Analysis of an Approximate Decorrelating Detector

In this paper an approximate decorrelating detector is analyzed on the basis of a first order approximation to the inverse crosscorrelation matrix of signature waveforms. The approximation is fairly accurate for systems with low crosscorrelations and is exact in the two-user synchronous case. We present an exact as well as approximate analysis of the bit-error-rate performance of this detector on a channel that is subject to flat fading, and also specifically for the case of random signature waveforms. The detector outperforms the conventional matched filter receiver in terms of BER. The approximate decorrelator (while not being near-far resistant like the decorrelating detector) is fairly robust to imperfections in power control. Power trade-off regions are identified which characterize the significant advantage that the approximate decorrelator provides over the matched filter receiver. The reduced complexity of the approximate decorrelator and performance gains over the conventional matched filter makes it a viable alternative for implementation in practical CDMA systems, in particular in those where the signature waveforms span many symbol intervals.     

Shumbler: a 155 Mb/s BiCMOS synchronous multiplexer chip for abroad-band customer premises network

The shumbler (shuffler/scrambler) is a circuit designed and fabricated to form part of a broadband customer premises network. The circuit is implemented in 1.2-μm BiCMOS double-metal technology. The circuit is bidirectional, and can perform the functions of scrambling and shuffling or descrambling and unshuffling by means of control signals to three integrated multiplexers. The shumbler also includes a programmable multiplexer that allows the selection of one out of the 16 output channels of the shuffler through a serial output for local system test purposes. The shumbler circuit interfaces emitter-coupled-logic (ECL) and transistor-transistor-logic (TTL) logic levels using a single power supply of -5 V, dissipating 1.5 W, and encapsulated in a 68-pin LCC package with a flat heat spreader which ensures a thermal resistivity of about 10°C/W     

Criterion for signal extraction in underdetermined mixtures of bounded support

This work studies the problem of recovering a complex signal (source) from an underdetermined linear mixture of bounded sources. We assume some a priori information of the desired signal in the form of a training sequence and complete absence of knowledge from the other sources, except for their bounded character. The main contribution of this letter is the proposal of a bounded component analysis of the training error that tries to condense the relevant information of the observations in a linear estimate of the desired signal. This subspace can be later used for subsequent refined estimation of the signal of interest. Simulations corroborate the good performance of the proposed method in high SNR scenarios.     

White Electroluminescence by Supramolecular Control of Energy Transfer in Blends of Organic‐Soluble Encapsulated Polyfluorenes

Here, it is demonstrated that energy transfer in a blend of semiconducting polymers can be strongly reduced by non‐covalent encapsulation of one constituent, ensured by threading of the conjugated strands into functionalized cyclodextrins. Such macrocycles control the minimum intermolecular distance of chromophores with similar alignment, at the nanoscale, and therefore the relevant energy transfer rates, thus enabling fabrication of white‐light‐emitting diodes (CIE coordinates: x = 0.282, y = 0.336). In particular, white electroluminescence in a binary blend of a blue‐emitting, organic‐soluble rotaxane based on a polyfluorene derivative and the green‐emitting poly(9,9‐dioctylfluorene‐alt‐benzothiadiazole ( F8BT ) is achieved. Morphological and structural analyses by atomic force microscopy, fluorescence mapping, µ‐Raman, and fluorescence lifetime microscopy are used to complement optical and electroluminescence characterization, and to enable a deeper insight into the properties of the novel blend.     

Sub-1 V band-gap based and MOS threshold-voltage based voltage references in 0.13 µm CMOS

Portable and implantable device applications require low supply voltage reference circuits due to increasing trend for lower power requirements. Voltage references have been proposed for operation below 1 V for CMOS and a comprehensive analysis of the behavior of the different topologies is needed for ultra-low power designs, in order to select the right circuit topology for a given requirement. This work compares two major classes of voltage reference topologies: threshold voltage (V_T0)-based and (V_G0) bandgap voltage-based reference circuits. Four different topologies of voltage-reference designs with 1-V supply were designed and fabricated in 130 nm CMOS process. Monte Carlo analysis shows the variability of the references and of their temperature coefficients (TC), and the results are compared to measured samples. Simulations and measurements show that the threshold voltage-based references are more susceptible to the variations in the CMOS fabrication process.     

