Structural engineering of nanoporous anodic aluminium oxide by pulse anodization of aluminium

Nanoporous anodic aluminium oxide has traditionally been made in one of two ways: mild anodization or hard anodization. The first method produces self-ordered pore structures, but it is slow and only works for a narrow range of processing conditions; the second method, which is widely used in the aluminium industry, is faster, but it produces films with disordered pore structures. Here we report a novel approach termed "pulse anodization" that combines the advantages of the mild and hard anodization processes. By designing the pulse sequences it is possible to control both the composition and pore structure of the anodic aluminium oxide films while maintaining high throughput. We use pulse anodization to delaminate a single as-prepared anodic film into a stack of well-defined nanoporous alumina membrane sheets, and also to fabricate novel three-dimensional nanostructures.     

Influence of surface diffusion on the formation of hollow nanostructures induced by the Kirkendall effect: the basic concept

The Kirkendall effect has been widely applied for fabrication of nanoscale hollow structures, which involves an unbalanced counterdiffusion through a reaction interface. Conventional treatment of this process only considers the bulk diffusion of growth species and vacancies. In this letter, a conceptual extension is proposed: the development of the hollow interior undergoes two main stages. The initial stage is the generation of small Kirkendall voids intersecting the compound interface via a bulk diffusion process; the second stage is dominated by surface diffusion of the core material (viz., the fast-diffusing species) along the pore surface. This concept applies to spherical as well as cylindrical nanometer and microscale structures, and even to macroscopic bilayers. As supporting evidence, we show the results of a spinel-forming solid-state reaction of core-shell nanowires, as well as of a planar bilayer of ZnO-Al2O3 to illustrate the influence of surface diffusion on the morphology evolution.     

Isometric contraction induces the Ca2+-independent activation of the endothelial nitric oxide synthase

Shear stress and tyrosine phosphatase inhibitors have been shown to activate the endothelial NO synthase (eNOS) in a Ca2+/calmodulin-independent manner. We report here that isometric contraction of rabbit aorta activates eNOS by a pharmacologically identical pathway. Endothelium-intact aortic rings were precontracted under isometric conditions up to 60% of the maximal phenylephrine-induced tone. The NO synthase inhibitor NGnitro-L-arginine (L-NA) and the soluble guanylyl cyclase inhibitor NS 2028 induced an additional contraction, the amplitude of which depended on the level of precontraction. The maximal production of NO by isometrically contracted aortic rings (as estimated by the increase in cGMP in detector smooth muscle cells in a superfusion bioassay) was observed during the initial phase of isometric contraction and was greater than that detected following the application of acetylcholine. The supplementary L-NA-induced increase in vascular tone was inhibited by the nonselective kinase inhibitor staurosporine and the tyrosine kinase inhibitors erbstatin A and herbimycin A. Another tyrosine kinase inhibitor, genistein, the calmodulin antagonist calmidazolium, and the selective protein kinase C inhibitor, Ro 31-8220, had no effect. Coincident with the enhanced NO formation during isometric contraction was an increase in the tyrosine phosphorylation of endothelial proteins, which also correlated with the level of precontraction. Thus, isometric contraction activates eNOS via a Ca2+-independent, tyrosine kinase inhibitor-sensitive pathway and, like shear stress, seems to be an independent determinant of mechanically induced NO formation.     

Radar‐based structural health monitoring of wind turbine blades: The case of damage localization

This short communication reports on a radar approach for structural health monitoring of wind turbine blades. Therefore, a bistatic frequency‐modulated continuous wave (FMCW) radar in the frequency range from 33.4 to 36.0 GHz has been developed and tested experimentally using a laboratory wind turbine demonstrator. A differential damage localization framework is presented here that exploits signal differences between measurements from the intact and the damaged structure for 3D imaging of the defect. We have achieved the localization of a 30‐mm cut in a glass fiber composite structure as well as the localization of a water pack at the backside of the specimen with a localization error of several centimeters.     

Microwave-assisted catalytic oxidative dehydrogenation of ethylbenzene on iron oxide loaded carbon nanotubes

The catalytic performance of multi-walled carbon nanotubes (MWCNTs) modified by iron oxide has been investigated for oxidative dehydrogenation of ethylbenzene in an integral fixed-bed reactor conventionally-heated and under microwave-assisted conditions. The morphology and microstructural characteristics of the obtained composites before and after the catalytic reaction were characterized by transmission electron microscopy and X-ray diffraction. The content 3wt.% of iron oxide supported on MWCNTs was found optimal in respect of the ethylbenzene conversion and styrene selectivity. All prepared composites were found more selective in a microwave field in the temperature range 380-450 °C. The transformation of Fe₂O₃ into Fe nanocrystals encapsulated by polyhedral graphite shells was observed only under microwave-assisted reaction conditions.     

Predicting adult fish acute lethality with the zebrafish embryo: relevance of test duration, endpoints, compound properties, and exposure concentration analysis

The zebrafish embryo toxicity test has been proposed as an alternative for the acute fish toxicity test, which is required by various regulations for environmental risk assessment of chemicals. We investigated the reliability of the embryo test by probing organic industrial chemicals with a wide range of physicochemical properties, toxicities, and modes of toxic action. Moreover, the relevance of using measured versus nominal (intended) exposure concentrations, inclusion of sublethal endpoints, and different exposure durations for the comparability with reported fish acute toxicity was explored. Our results confirm a very strong correlation of zebrafish embryo to fish acute toxicity. When toxicity values were calculated based on measured exposure concentrations, the slope of the type II regression line was 1 and nearly passed through the origin (1 to 1 correlation). Measured concentrations also explained several apparent outliers. Neither prolonged exposure (up to 120 h) nor consideration of sublethal effects led to a reduced number of outliers. Yet, two types of compounds were less lethal to embryos than to adult fish: a neurotoxic compound acting via sodium channels (permethrin) and a compound requiring metabolic activation (allyl alcohol).     

Tool recession in the processing of window scantling with innovative core materials

Three layer laminated lumber is extensively used in the manufacture of window frames. The insulating capacity is an important factor. Some producers are trying to expand the market and have introduced novel scantlings with higher insulating capacities into the market. The core layer of these scantlings was replaced by new materials. The three types are pressed cork, Polyurethane and Purenit. In this study the wear effects of wood scantling with new core layers on the recession of blades was studied. Four different types of tungsten carbide blades with different grain sizes (normal, fine, super fine and diamond coated) were used. Results show that Purenit is the most abrasive material for blades. The glue line is also a source of destruction for blades. The authors suggest that super fine coated blade is the best type for machining wood-Purenit scantling. The two other scantlings can be machined with normal grain coated carbide blade without difficulties.