Polymerizable Skin Hydrogel for Full Thickness Wound Healing

The skin is the largest organ in the human body, comprising the main barrier against the environment. When the skin loses its integrity, it is critical to replace it to prevent water loss and the proliferation of opportunistic infections. For more than 40 years, tissue-engineered skin grafts have been based on the in vitro culture of keratinocytes over different scaffolds, requiring between 3 to 4 weeks of tissue culture before being used clinically. In this study, we describe the development of a polymerizable skin hydrogel consisting of keratinocytes and fibroblast entrapped within a fibrin scaffold. We histologically characterized the construct and evaluated its use on an in vivo wound healing model of skin damage. Our results indicate that the proposed methodology can be used to effectively regenerate skin wounds, avoiding the secondary in vitro culture steps and thus, shortening the time needed until transplantation in comparison with other bilayer skin models. This is achievable due to the instant polymerization of the keratinocytes and fibroblast combination that allows a direct application on the wound. We suggest that the polymerizable skin hydrogel is an inexpensive, easy and rapid treatment that could be transferred into clinical practice in order to improve the treatment of skin wounds.     

Fabrication of microstructures on different materials by diode-pumped solid state laser writing for microfluidics applications

Laser writing attached many attentions for fabrication micro-channels in microfluidics devices and lab-on-chip devices for biomedical applications. In this study, micro-channels were fabricated on different materials as masters using nanosecond diode-pumped solid state (DPSS) laser writing for imprinting on glass and polymer microfluidics devices. Good quality microstructures were fabricated on silicon, nickel alloy, cooper/brass and alumina, respectively by laser writing which proved that the nanosecond DPSS laser is suitable for rapid prototyping and rapid manufacturing of surface microstructures on different substrates as mask-less exposure system of imprinting.     

Control of attendance applied in higher education through mobile NFC technologies

This paper presents an improved attendance control system, required for continuous evaluation which has become compulsory following the Bologna Process. It provides a solution based on NFC technology and is based on a real project developed and pilot tested at the “Universidad Pontificia de Salamanca, Campus Madrid”.     

Models and emerging trends of concurrent constraint programming

Concurrent Constraint Programming (CCP) has been used over the last two decades as an elegant and expressive model for concurrent systems. It models systems of agents communicating by posting and querying partial information, represented as constraints over the variables of the system. This covers a vast variety of systems as those arising in biological phenomena, reactive systems, net-centric computing and the advent of social networks and cloud computing. In this paper we survey the main applications, developments and current trends of CCP.     

Analysis of the gate current as a suitable indicator for FET degradation under nonlinear dynamic regime

Electron device degradation, although not directly accounted for, represents a key issue in microwave circuit design. This is especially true when the particular applications involved (e.g., satellite, military, consumer) do not allow or strongly discourage any kind of maintenance. As a matter of fact, in order to account for device degradation in circuit design, a suitable electron device model is needed which is able to predict the performance degradation as a function of the actual electrical regime involved in the device operation. Such a kind of model is not available in literature. In this paper, quantitative results are provided for device degradation indicators which correlate DC and RF stress experiments. These results can be considered an important step toward the definition of a nonlinear model accounting for device degradation.     

Criterion for signal extraction in underdetermined mixtures of bounded support

This work studies the problem of recovering a complex signal (source) from an underdetermined linear mixture of bounded sources. We assume some a priori information of the desired signal in the form of a training sequence and complete absence of knowledge from the other sources, except for their bounded character. The main contribution of this letter is the proposal of a bounded component analysis of the training error that tries to condense the relevant information of the observations in a linear estimate of the desired signal. This subspace can be later used for subsequent refined estimation of the signal of interest. Simulations corroborate the good performance of the proposed method in high SNR scenarios.     

Uncertainty contribution of tip-sample angle to AFM lateral measurements

AFM measurements are very important for quality control in the photovoltaic, microfluidic, electronic or micro-optic industries. This work proposes an algorithm to complete the uncertainty evaluation of AFM systems along the XY-axis under conditions where tolerance of curved surfaces must be controlled. This algorithm is also tested for tilt angles between tip and sample from 0° to 9° using an experimental arrangement which consists of an AFM instrumented with an inclinometer and four step height standards.Results show good agreement between the theoretical model and experimental results for samples with larger steps TGZ03 (465 nm) and TGZ11 (1416 nm), but with poor results for the smaller samples TGZ01 (17.6 nm) and TGZ02 (73.1 nm). An angle of 9° shows an error of about 3% in the horizontal determination of the step dimension, but it could increase to 47% for a tilt angle of 30° according to the theoretical model.The angle error between tip and sample is included in the uncertainty budget using a uniform distribution. An evaluation is performed in a theoretical rolling machine for imprint lithography where a step must be measured with nominal dimensions of 3 μm—X-axis and 1 μm—Z-axis. An assumed tip-sample angle is assumed that changes from 0° to 22.5° (curved form) and produces an uncertainty contribution to the X measurement of 55.7 nm. This uncertainty is important and must be considered to guarantee tolerances in quality control of curved form products.     

Effect of different parameters on the in situ thermal conductance evaluation

In the last years many studies have been carried out on the possible improvements of the in situ thermal conductance measurement; as well known, this has to be derived by recorded values of temperatures and heat fluxes. A big effort has been addressed in the implementation and comparison of different analysis methods. The aim of this paper is to widen the existent literature in the study of the influence of different kinds of input data on the final result. First the problem of analysing input data with significant drift in temperature is considered, adopting both nominal clean and noise affected data. Then the effect due to the presence of the Heat Flux Meter (HFM) on the thermal field of the testing element has been analysed, as well as the possibility of recording HFM surface temperature. These studies are based on Finite Element Method (FEM) simulations; both nominal clean and noise affected data have been considered as input. Finally, a difference in emissivity between the heat flux meter and internal plaster surface has been analysed by means of FEM simulations based on nominal clean data. An overall estimation of the occurred deviations in the different cases is shown.     

A brief note on thermoluminescence analysis of photosystem II and lipid peroxidation during the shelf life of ready-to-use rocket (Diplotaxis tenuifolia L.)

The quality of leafy vegetables has to be guaranteed for consumers over the whole postharvest period, usually limited to 5–7 days. The analyses to evaluate the quality of vegetables are very time- and resource consuming, so the use of qualitative markers can be much useful. The aim of this work was to evaluate the use of thermoluminescence (TL) parameters as qualitative markers of fresh-cut leafy vegetables during the shelf life. TL is a technique consisting of a cooling, followed by the progressive warming, of a preilluminated sample to reveal the different types of charge pairs as successive emission bands, which are resolved better than the corresponding decay phases recorded at constant temperature. Experiments were performed on rocket (Diplotaxis tenuifolia L.) stored at 2 °C for 7 days. During storage, several changes in TL glow curves were found. The position of the peaks showed a shift to higher temperature. The area of the peaks, relating to the photosystem II (20–65 °C), grew up lightly; whereas in the temperature range that detects lipidic peroxidation (65–140 °C), the TL emission became more than twice. These changes demonstrated that, during the shelf life, a progressive destabilization of PSII centres occurred and that lipid peroxidation products were accumulated in membranes. TL could be used to estimate the damages immediately after as well as during the storage period. This is the first time that TL was used to evaluate the quality of fresh-cut vegetables products during the shelf life.