Exploring the impact of software requirements on system-wide goals: a method using satisfaction arguments and i* goal modelling

This paper describes the application of requirements engineering concepts to support the analysis of the impact of new software systems on system-wide goals. Requirements on a new or revised software component of a socio-technical system not only have implications on the goals of the subsystem itself, but they also impact upon the goals of the existing integrated system. In industries such as air traffic management and healthcare, impacts need to be identified and demonstrated in order to assess concerns such as risk, safety, and accuracy. A method called PiLGRIM was developed which integrates means-end relationships within goal modelling with knowledge associated with the application domain. The relationship between domain knowledge and requirements, as described in a satisfaction argument, adds traceability rationale to help determine the impacts of new requirements across a network of heterogeneous actors. We report procedures that human analysts follow to use the concepts of satisfaction arguments in a software tool for i* goal modelling. Results were demonstrated using models and arguments developed in two case studies, each featuring a distinct socio-technical system??a new controlled airspace infringement detection tool for NATS (the UK??s air navigation service provider), and a new version of the UK??s HIV/AIDS patient reporting system. Results provided evidence towards our claims that the conceptual integration of i* and satisfaction arguments is usable and useful to human analysts, and that the PiLGRIM impact analysis procedures and tool support are effective and scalable to model and analyse large and complex socio-technical systems.     

The turnover and distribution of labelled corticosterone during post-natal development of the duckling (Anas platyrhynchos)

During 6 months of post-natal development in the laboratory, the weight of the adrenal gland relative to body weight decreases exponentially. In the 3 day-old duckling a single intravenous dose of labelled corticosterone becomes distributed in a very large apparent volume and an "extracellular" pool that is greater than the extracellular fluid volume and the pattern of disappearance of labelled hormone from plasma is biphasic. Later during development the volumes of distribution decrease and the biphasic pattern of disappearance becomes less distinct until at 6 months only one phase of disappearance can be detected with confidence. No significant change in plasma corticosterone concentration occurs during this period of development in the laboratory. Estimations of the corticosterone secretory rates, however, indicate that whereas the adrenal weight-specific rate os secretion increases during the first 3 weeks and declines therafter, the bodyf weight-specific secretory rate continues to decline throughtout the period of increasing body weight.     

Microstructure of direct current and pulse magnetron sputtered Cr-B coatings

Chromium diboride thin films possess desirable combinations of properties (such as high hardness, wear resistance, chemical inertness, high thermal and electrical conductivity), which are attractive for a wide range of potential industrial applications. However, these properties depend strongly on the deposition process and parameters. Investigation of the resultant coating structures could explain certain differences between them, giving important information about the characteristics of the deposition process (which in this particular case is a recently developed method involving magnetron sputtering of loosely packed blended powder targets) and pointing out directions for improvement.In this paper, Cr-B coatings deposited by direct current (DC) and DC-pulse magnetron sputtering of loosely packed blended powder targets are characterised by transmission electron microscopy (TEM) techniques (electron diffraction and bright-field/dark-field imaging). The structures of the coatings deposited with different parameters are investigated and compared, and the effect of oxygen contamination on the structure is discussed.Coatings with an extremely fine, nanocolumnar structure were observed. DC sputter deposited (and generally non-stoichiometric) Cr-B coatings exhibit a short range ordered ‘zone T’ microstructure, while DC-pulse deposited stoichiometric CrB₂ coatings are dense and defect-free, crystalline and show strong preferred orientation.A small amount of contamination by oxygen of the interfacial sub-layers (due to the target material being a powder) of the DC-pulse magnetron sputter deposited stoichiometric CrB₂ (and near-stoichiometric CrB) coatings was found to affect the structure by suppressing nanocolumnar growth and promoting equiaxed, nanometer-sized grains, close to the coating/substrate interface. The majority of the coating however remained nanocolumnar.     

Fecal Coliform Removal within a Marshland Upwelling System Consisting of Scatlake Soils

The marshland upwelling system (MUS) was installed on private camps in the Grand Bay National Estuarine Research Reserve, Moss Point, Mississippi. The system was evaluated for its effectiveness in removing fecal coliforms from settled, raw wastewater. A suite of studies was performed at flow rates of 1.9, 2.8, and 5.5 L/min and an injection frequency of 30 min every 3 h to investigate fecal coliform removal. An additional study was performed at a flow rate of 2.8 L/min and an injection frequency of 15 min every hour. Overall, the MUS consistently maintained fecal concentrations below effluent regulatory standards for shellfish harvesting waters (14 most probable number of colonies per 100 mL). Mean influent concentrations of 55,269±2,218,016 colony forming units (CFU)/100 mL were reduced to effluent counts of 2.7±14.07 CFU/100 mL (observed in the 1.5 m wells). Three- to four-log reductions in influent counts were observed over the initial 1.4 vector?m from the injection well. The overall removal followed a first-order decay relationship with respect to vector distance, resulting in removal rate constants ranging from 5.6 to 6.6/m and predicted surface concentrations approaching 0 CFU/100 mL. The 2.8 L/min for 30 min every 3 h treatment provided the best effluent quality.     

