Janus particle amphiphilicity and capillary interactions at a fluid interface

Studying the behavior of anisotropic particles at fluid interfaces is a rapidly expanding field, as understanding how the introduced anisotropy affects the resulting properties is essential in the engineering of interfacial systems. Surface anisotropic particles, also known as Janus particles (JPs), offer new possibilities for novel applications due to their amphiphilicity and stronger binding to fluid interfaces compared to homogeneous particles. Introducing surface anisotropy creates complexity as the orientation of interfacially bound particles affects interparticle interactions, a contributing factor to the microstructure formation. In this work, we have investigated the microstructure of JP monolayers formed at the air–water interface using particles with different degrees of amphiphilicity and examined the response of the networks to applied compressions. Our findings demonstrate that JPs amphiphilicity is a crucial factor governing their orientation at the interface, which in turn dictates the complexity of the capillary interactions present and the mechanical properties of the ensuing networks.     

Rainfall crosspolarisation of linearly and circularly polarised waves at microwave frequencies

The isolation between right- and left-hand circularly polarised plane waves is evaluated and compared with that between orthogonal linear plane waves for propagation through rain with nonspherical drops. It is seen that the linear orthogonal mode of propagation will give superior isolation when a distribution of raindrop canting angles is considered.     

Corrosion behavior of porous magnesium coated by plasma electrolytic oxidation in simulated body fluid

Porous magnesium has a great potential to be used as degradable bone scaffolds. In this study, porous magnesium with 35% percolating porosity has been successfully fabricated through powder metallurgy route utilizing space holders. The intrinsic mechanical properties of the porous magnesium were measured by nanoindentation testing and analyzed with the Oliver–Pharr method. Afterward, a ceramic coating on the surface of the porous magnesium was performed by plasma electrolytic oxidation (PEO) treatment in a silicate‐based solution. The morphology and composition results of the PEO coatings indicated that it is possible to apply a homogenous and adhesive ceramic coating layer on all free surface of the porous magnesium through PEO method. The protective performance of the PEO coatings was evaluated using by potentiodynamic polarization and electrochemical impedance spectroscopy tests in simulated body fluid. The results revealed the PEO coating significantly improves biocorrosion resistance of the porous magnesium. Therefore, it can be used as an effective method to control the degradation rate of porous magnesium implants in the human body.     

Effect of storage options on price-based scheduling for a hybrid trigeneration system

Trigeneration is efficient to supply cooling, heat, and power demands. Also, hydro (pumped) storage with zero fuel costs can increase profit when price-based scheduling problem is solved. The goal of this study is to investigate the effects of electric boiler, hydro storage, and heat storage tank on price-based scheduling problem for hybrid trigeneration (trigeneration-conventional-gas boiler) system. A heuristic algorithm is applied to a power system where in validation case, total cost reduction of 0.63% to 0.91% is reached as compared with reported in literature. The results show that the utilization of electric boiler, hydro storage, and heat storage tank leads to profit improvement by 4.58%. Also, a critical sensitivity analysis is conducted and the results show the significant effects of several factors on scheduling results.     

SFQ: Social Features Based Quota Routing in Mobile Social Networks

Wireless Personal Communications - Mobile social networks are networks with mobile nodes which have social properties. Various methods for routing have been introduced in these networks. Some of...     

An Optimized Fuzzy-Padé Controller Applied to Attitude Stabilization of a Quadrotor

International Journal of Control, Automation and Systems - In this research, an Optimized Fuzzy-Padé Controller (OFPC) for attitude stabilization of a quadrotor is proposed by using Padé...     

Effect of seed layers on low-temperature,chemical bath deposited ZnO nanorods-based near UV-OLED performance

Low-temperature wet chemical bath deposition (CBD) method is one of the most efficient and least hazardous solution-based techniques which is widely employed to grow ZnO NRs. In CBD method, a seed layer is usually deposited on the substrate. In this paper, high quality ZnO and aluminum doped ZnO (AZO) seed layers are sputtered on the indium tin oxide (ITO) coated glass. In continue, aligned ZnO NRs are grown on the AZO and ZnO seed layers via CBD technique. The effect of the growth time and seed layer on the physical properties of as-grown ZnO NRs are investigated. According to the results, the seed layer plays an essential role on the growth orientation and growth rate of the ZnO NRs. The ZnO NRs grown on AZO seed layer are more aligned rather than ZnO seed layer due to their higher texture coefficients. The relative photoluminescence (PL) intensity ratio of near band emission (NBE) to deep level emission (DLE) (I_NBE/I_DLE) for the ZnO NRs grown on AZO and ZnO seed layers are calculated as 7.45 and 2.62, respectively. To investigate the performance of the as-grown ZnO NRs, near ultraviolet organic light-emitting diodes (UV-OLEDs) using ZnO NRs array as n-type material and poly [2-methoxy-5-(2-ethyl-hexyloxy)-1,4-phenylene-vinylene] (MEH-PPV) conjugated polymer as p-type material have been fabricated. The total concentration of traps ($N_t$), the characteristic energies ($E_t$) and the turn-on voltages for the devices with the structures of ITO/AZO/ZnO NRs/MEH-PPV/Al (device A) and ITO/ZnO/ZnO NRs/MEH-PPV/Al (device B) are attained 7.65 × 10¹⁶ and 7.75 × 10¹⁶ cm^?3, 0.232 and 0.206 eV, 23 and 21 V, respectively. Moreover, based on the electroluminescence (EL) spectra, the NBE peaks for device A and B are obtained nearly in the wavelengths of 382 and 388 nm, respectively. Finally, various charge carrier transportation processes of prepared UV-OLEDs have been studied, systematically.