Imaging of optical disc using reflection-mode scattering-type scanning near-field optical microscopy

A phase-change optical disc was observed using a reflection-mode scattering-type scanning near-field optical microscope (RS-SNOM). In an a.c.-mode SNOM image, the 1.2 microm x 0.6 microm recording marks were successfully observed although the data were recorded on the groove. In contrast, no recording marks could be resolved in a d.c.-mode SNOM image. These results are in good agreement with those from a numerical simulation using the finite difference time domain method. The resolution was better than 100 nm with a.c.-mode SNOM operation and the results indicate that recording marks in phase-change optical media can be directly observed with the RS-SNOM.     

Theasaponin E1 destroys the salt tolerance of yeasts

Cells of Zygosaccharomyces rouxii in a medium containing a high concentration of NaCl were killed during incubation for 2-4 h with a low concentration of a mixture of saponins from tea seeds (TSS). The higher the concentration of NaCl in the medium, the higher the inhibitory effect of TSS on the growth of the yeast. The above inhibitory effect of TSS on the growth of the yeast was not observed when cells were incubated in hypertonic media composed of nonionic substances such as sugars. The ATPase activity of plasma membrane preparations from the yeast cells was slightly affected by the addition of TSS. It is shown that TSS facilitates leakage of glycerol from the yeast cells under NaCl-hypertonic conditions. The major inhibitor in the mixture of saponins was isolated and identified as theasaponin E1. Its isomer, theasaponin E2, did not have any effect on the salt tolerance of Z. rouxii or Saccharomyces cerevisiae.     

Processability and mechanical properties for binary blends of PP and LLDPE produced by metallocene catalyst

Processability at extrusion coating and mechanical properties of the films obtained are investigated by means of linear and nonlinear rheological measurements and tensile tests for blends of polypropylene (PP) and linear low‐density polyethylene (LLDPE). Both materials are produced by metallocene catalyst. The processability of PP is found to be improved by the addition of LLDPE; the blend shows low level of motor torque and head pressure in an extruder and small level of neck‐in as compared with pure PP. Further, the anisotropy of ultimate tensile strength, which is prominent for PP, is reduced by blending with LLDPE. As a result, the blend having 20 wt % of LLDPE shows appropriate properties in the molten state for extrusion coating and in the solid state as a film. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

基于荧光显微镜的毛细管电泳系统的构建

毛细管电泳仪具有灵敏度高、分析速度快等优势,为降低其生产成本,基于电泳原理,以荧光显微镜为基础,设计了一套毛细管电泳系统。以20 bp(base pairs,碱基对)DNA ladder和100 bp DNA ladder为样本,全面分析了系统的稳定性、灵敏度和分离效果。结果表明:该系统在9 min内可以实现1500 bp以内DNA片段的高效分离,系统检测极限为0.1 ng/μL;在优化的电泳条件下,对限制性内切酶φX174-HincⅡ作用过的λ-DNA片段5 min内实现了291 bp与297 bp DNA片段的区分。     

Process and device characterization for a 30-GHz fT submicrometer double poly-Si bipolar technology using BF2-implanted base with rapid thermal process

Process and device parameters are characterized in detail for a 30-GHz f_T submicrometer double poly-Si bipolar technology using a BF₂-implanted base with a rapid thermal annealing (RTA) process. Temperature ramping during the emitter poly-Si film deposition process minimizes interfacial oxide film growth. An emitter RTA process at 1050°C for 30 s is required to achieve an acceptable emitter-base junction leakage current with an emitter resistance of 6.7×10^-7 Ω-cm², while achieving an emitter junction depth of 50 nm with a base width of 82 nm. The primary transistor parameters and the tradeoffs between cutoff frequency and collector-to-emitter breakdown voltage are characterized as functions of base implant dose, pedestal collector implant dose, link-base implant dose, and epitaxial-layer thickness. Transistor geometry dependences of device characteristics are also studied. Based on the characterization results for poly-Si resistors, boron-doped p-type poly-Si resistors show significantly better performance in temperature coefficient and linearity than arsenic-doped n-type poly-Si resistors     