Mixed Methods Research Designs in Counseling Psychology.

With the increased popularity of qualitative research, researchers in counseling psychology are expanding their methodologies to include mixed methods designs. These designs involve the collection, analysis, and integration of quantitative and qualitative data in a single or multiphase study. This article presents an overview of mixed methods research designs. It defines mixed methods research, discusses its origins and philosophical basis, advances steps and procedures used in these designs, and identifies 6 different types of designs. Important design features are illustrated using studies published in the counseling literature. Finally, the article ends with recommendations for designing, implementing, and reporting mixed methods studies in the literature and for discussing their viability and continued usefulness in the field of counseling psychology. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

The effect of the measurement frequency on the elastic anisotropy of fibre laminates

Static tests and ultrasonic measurements (2.25 MHz) have been carried out on a series of composite laminates of glass fibres in a polypropylene matrix. A range of angle ply laminates were prepared for this study, with laminate angles θ of ±0, 10, 20, 30 and 40^∘. The high frequency measurements were made using the ultrasonic immersion technique, which allows the determination of a complete set of the elastic constants of a material. The relationship between the ultrasonically determined elastic constants of the angle ply laminates was found to be in excellent agreement with theoretical predictions, as previously validated for carbon fibre/epoxy angle ply laminates. A comparison between the ultrasonic and statically measured values was made for two of the angle ply laminates (θ = 0 and 20^∘). It was found that the static values were lower than those measured at ultrasonic frequency, particularly those constants that were more matrix dominated (for example the transverse moduli of the laminates). Measurements on a pure polypropylene sample at both testing frequencies confirmed that the change in matrix properties with frequency was the cause of this difference. The change in properties with test frequency is likely to be much larger in this system than in other composite materials because the glass transition temperature of polypropylene is close to ambient temperature. Dynamic mechanical tests (1 Hz) were carried out on a sample of pure polypropylene to assess this effect. We also give an appropriate method of estimating the dependence of glass transition temperature on frequency. The results for polypropylene are compared with those for other commonly used polymer matrix materials: epoxy resin, nylon and polyetheretherketone (PEEK): DMTA measurements were also made on these samples. The effect of test frequency on matrix properties, for the glass/PP laminates, was further investigated by examining the relationship of the Poisson's ratios with laminate angle using a mixture of ultrasonic experiments and theoretical predictions. Previously we have shown that the degree of anisotropy between the reinforcing fibre and the matrix phase is paramount in determining whether the material will show a negative Poisson's ratio at a critical laminate angle. The ultrasonic measurements carried out in this study on the glass/PP laminates showed a minimum in one of the Poisson's ratio at a laminate angle of 32°, but the value did not become negative. However, theoretical predictions showed that for a static frequency measurement (1 Hz), where the matrix is softer and hence the anisotropy of each laminate ply is higher, the laminate will show a negative Poisson's ratio with a minimum at a laminate angle of around 28°.     

Enhanced adhesion of PMMA to copper with black oxide for electrodeposition of high aspect ratio nickel-iron microstructures

 Copper is widely used as a plating base for soft magnetic alloy electrodeposition in sensors and actuators. PMMA, the X-ray resist used in the LIGA process, typically has poor adhesion with copper. The use of black oxide of copper to enhance PMMA-copper adhesion was investigated. In this work, peel strength as a function of treatment time and the method of bonding was evaluated using an ASTM standard T-peel test. Peel strength increased with increasing treatment time. The feasibility of producing microstructures with predictable 3-D geometry for use in resonating sensors was investigated using the process developed. Nickel-iron structures of 100-1000 micrometers wide and 500 micrometers tall were successfully electrodeposited. Growth of other representative microstructures is being investigated. Received: 25 August 1997/Accepted: 3 September 1977     

Rough Terrain Autonomous Mobility—Part 1: A Theoretical Analysis of Requirements

A basic requirement of autonomous vehicles is that of guaranteeing the safety of the vehicle by avoiding hazardous situations. This paper analyses this requirement in general terms of real-time response, throughput, and the resolution and accuracy of sensors and computations. Several nondimensional expressions emerge which characterize requirements in canonical form.The automatic generation of dense geometric models for autonomously navigating vehicles is a computationally expensive process. Using first principles, it is possible to quantify the relationship between the raw throughput required of the perception system and the maximum safely achievable speed of the vehicle. We derive several useful expressions for the complexity of terrain mapping perception under various assumptions. All of them can be reduced to polynomials in the response distance.The significant time consumed by geometric perception degrades real-time response characteristics. Using our results, several strategies of active geometric perception arise which are practical for autonomous vehicles and increasingly important at higher speeds.