Angiosarcoma (angioendothelioma) of the scalp. An unusual case of scarring alopecia

Angiosarcoma with initial involvement of the scalp is a rare, malignant neoplasm. We present the case of a 77-year-old woman in whom extensive scarring alopecia developed that was proved histologically to be due to angiosarcoma. She had a good initial response to treatment with electron-beam therapy, but after seven months, extensive nodules and indurated areas on the face beyond the borders of the radiation field developed. Subsequently, massive cervical adenopathy and metastases to the lungs, liver, and spleen developed. Angiosarcoma must be differentiated from other malignant blood vessel tumors and should be considered in the differential diagnosis of scarring alopecia of the scalp in elderly patients.     

Scheduling flowshops with condition-based maintenance constraint to minimize expected makespan

Flexible job-shop scheduling problem (FJSP) is an extended traditional job-shop scheduling problem, which more approximates to practical scheduling problems. This paper presents a multi-objective genetic algorithm (MOGA) based on immune and entropy principle to solve the multi-objective FJSP. In this improved MOGA, the fitness scheme based on Pareto-optimality is applied, and the immune and entropy principle is used to keep the diversity of individuals and overcome the problem of premature convergence. Efficient crossover and mutation operators are proposed to adapt to the special chromosome structure. The proposed algorithm is evaluated on some representative instances, and the comparison with other approaches in the latest papers validates the effectiveness of the proposed algorithm.     

A parameter-tuned genetic algorithm to solve multi-product economic production quantity model with defective items, rework, and constrained space

The economic production quantity (EPQ) model is often used in manufacturing environments to assist firms in determining the optimal production lot size that minimizes the overall production–inventory costs. While there are some unrealistic assumptions in the EPQ model that limit its real-world applications, in this research, some of these assumptions such as (1) infinite availability of warehouse space, (2) all of the produced items being perfect, and (3) the existence of one product type are relaxed. In other words, we develop a multi-product EPQ model in which there are some imperfect items of different product types being produced such that reworks are allowed and that there is a warehouse space limitation. Under these conditions, we formulate the problem as a nonlinear integer-programming model and propose a genetic algorithm to solve it. At the end, a numerical example is presented to identify the optimal values of the genetic algorithm parameters and to illustrate the applications of the proposed methodology to more realistic real-world problems.     

Economic and economic-statistical designs of MEWMA control charts—a hybrid Taguchi loss, Markov chain, and genetic algorithm approach

Economic design of multivariate exponentially weighted moving average (MEWMA) control charts for monitoring the process mean vector involves determining economically the optimum values of the three control parameters: the sample size, the sampling interval between successive samples, and the control limits or the critical region of the chart. In the economic-statistical design, constraints (including the requirements of type I error probability and power) are added such that the statistical property of the chart is satisfied. In this paper, using the multivariate Taguchi loss approach, the Lorenzen–Vance (Technometrics 28:3-10, 1) cost function of implementing the control chart is extended to include intangible external costs along with the in-control average run length (ARL₀) and out-of-control average run length (ARL₁) as statistical constraints. A Markov chain model is then developed to estimate the ARLs and a genetic algorithm whose parameters are optimally obtained by design of experiments is used to solve the model and estimate the optimum values of the control chart parameters. A numerical example and a sensitivity analysis are provided to illustrate the solution procedure and to investigate the effects of cost parameters on the optimal designs. The results show that the proposed economic-statistical design of the chart has better statistical properties in comparison to the economic design while the difference between the costs is negligible.     

Precision control of a piezo-actuated micro telemanipulation system

Piezoelectric actuators are widely used in micro manipulation applications. However hysteresis nonlinearity limits accuracy of these actuators. This paper presents a novel approach for utilizing a piezoelectric nano-stage as slave manipulator of a teleoperation system. The Prandtl-Ishlinskii (PI) model is used to model actuator hysteresis in feedforward scheme to cancel out this nonlinearity. To deal with the influence of parametric uncertainties, unmodeled dynamics, and PI identification error a perturbation term is added to the slave model and apply a sliding mode based impedance control with perturbation estimation. The stability of the entire system is guaranteed by Llewellyn’s absolute stability criterion. Performance of the proposed controllers is verified through experiments.     

Structure and properties of MDO stretched polypropylene

Two polypropylene cast films of different crystalline structures (one with coexisting small rows of lamellae and spherulites and the other with only a spherulitic structure) were prepared by extrusion. The produced cast films were uniaxially hot drawn at T = 120 °C using a machine direction orientation (MDO) unit and the changes in structure and morphology were examined and related to barrier as well as tear and puncture properties. Structural changes in terms of the degree of crystallinity and crystal size distribution, orientation of the amorphous and crystalline phases, and the deformation behavior at the crystal lattice and lamellae scales were investigated using differential scanning calorimetry (DSC), Fourier transform infrared spectroscopy (FTIR), wide angle X-ray diffraction (WAXD), and small angle X-ray scattering (SAXS), respectively. A significant effect of the original crystal morphology on the alignment of the amorphous and crystalline phases was observed from FTIR and WAXD. The results also revealed that the deformation behavior of the crystal structure was dependent on the draw ratio (DR). Our findings showed that by increasing DR the crystal lamellae first broke up and oriented along the drawing direction and then, at large DR, they were deformed and created a fibrillar structure. Morphological pictograms illustrating the effects of original morphology and draw ratio on the stretched film microstructure are proposed. The tear resistance along the machine direction (MD) decreased significantly with increasing DR whereas the puncture resistance increased drastically. Finally, the oxygen transmission rate (OTR) of the MDO stretched films could be correlated with the orientation parameters as well as the β-relaxation peak magnitude of the amorphous tie chains.     

