Real‐time Raman spectroscopic measurement of crystallization kinetics and its effect on the morphology and properties of polyolefin blown films

The nonisothermal crystallization half‐time (t_0.5), defined as the time taken for a polymer film to reach half of its equilibrium crystallinity, was estimated from Raman spectroscopic measurements of crystallinity during blown film extrusion of a linear low‐density polyethylene (LLDPE) and an isotactic polypropylene (i‐PP). The crystalline a‐ and c‐axis orientation of LLDPE and i‐PP films, respectively, increased with decreasing crystallization half‐time. The transverse direction tensile modulus and tear strengths for LLDPE films also increased with decreasing half‐time. However, for i‐PP films, only the transverse direction tear strength increased with decreasing t_0.5, while the machine direction properties did not show a significant dependence on half‐time. Our real‐time Raman spectroscopy studies provide experimental evidence to theories proposed in the literature 1 - 3 with regards to the influence of the nonisothermal crystallization process (along the film axis) on the imparted final film structure. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 98: 1740–1747, 2005     

Size and number of lymph particles measured by a particle sizer during absorption of structured oils in rats

Chylomicrons transport absorbed fat from the intestine to the circulation. During dietary fat absorption, the chylomicrons become larger in diameter, and in some studies an increase in chylomicron number has been observed as well. In the present study, we compared particle size and number in rat lymph following administration of four different oils. We administered fish oil, medium-chain TAG (MCT), and two structured oils differing in intramolecular structure, with either medium-chain FA in the outer positions of the TAG and long-chain n−3 PUFA in the sn-2 position (MLM oil) or with the reverse structure (LML oil), to lymph-cannulated rats and collected lymph in fractions for the following 8 h. Chylomicron size was measured by a particle size analyzer immediately after collection, and from these data the number of chylomicrons present was estimated. The number of particles in lymph increased during the absorption of oils containing long-chain PUFA (MLM, LML, and fish oil), whereas it was not affected by administration of MCT. The FA from MCT were probably absorbed via the portal vein; therefore, only a small number of particles were measured in lymph. When comparing the two structured oils, we observed a tendency toward a higher number of particles after LML administration, although the difference was not statistically significant. The highest number of particles after administration of all oils was observed in the size intervals 53–80 and 80–121 nm and probably represented small chylomicrons. Thus, the FA composition influenced the number of particles in lymph during absorption, whereas TAG structure had only a minor influence.     

Dietary stearic acid and risk of cardiovascular disease: Intake,sources, digestion,and absorption

Individual FA have diverse biological effects, some of which affect the risk of cardiovascular disease (CVD). In the context of food-based dietary guidance designed to reduce CVD risk, fat and FA recommendations focus on reducing saturated FA (SFA) and trans FA (TFA), and ensuring an adequate intake of unsaturated FA. Because stearic acid shares many physical properties with the other long-chain SFA but has different physiological effects, it is being evaluated as a substitute for TFA in food manufacturing. For stearic acid to become the primary replacement for TFA, it is essential that its physical properties and biological effects be well understood.     

3D Bioprinting of Gelatin–Xanthan Gum Composite Hydrogels for Growth of Human Skin Cells

In recent years, bioprinting has attracted much attention as a potential tool for generating complex 3D biological constructs capable of mimicking the native tissue microenvironment and promoting physiologically relevant cell–cell and cell–matrix interactions. The aim of the present study was to develop a crosslinked 3D printable hydrogel based on biocompatible natural polymers, gelatin and xanthan gum at different percentages to be used both as a scaffold for cell growth and as a wound dressing. The CellInk Inkredible 3D printer was used for the 3D printing of hydrogels, and a glutaraldehyde solution was tested for the crosslinking process. We were able to obtain two kinds of printable hydrogels with different porosity, swelling and degradation time. Subsequently, the printed hydrogels were characterized from the point of view of biocompatibility. Our results showed that gelatin/xanthan-gum bioprinted hydrogels were biocompatible materials, as they allowed both human keratinocyte and fibroblast in vitro growth for 14 days. These two bioprintable hydrogels could be also used as a helpful dressing material.     

Development and Validation of an Artificial Mechanical Skin Model for the Study of Interactions between Skin and Microneedles

Microneedles are small needle‐like structures that are almost invisible to the naked eye. They have an immense potential to serve as a valuable tool in many medical applications, such as painless vaccination. Microneedles work by breaking through the stratum corneum, the outermost barrier layer of the skin, and providing a direct path for drug delivery into the skin. A lot of research has been presented over the past two decades on the applications of microneedles, yet the fundamental mechanism of how they interact, pressure, and penetrate the skin in its native state is worth examining further. As such, a major difficulty with understanding the mechanism of microneedle–skin interaction is the lack of an artificial mechanical human skin model to use as a standardized substrate. In this research news, the development of an artificial mechanical skin model based on a thorough mechanical study of fresh human and porcine skin samples is presented. The artificial mechanical skin model can be used to study the mechanical interactions between microneedles and skin, but not diffusion of molecules across skin. This model can assist in improving the performance of microneedles by enhancing the reproducibility of microneedle depth insertions for optimal drug delivery and biosensing.