Analysis of high voltage step-up nonisolated DC–DC boost converters

A high voltage step-up nonisolated DC–DC converter based on coupled inductors suitable to photovoltaic (PV) systems applications is proposed in this paper. Considering that numerous approaches exist to extend the voltage conversion ratio of DC–DC converters that do not use transformers, a detailed comparison is also presented among the proposed converter and other popular topologies such as the conventional boost converter and the quadratic boost converter. The qualitative analysis of the coupled-inductor-based topology is developed so that a design procedure can be obtained, from which an experimental prototype is implemented to validate the theoretical assumptions.     

3G基站的测试

３Ｇ的出现意味着需要测试更多的基站、检查新的更加复杂的参数 ,同时出现破坏性干扰的概率也正在不断提高。由于新的安装项目中共存了多个阶段的２Ｇ、２．５Ｇ和其他无线系统 ,并且ＧＳＭ、ＴＤＭＡ、ｃｄｍａＯｎｅ、ＨＳＣＳＤ、ＧＰＲＳ、ＥＤＧＥ、ＥＧＰＲＳ、ＩＳ -１３６Ｂ／ＨＳ和ＩＳ-９５Ｂ系统在多年内都有可能同时运行 ,这样 ,基站已经成为不能预测的、连续变化的、为不断增长的各种移动设备服务的老技术平台和新技术平台的组合。在一个基站中 ,可能会遇到几种蜂窝系统发出的信息及各种来源的干扰 ,如广播、寻呼和本地网络服…     

Finding Multiple Equivalence-Preserving Transformations in Combinational Circuits through Incremental-SAT

This paper introduces an approach to effectively exploit incremental SAT in order to search for multiple equivalence-preserving transformations of combinational circuits. Typical applications, such as redundancy removal with observability and external care conditions, adequate abstractions and other optimizations used in a state-of-the-art SAT-based model checker, can reap benefits from the proposed strategies. Our techniques exploit SAT incrementality, by iteratively refining the set of candidate transformations with a counter-example driven analysis, until an unsatisfiable point is reached. The key point of our technique is the ability to address satisfiable instances first, where SAT solvers are generally much faster than with unsatisfiable runs. We also discuss partitioning and problem reduction issues, that are fundamental in order to provide a scalable approach. Experimental results show the effectiveness of the proposed strategies.     

A Time-Domain Digital-Intensive Built-In Tester for Analog Circuits

To solve test challenges in nanometer CMOS technologies, a time-domain digital-intensive built-in tester for analog circuits is proposed. The compact tester allows characterizations of AC response and DC gain for various analog circuits which have a low-pass frequency characteristic. By applying ramp signals to stimulate the circuit under test and measuring slopes and time delays of its responses, the testing can be simple and robust over process-voltage-temperature variations. Also, it is well suited for nanometer technologies because of its digital-intensive implementation. The tester was fabricated in 65 nm standard CMOS process and occupies 0.026 mm².     

Mining statistically significant associations for exploratory analysis of human sleep data.

We introduce a specialized association rule mining technique that can extract patterns from complex sleep data comprising polysomnographic recordings, clinical summaries, and sleep questionnaire responses. The rules mined can describe associations among temporally annotated events and questionnaire or summary data; e.g., the likelihood that an occurrence of a rapid eye movement (REM) sleep stage during the second 100 sleep epochs of the night is associated with moderate caffeine intake. We use chi2 analysis to ensure statistical significance of the mined rules at the level P < 0.05. Our results, obtained by mining sleep-related data from 242 human subjects, reveal clinically interesting associations among the polysomnographic and summary variables. Our experience suggests that association mining may also be useful for selection of variables prior to using logistic regression.