医用外照射微波辐射器的改进和临床应用

针对医用外照射微波辐射器临床应用存在的问题,将同轴－波导转换中针形激励线改为略带锥形的阿基米德螺线,从而使驻波系数等参数得到改善,并减小了体积、重量与微波泄漏,经临床使用,疗效满意。     

基于奇异值分解的图像匹配方法

传统的图像匹配方法中, 由于实时图和参考图之间存在着灰度差异和几何形变,仅用灰度作为特征进行匹配算法的性能很容易受到影响。文中提出了一种基于奇异值分解的图像匹配方法。该方法首先利用奇异值分解方法,求出模板图像矩阵的奇异值及奇异值向量,用它们作为模板图像的特征代替传统算法中的灰度对两幅待匹配图像进行全局搜索定位。由于奇异分解方法所特有的优越性,匹配实验取得了良好效果。实验结果验证了该方法的有效性。     

Uniplanar one-dimensional photonic-bandgap structures andresonators

This paper presents uniplanar one-dimensional (1-D) periodical structures, so-called photonic-bandgap (PBG) structures, and defect high-Q resonators for coplanar waveguide, coplanar strip line, and slot line. Proposed uniplanar PBG structures consist of 1-D periodically etched slots along a transmission line or alternating characteristic impedance series with wide band-stop filter characteristics. A stop bandwidth obtained is 2.8 GHz with a stopband rejection of 36.5 dB. This PBG performance can be easily improved if the number of cells or the filling factor is modified in a parametric analysis. Using uniplanar 1-D PBG structures, we demonstrate new high-Q defect resonators with full-wave simulation and measured results. These structures based on defect cavity or Fabry-Perot resonators consist of a center resonant line with two sides of PBG reflectors. They achieve a loaded Q of 247.3 and unloaded Q of 299.1. The proposed circuits should have many applications in monolithic and hybrid microwave integrated circuits     

An efficient frequency offset estimator for OFDM systems and itsperformance characteristics

In this paper, we propose a new frequency synchronization algorithm for orthogonal frequency division multiplexing (OFDM) systems requiring only one training symbol, based on a conventional method which requires two training symbols. While the timing synchronization is obtained by using the conventional method, the carrier frequency offset is efficiently estimated by the proposed method. It is shown that the proposed method not only reduces the number of the training symbols but also possesses better performance than the conventional method without increase in complexity     

Haptic information in Internet-based teleoperation

Many tasks can be done easily by humans turn out to be very difficult to accomplish with a teleoperated robot. The main reason for this is the lack of tactile sensing, which cannot be replaced by visual feedback alone. Once haptic devices are developed, their potential in many fields is obvious. Especially, in teleoperation systems, where haptic feedback can increase the efficiency and even render some tasks feasible. This paper studies Internet-based teleoperation systems that include haptic feedback, concentrating on the control of such systems and their performance. The potential of this technology and its advantages are explored. In addition, key issues, such as stability, synchronization, and transparency are analyzed and studied. Specifically, an event-based planning and control of Internet-based teleoperation systems is presented with experimental results of several implemented system scenarios in micro- and macro-scales     

分子束外延生长高应变单量子阱激光器

采用分子束外延方法研究了高应变InGaAs/GaAs量子阱的生长技术.将InGaAs/GaAs量子阱的室温光致发光波长拓展至1160nm,其光致发光峰半峰宽只有22meV.研制出1120nm室温连续工作的InGaAs/GaAs单量子阱激光器.对于100μm条宽和800μm腔长的激光器,最大线性输出功率达到200mW,斜率效率达到0.84mW/mA,最低阈值电流密度为450A/cm2,特征温度达到90K.     

滚仰式捷联导引头视线角速度提取技术研究

滚仰式捷联导引头具有很好的应用前景,但在过顶跟踪时提取稳定的视线角速度问题一直没有妥善的解决方法。提出一种利用导引头提供的失调角、框架角及框架角速度等信息构建"虚拟偏仰式导引头"的方法,设计Kalman滤波器对目标垂直视线运动信息进行估计,进而间接提取出视线角速度信息,用于产生制导指令。仿真结果表明,在过顶跟踪时该方法能有效抑制视线角速度抖动,视线角速度精度显著提高。     

背景光存在下的相衬法原理分析

为了更好地观察弱相位物的位相,在考虑背景光的情况下,对任意相位物体的相衬成像过程进行严格的数学推导及分析,得到有背景光时的相衬法成像光强普遍表达式。结果表明,有背景光时的相板相移量及其透过率存在最佳值;若采用CCD接收图像,弱相位物的最小可观察相位变化量达1.9mrad。这为弱相位物体的精确测量提供了有力的数学论证。     

X波段介质谐振器振荡器和缓冲放大器的研究

微波振荡器代表所有基本微波通信系统的能源来源。研究设计8．95GHz的低噪声砷化镓场效应管并联反馈介质谐振器振荡器,为了放大输出功率和提高负载牵引,在介质谐振器振荡器后一级加缓冲放大器,最终的输出功率是＋13．33dBm。测试证明输出信号的相位噪声偏离中心频率100kHz可达-116．49dBc／Hz,偏离中心频率10kHz可达-91．74dBc／Hz。     

基于高非线性Sagnac干涉仪的超高速全光NOT门可级联性研究

在未来的通信领域中,全光逻辑门是全光计算机和全光网络的基本单元。目前已经提出了很多实现全光逻辑门的结构和方法,但是全光逻辑的技术瓶颈也出现了,就是怎样能够将单个的全光逻辑门级联起来实现更复杂的逻辑关系。现存的全光逻辑门结构一般不具有很好的可以实现多级连接的级联性,而且现有的对于级联性的分析大都停留在理论层面,而没有与实际情况相结合,所以对于实际应用来说意义很小。提出了一种新型的基于高非线性Sagnac 干涉仪的超高速全光NOT 门,建立了它的数学模型,采用了与实际情况更加接近的高斯脉冲模拟输入光,并且在仿真结果的基础上分析了系统的级联性,对级联性的分析考虑了光纤损耗和走离效应的影响。得到的基本结论表明,所提出的全光逻辑门的结构能够在实际情况下保持良好的级联性。