The effect of microencapsulation with nitrocellulose on thermal properties of sodium azide particles

Based on the coacervation principle a solvent/non-solvent method has been used for microencapsulation of sodium azide (NaN₃) with fibrous nitrocellulose (NC). Scanning electron microscopy (SEM) was employed to examine the coating morphology. The thermal behavior of solid samples has been studied by means of thermogravimetry (TG) and differential scanning calorimetry (DSC). The results of TG–DTA analysis revealed that the main thermal degradation for the pure NC and NaN₃ occurs in the temperature ranges of 192–220 and 415–420 °C, respectively. The effects of some parameters, such as NC to NaN₃ weight ratio and volume and addition time of non-solvent, on coating quality and thermal properties have been investigated by SEM and thermal methods. The results of these experiments showed that the decomposition temperature of most stabilized coated sodium azide is about 50 °C higher than that of the pure sample. The DSC experiments were conducted to study the influence of the heating rate (5, 10, 15 and 20 °C/min) on the thermal decomposition processes of the pure NC, coated and pure NaN₃ samples. The results revealed that, as the heating rate was increased, decomposition temperature of the compounds was increased. Also, the kinetic parameters such as activation energy and frequency factor of the decomposition processes were obtained from the DSC data by non-isothermal methods proposed by ASTM E696 and Ozawa. Our finding showed that coated NaN₃ has lower decomposition rate with respect to the pure one.     

Rheological and thermal properties of blends of a long-chain branched polypropylene and different linear polypropylenes

Blends of a long-chain branched polypropylene (LCB-PP) and four linear polypropylenes (L-PP) having different molecular weights were prepared using a twin screw extruder. The linear viscoelastic properties suggested the immiscibility of the high molecular weight L-PP based blends, and the miscibility of the low molecular weight L-PP based blends. In addition, the Palierne emulsion model showed good predictions of the linear viscoelastic properties for both miscible and immiscible PP blends. However, as expected, the low-frequency results showed a clear effect of the interfacial tension on the elastic modulus of the blends for the high molecular weight L-PP based blends. A successful application of time-temperature superposition (TTS) was found for the blends and neat components. Uniaxial elongational properties were obtained using a SER unit mounted on an ARES rheometer. A significant strain hardening was observed for the neat LCB-PP as well as for all the blends. The influence of adding LCB-PP on the crystallinity, crystallization temperature, melting point, and rate of crystallization were studied using differential scanning calorimetry (DSC). It was found that the melting point and degree of crystallinity of the blends first increased by adding up to 20 wt% of the branched component but decreased by further addition. Adding a small amount of LCB-PP caused significant increase of the crystallization temperature while no dramatic changes were observed for blends containing 10 wt% LCB-PP and more. Furthermore, the crystalline morphology during and after crystallization of the various samples was monitored using polarized optical microscopy (POM). Compared to the neat linear polymers, finer and numerous spherulites were observed for the blends and LCB-PP. Dynamic mechanical (DMA) data of the blends and pure components were also analyzed and positive deviations from the Fox equation for the glass transition temperature, T_g, were observed for the blends.     

Techno-economic evaluation of advanced IGCC lignite coal fuelled power plants with CO2 capture

The techno-economic evaluation of four novel integrated gasification combined cycle (IGCC) power plants fuelled with low rank lignite coal with CO₂ capture facility has been investigated using ECLIPSE process simulator. The performance of the proposed plants was compared with two conventional IGCC plants with and without CO₂ capture. The proposed plants include an advanced CO₂ capturing process based on the Absorption Enhanced Reforming (AER) reaction and the regeneration of sorbent materials avoiding the need for sulphur removal component, shift reactor and/or a high temperature gas cleaning process. The results show that the proposed CO₂ capture plants efficiencies were 18.5–21% higher than the conventional IGCC CO₂ capture plant. For the proposed plants, the CO₂ capture efficiencies were found to be within 95.8–97%. The CO₂ capture efficiency for the conventional IGCC plant was 87.7%. The specific investment costs for the proposed plants were between 1207 and 1479 €/kW_e and 1620 €/kW_e and 1134 €/kW_e for the conventional plants with and without CO₂ capture respectively. Overall the proposed IGCC plants are cleaner, more efficient and produce electricity at cheaper price than the conventional IGCC process.