UK scenario of islanded operation of active distribution networks with renewable distributed generators

This paper reports on the current UK scenario of islanded operation of active distribution networks with renewable distributed generators (RDGs). Different surveys indicate that the present scenario does not economically justify islanding operation of active distribution networks with RDGs. Anti-islanding protection schemes currently enforce the renewable distributed generators (RDGs) to disconnect immediately and stop generation for grid faults through loss of grid (LOG) protection system. This greatly reduces the benefits of RDG deployment. With rising RDG penetration, much benefit would be lost if the RDGs are not allowed to island only due to conventional operational requirement of utilities. For preventing disconnection of RDGs during LOG, several islanding operation, control and protection schemes are being developed. Technical studies clearly indicate the need to review parts of the ESQCR (Electricity Safety, Quality and Continuity Regulations) for successful islanded operations. Commercial viability of islanding operation must be assessed in relation to enhancement of power quality, system reliability and supply of potential ancillary services through network support. Demonstration projects under Registered Power Zone and Technical Architecture Projects should be initiated to investigate the usefulness of DG islanding. However these efforts should be compounded with a realistic judgement of the associated technical and economic issues for the development of future power networks.     

Studies of microstructural imperfections of powdered Zirconium-based alloys

Different model based approaches of X-ray diffraction line profile analysis have been applied on the heavily deformed zirconium-based alloys in the powdered form to characterize the microstructural parameters like domain size, microstrain and dislocation density. In characterizing the microstructure of the material, these methods are complimentary to each other. Though the parameters obtained by different techniques are differently defined and thus not necessarily comparable, the values of domain size and microstrain obtained from the different techniques show similar trends.     

Radiological risk analysis of particle accelerators

Considering the growing use of high-current accelerators in medicine, industry and research, there is a need for evaluating the hazard potentials of new accelerator systems from the design stage itself. The present paper discusses the factors taken care of in a radiological safety analysis of accelerators. Possible hazards identified are beam loss, target rupture, faulty components and personnel being trapped in an active area. Human error is one of the major factors leading to accelerator hazard. How radiation dose to both occupational workers and general public is reduced and taken care of are discussed.     

Continuously phase-matched M-waveguides for second-order nonlinearupconversion

We present an analysis of an M-waveguide structure in lithium niobate that provides a new method for second-order nonlinear upconversion processes. M-waveguides can be designed to be continuously phase matched without the use of birefringence or quasi phase matching, and the output wave profile produced is single-lobed in the core region. M-waveguides provide a novel phase-matching technique and are ideal candidates for monolithically integrated circuits     

The HLA A1-B8 haplotype extends 6 Mb beyond HLA-A: associations between HLA-A, B, F and 15 microsatellite markers

Ornithodoros (Alectorobius) amblus Chamberlin 1920 specimens were collected from a seagull (Larus spp.) nest in northern Chile. This reports the occurrence of this species outside Peru. The biology of 79 specimens reared under laboratory conditions at 27 degrees C, 75-80% RH, and total darkness was determined. A 13% mortality rate from larval to adult was observed. Larval ticks were fed on chicks, Gallus gallus domesticus; and nymphs and adults were fed on chickens. We recorded the number of eggs per female per gonotrophic cycle and the mean duration of the periods of preoviposition, oviposition, and incubation. The total duration of their life cycle ranged from 111 to 239 d, depending on the number of molts. Males were found after the 4th molt, and after the 5th molt the proportion of females was greater than that of males or remaining nymphs. The feeding period of larvae was 4-6 d, N1 nymphs do not feed. The N2-N6 nymphs, males and females, had a 10- to 60-min feeding period. From N2 on, there was emission of coxal fluid while on the host and during or immediately after feeding.     

Electron‐beam‐induced crosslinking of natural rubber/acrylonitrile–butadiene rubber latex blends in the presence of ethoxylated pentaerythritol tetraacrylate used as a crosslinking promoter

A natural rubber latex, an acrylonitrile–butadiene rubber latex, and their 50: 50 blends were exposed to an electron beam in air. A polyfunctional monomer, ethoxylated pentaerythritol tetraacrylate, was used as a crosslinking promoter. Cast films from the irradiated systems were characterized for their gel contents, swelling properties, and tensile strength. An increase in the radiation dose from 0 to 500 kGy resulted in increased crosslinking, as measured by an increase in the gel content and better swelling resistance. The effect of the polyfunctional monomer, ethoxylated pentaerythritol tetraacrylate, as a crosslinking promoter was studied with infrared spectros copy. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 1206–1214, 2007     

A green chemistry approach for the synthesis and characterization of bioactive gold nanoparticles using Azolla microphylla methanol extract

This article reports the environmentally benign synthesis of gold nanoparticles （GNPs） using methanol extract of Azolla microphylla as the stabilizing and reducing agent. The GNPs were characterized by UV-vis spectrophotometry and FTIR, and the morphological characteristics were analyzed by XRD, FESEM-EDX and HRTEM. The GNPs could be formed in very short time, even in less than 30 min. The nanoparticles measured by UV-spectrophotometer demonstrated a peak at 540 nm corresponding to surface plasmon resonance spectra, and the peaks showed by FTIR suggested the presence of organic biomolecules on the surface of the GNPs. XRD results confirmed the crystalline nature of the GNPs, and FESEM-EDX and HRTEM analyses had been performed in the size ranges of 17-40nm and 1.25-17.5nm respectively. The synthesized GNPs showed excellent antioxidant activity. This study shows the feasibility of using plant sources for the biosynthesis of GNPs.     

Effective mechanical properties of hexagonal boron nitride nanosheets

We propose an analytical formulation to extract from energy equivalence principles the equivalent thickness and in-plane mechanical properties (tensile and shear rigidity, and Poisson's ratio) of hexagonal boron nitride (h-BN) nanosheets. The model developed provides not only very good agreement with existing data available in the open literature from experimental, density functional theory (DFT) and molecular dynamics (MD) simulations, but also highlights the specific deformation mechanisms existing in boron nitride sheets, and their difference with carbon-based graphitic systems.