifold. In this paper, we propose a novel algorithm, named sparse patch alignment framework, for the embedding of data lying in multiple manifolds. Specifically, we assume that for each data point there exists a small neighborhood in which only the points that come from the same manifold lie approximately in a low-dimensional affine subspace. Based on the patch alignment framework, we propose an optimization strategy for constructing local patches, which adopt sparse representation to select a few neighbors of each data point that span a low-dimensional affine subspace passing near that point. After that, the whole alignment strategy is utilized to build the manifold. Experiments are conducted on four real-world datasets, and the results demonstrate the effectiveness of the proposed method.     

15 years of processing and dissemination of SPOT-VEGETATION products

Throughout the VEGETATION programme, the Flemish Institute for Technological Research (VITO) uninterruptedly hosted the prime user segment of both VEGETATION 1 and VEGETATION 2 multispectral instruments on board the Satellite Pour l’Observation de la Terre 4 (SPOT 4) and SPOT 5 satellites. Operational since the launch of SPOT 4 in March 1998, and foreseen to continue at least until the end of the SPOT 5 mission (anticipated in spring 2014), this user segment comprises a processing facility (PF), actively receiving, processing, correcting, archiving, and distributing the VEGETATION data and derived added-value products. First and foremost, the VEGETATION programme has been serving the needs of operational users – both institutional and commercial – requesting data in near-real time. However, scientific and educational users too benefited significantly, in particular from VEGETATION’s unique time series of the Earth’s land cover, and more specifically the vegetation cover. Over the years, the centralized archive houses processed data covering the equivalent of 11,000 times the Earth’s surface, and delivered more than 50 terapixels to around 10.000 users. As such, VEGETATION’s mission is a prime example of what Europe wants to achieve through the Global Monitoring for Environment and Security (GMES) initiative: truly operational services providing reliable and up-to-date information.

This article describes the processing facility, the way the data and products are archived, the different dissemination channels as well as the data policy adopted and the users served. One of the recent evolutions, the development of an entirely new product distribution facility (PDF), implemented as part of the Project for On-Board Autonomy – Vegetation (PROBA-V) user segment is discussed.