     

Impact of high-intensity ultrasound on physical properties and degree of oxidation of lipase modified menhaden oil with caprylic acid and/or stearic acid

The purpose of this research was to determine the effect of high-intensity ultrasound (HIU) on physical properties, degree of oxidation, and oxidative stability of structured lipids (SLs). Caprylic acid (C) and stearic acid (S) were incorporated into menhaden oil using Lipozyme® 435 lipase to obtain five samples: (1) LC 20 (menhaden oil with 20% of C), (2) LC 30 (menhaden oil with 30% C), (3) LS 20 (menhaden oil with 20% S), (4) LS 30 (menhaden oil with 30% S), and (5) Blend C (menhaden oil with 16.24% C and 13.04% S). Samples were crystallized for 90 min at the following temperatures: (1) LC 20 at 15.5°C, (2) LC 30 at 17.5°C, (3) LS 20 at 24°C, (4) LS 30 at 30°C, and (5) Blend C at 18.0°C, and HIU was applied at the onset of crystallization. Physical properties, degree of oxidation, and oxidative stability were evaluated in sonicated and nonsonicated samples. All SLs had statistically higher G′ after sonication. Sonicated LS 30, LC 30, and Blend C had a higher melting enthalpy than the nonsonicated ones, while enthalpy values in sonicated LS 20 and LC 20 samples were not statistically different than the nonsonicated ones. No significant difference between sonicated and nonsonicated samples was observed in peroxide values (1.2 ± 0.1 meq/kg, p > 0.05) and in the oxidative stability index (6.3 ± 0.2 h, p > 0.05). These results showed that HIU was effective at changing physical properties without affecting the oxidation of the samples.     

Synthesis of Co3O4 @ Organo/Polymeric Bentonite Structures as Environmental Photocatalysts and Antibacterial Agents for Enhanced Removal of Methyl Parathion and Pathogenic Bacteria

Two green nanocomposites of Co₃O₄ decorated CTAB/bentonite (Co@CT/BE) and chitosan/bentonite (Co@CH/BE) were synthesized as enhanced and environmental photocatalysts and antibacterial agents. As photocatalysts, the products were applied in the effective oxidation of toxic methyl parathion pesticide (MP) in wastewater under a visible light source. The application of Co@CH/BE (0.02 g) resulted in the complete oxidation of MP (50 mg/L) after 40 min and complete mineralization after 60 min. while the complete oxidation and mineralization of MP (50 mg/L) by Co@CT/BE was recognized after 75 min and 100 min, respectively. The Co@CH/BE composite is of higher activity than Co@CT/BE and can cause complete oxidation for MP at high concentrations up to 100 mg/L after 75 min. The oxidation pathway was illustrated considering the existence of the hydroxyl radicals as the active oxidizing species and the identified secondary organic compounds during the oxidation tests. The detected intermediate converted into end products of CO₂ and inorganic anions of SO₄^?2, NO₃^?, and PO₄^?3 at the final stages of the oxidation processes. As antibacterial agents, the two composites exhibit considerable inhabitation zones of about 20 mm against both the Gram-positive Staphylococcus aureus and Gram-negative bacterium Vibrio Sp. The synthetic Co@CH/BE showed the best antibacterial properties with 200 μg/mL as minimum inhibitory against Staphylococcus aureus.

     

Correction to: Synthesis of Co3O4 @ Organo/Polymeric Bentonite Structures as Environmental Photocatalysts and Antibacterial Agents for Enhanced Removal of Methyl Parathion and Pathogenic Bacteria

Journal of Inorganic and Organometallic Polymers and Materials -     

The HP1a disordered C terminus and chromo shadow domain cooperate to select target peptide partners

Drosophila melanogaster heterochromatin protein 1a (HP1a) is essential for compacted heterochromatin structure and the associated gene silencing. Its chromo shadow domain (CSD) is well known for binding to peptides that contain a PXVXL motif. Heterochromatin protein 2 (HP2) is a non-histone chromosomal protein that associates with HP1a in the pericentric heterochromatin, telomeres, and the fourth chromosome. Using NMR spectroscopy, fluorescence polarization, and site-directed mutagenesis, we identified an LCVKI motif in HP2 that binds to the HP1a CSD. The binding affinity of the HP2 fragment is approximately two orders of magnitude higher than that of peptides from PIWI (with a PRVKV motif), AF10 (with a PLVVL motif), or CG15356 (with LYPLL and LSIVA motifs). To delineate differential interactions of the HP1a CSD, we characterized its structure, backbone dynamics, and dimerization constant. We found that the dimerization constant is bracketed by the affinities of HP2 and PIWI, which dock to the same HP1a homodimer surface. This suggests that HP2, but not PIWI, interaction can drive the homodimerization of HP1a. Interestingly, the integrity of the disordered C-terminal extension (CTE) of HP1a is essential for discriminatory binding, whereas swapping the PXVXL motifs does not confer specificity. Serine phosphorylation at the peptide binding surface of the CSD is thought to regulate heterochromatin assembly. Glutamic acid substitution at these sites destabilizes HP1a dimers, but improves the interaction with both binding partners. Our studies underscore the importance of CSD dimerization and cooperation with the CTE in forming distinct complexes of HP1a.