Growth features of crystals in laser‐welded aluminium and aluminium alloys

In the present work, the increase in the basicity index of the slag system of the flux, represented by the ternary system of MnO–SiO₂–CaO oxides, is evaluated. The increment of the basicity index is performed by the addition of CaO, keeping the MnO/SiO₂ percentage relation of the system constant, in order to evaluate the behaviour of the chemical composition resulting from the metal deposited by SAW. As a result, it is possible to intensify the Mn transfer to the deposited metal and at the same time attenuate that of the Si, S, P and the carbon remains basically unalterable. All this makes it possible, in combination with low-manganese wire, to obtain similar results to those obtained with fluxes of lower basicity in combination with medium manganese wires.     

Criteria for versatile GaN MOVPE tool:high growth rate GaN by atmospheric pressure growth

Growth rate has a direct impact on the productivity of nitride LED production.Atmospheric pressure growth of GaN with a growth rate as high as 10μm/h and also Al_0.1Ga_0.9N growth of 1μm/h by using 4 inch by 11 production scale MOVPE are described.XRD of（002） and（102） direction was 200 arcsec and 250 arcsec, respectively.Impact of the growth rate on productivity is discussed.     

Colorless polyimides derived from 1S,2S,4R,5R-cyclohexanetetracarboxylic dianhydride,self-orientation behavior during solution casting,and their optoelectronic applications

A novel cycloaliphatic monomer for polyimides (PI), 1S,2S,4R,5R-cyclohexanetetracarboxylic dianhydride (H′-PMDA) is proposed in this work. H′-PMDA shows high polymerizability with various diamines in contrast to its isomer, i.e., conventional hydrogenated pyromellitic dianhydride (H-PMDA) and leads to highly flexible and colorless PI films with very high T_g's. In particular, the combinations with rigid structures of diamines give rise to PIs with significantly decreased coefficients of thermal expansion (CTE) owing to high extents of in-plane chain orientation induced by thermal imidization, whereas the H-PMDA-based counterparts do not. The decreased CTE reflects structural rigidity/linearity of the H′-PMDA-based diimide units as supported by liquid crystallinity observed in the corresponding model compound. Solution casting of a chemically imidized PI derived from H′-PMDA and 2,2′-bis(trifluoromethyl)benzidine (TFMB) results in a lower CTE than that of the thermally imidized counterpart, suggesting the presence of a self-orientation phenomenon during solvent evaporation. The mechanism is proposed in this work. H′-PMDA/TFMB and its copolymer systems can be useful as plastic substrates in image display devices and/or novel coating-type optical compensation films.     

A method to determine direct‐ and quadrature‐axis inductances of permanent magnet synchronous motors

The equivalent circuit constants of permanent magnet synchronous motors are needed in the calculation of operation characteristics, construction of a control system, etc. These constants can be computed from the data on structural form and materials. However, measurements are necessary to obtain highly precise values. Methods for measurement of the d‐ and q‐axis inductances can be roughly divided into rotational and standstill methods. The standstill methods have the advantage that they are easy to carry out. However, it is difficult to consider magnetic saturation and distortion of the change in the armature winding inductance. The accuracy of the standstill method can be improved if these effects can be readily taken into account. This paper describes a standstill method for measuring accurate d‐ and q‐axis synchronous inductances of permanent magnet synchronous motors. By utilizing the fact that the EMF interference terms in the motor voltage equation considering the distortion of the inductance change are equal to zero when the rotor is in a specific position, the proposed method determines the inductances considering both magnetic saturation and inductance distortion effects from simple off‐line standstill testing. In addition, this method is capable of taking cross‐magnetic saturation into account when used with the necessary testing equipment. The proposed method was implemented on a 0.4‐kW interior permanent magnet synchronous motor with concentrated stator winding. The validity of the proposed method was demonstrated by comparing the measured and calculated results of the no‐load and on‐load characteristics. © 2010 Wiley Periodicals, Inc. Electr Eng Jpn, 171(3): 41–50, 2010; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20969