Direct-Ink-Writing of Electroactive Polymers for Sensing and Energy Storage Applications

Considering the high levels of materials used in the fields of electronics and energy storage systems, it is increasingly necessary to take into consideration environmental impact. Thus, it is important to develop devices based on environmentally friendlier materials and/or processes, such as additive manufacturing techniques. In this work, poly(vinylidene fluoride) (PVDF) and poly(vinylidene fluoride-co-hexafluoropropylene) (PVDF-HFP) are prepared by direct-ink-writing (DIW) by varying solvent evaporation temperature and fill density percentage. Different morphologies for both polymers are obtained, including dense films and porous membranes, as well as different electroactive β-phase content, thermal and mechanical properties. The dielectric constant and piezoelectric d₃₃ coefficient for dense films reaches up to 16 at 1 kHz and 4 pC N⁻¹, respectively for PVDF-HFP with a fill density of 80 and a solvent evaporation temperature of 50 °C. Porous structures are developed for battery separator membranes in lithium-ion batteries, with a highest ionic conductivity value of 3.8 mS cm⁻¹ for the PVDF-HFP sample prepared with a fill density of 100 and a solvent evaporation temperature of 25 °C, the sample showing an excellent cycling performance. It is demonstrated that electroactive films and membranes can be prepared by direct-ink writing suitable for sensors/actuators and energy storage systems.     

Curing of mixtures of epoxy resins and 4‐methyl‐1,3‐dioxolan‐2‐one with several initiators

Diglycidyl ether of bisphenol A or 3,4‐epoxycyclohexylmethyl 3,4‐epoxycyclohexane carboxylate were mixed with different proportions of 4‐methyl‐1,3‐dioxolan‐2‐one and cured using lanthanide triflates as initiators. In order to compare the materials obtained, conventional initiators such as boron trifluoride complexes and N,N‐dimethylaminopyridine were also tested. The curing process was followed by differential scanning calorimetry (DSC) and Fourier transform IR in attenuated total reflectance mode. This technique proved that the carbonate accelerates the curing process because it helps to form the active initiating species, although it was not chemically incorporated into the network and remained entrapped in the material. The DSC kinetic study was also reported. © 2006 Wiley Periodicals Inc. J Appl Polym Sci 102: 2086–2093, 2006     

Carbonaceous adsorbents from sewage sludge and their application in a combined activated sludge-powdered activated carbon (AS-PAC) treatment

In this study, waste biological sludge is converted to an adsorbent by chemical activation with sulphuric acid. The adsorbent obtained is then applied to the aerated vessel of an activated sludge process treating glucose and phenol to improve the quality of the treated effluent. The sludge-based carbonaceous adsorbent was found to be mesoporous in nature, with a good adsorption capacity for large molecular weight compounds and limited removal efficiency for smaller molecules such as phenol. The addition of carbon, either sludge-based or commercial, enhanced phenol removal from 58% to 98.7% and from 87% to 93% the organic matter removal as measured by the chemical oxygen demand (COD) when operated with feed concentrations of 100 mg phenol/l and 2500 mg COD/l. No differences were found between the activated sludge-activated carbon bench scale continuous reactors operating with either commercial or sludge-based adsorbents in spite of the higher adsorption capacity of the former. It is suggested that powdered adsorbent bioregeneration in the combined AS-PAC system may be impaired by the obstruction of pores due to bacterial growth, the effect being more important for the commercial activated carbon with a narrower pore size distribution.     

New thermosets obtained by cationic copolymerization of DGEBA with γ‐caprolactone with improvement in the shrinkage. II. Time–temperature–transformation (TTT) cure diagram

Mixtures of diglycidylether of bisphenol A (DGEBA) with different proportions of γ‐caprolactone (γ‐CL) were cured with ytterbium triflate as initiator. The curing was studied with differential scanning calorimetry (DSC) and thermo mechanical analysis (TMA). The results are presented in the form of a time–temperature–transformation diagram. The kinetic analysis was performed by means of the isoconversional integral procedure and the kinetic model was also determined using the Coats–Redfern method. Gelation was determined by means of combined experiences of DSC and TMA. The relationship between the glass transition temperature (T_g) and the degree of conversion α was determined by DSC. Using the isoconversional lines and the T_g‐α relationship, the vitrificacion curve was obtained. The methodology developed makes it possible to obtain the TTT diagram using only no‐isothermal experiments with equivalent results to those using classical isothermal procedures. The addition of γ‐CL accelerates the curing and reduces the shrinkage after gelation and consequently the internal stresses in the material. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2007     

Online light scattering measurements: A method to assess morphology development of polymer blends in a twin‐screw extruder

Light scattering has proved itself an efficient technique to determine particle diameters in heterogeneous dilute dispersions in the micrometer range. Extrusion of polymer blends is expected to give rise to very small particles, typically in the range from hundreds of nanometers to tens of micrometers. A light scattering device developed in our laboratory has been used to study the morphology of polymer blends obtained in a twin‐screw extruder. The main advantage of this technique is the immediate response obtained without any surface or interface modification that can occur during the sample preparation by using more conventional techniques like electron microscopy. To show the possible applications of this light scattering device, preliminary tests have been carried out. First, we present a comparison between experimental measurements and theoretical results for dilute systems. Second, we have investigated the effect of shear flow on the droplet deformation. Finally, we have studied the variations of the light scattering pattern for a reactive blend.     

3D Surface Reconstruction of Noisy Point Clouds Using Growing Neural Gas: 3D Object/Scene Reconstruction

With the advent of low-cost 3D sensors and 3D printers, scene and object 3D surface reconstruction has become an important research topic in the last years. In this work, we propose an automatic (unsupervised) method for 3D surface reconstruction from raw unorganized point clouds acquired using low-cost 3D sensors. We have modified the growing neural gas network, which is a suitable model because of its flexibility, rapid adaptation and excellent quality of representation, to perform 3D surface reconstruction of different real-world objects and scenes. Some improvements have been made on the original algorithm considering colour and surface normal information of input data during the learning stage and creating complete triangular meshes instead of basic wire-frame representations. The proposed method is able to successfully create 3D faces online, whereas existing 3D reconstruction methods based on self-organizing maps required post-processing steps to close gaps and holes produced during the 3D reconstruction process. A set of quantitative and qualitative experiments were carried out to validate the proposed method. The method has been implemented and tested on real data, and has been found to be effective at reconstructing noisy point clouds obtained using low-cost 3D sensors.     

Extending the power of datalog recursion

Supporting aggregates in recursive logic rules represents a very important problem for Datalog. To solve this problem, we propose a simple extension, called Datalog $^{FS}\,$ (Datalog extended with frequency support goals), that supports queries and reasoning about the number of distinct variable assignments satisfying given goals, or conjunctions of goals, in rules. This monotonic extension greatly enhances the power of Datalog, while preserving (i) its declarative semantics and  (ii) its amenability to efficient implementation via differential fixpoint and other optimization techniques presented in the paper. Thus, Datalog $^{FS}\,$ enables the efficient formulation of queries that could not be expressed efficiently or could not be expressed at all in Datalog with stratified negation and aggregates. In fact, using a generalized notion of multiplicity called frequency, we show that diffusion models and page rank computations can be easily expressed and efficiently implemented using Datalog $^{FS}\,$ .     

Simultaneous domestic wastewater treatment and renewable energy production using microbial fuel cells (MFCs)

Microbial fuel cells (MFCS) can be used in wastewater treatment and to simultaneously produce electricity (renewable energy). MFC technology has already been applied successfully in lab-scale studies to treat domestic wastewater, focussing on organic matter removal and energy production. However, domestic wastewater also contains nitrogen that needs to be treated before being discharged. The goal of this paper is to assess simultaneous domestic wastewater treatment and energy production using an air-cathode MFC, paying special attention to nitrogen compound transformations. An air-cathode MFC was designed and run treating 1.39 L d(-1) of wastewater with an organic load rate of 7.2 kg COD m(-3) d(-1) (80% removal efficiency) and producing 1.42 W m(-3). In terms of nitrogen transformations, the study demonstrates that two different processes took place in the MFC: physical-chemical and biological. Nitrogen loss was observed increasing in line with the power produced. A low level of oxygen was present in the anodic compartment, and ammonium was oxidised to nitrite and nitrate.     

A case of split notochord syndrome: presence of dorsal enteric diverticulum adjacent to the dorsal enteric fistula

Like umblical enteric remnants (eg, umblical sinus and omphalomesenteric fistula), enteric remnants can be seen on the dorsal aspect of the body (dorsal enteric sinus, dorsal enteric fistula IDEF], dorsal enteric diverticulum) in conjunction with complete cleft of the vertebral column. Complete cleft of the vertebral column associated with gastrointestinal tract and central nervous system anomalies is known as "split notochord syndrome" (SNS). The authors present an unreported variant of SNS having dorsal enteric diverticulum adjacent to the DEF. The patient died 17 days after surgical repair.