Studies of microhardness and mar resistance using a scanning probe microscope

Scanning probe microscopy (SPM) is in a period of rapid development. It shows great promise for characterizing coating surfaces. This paper describes modification of an SPM so that it can be used to mar the surfaces of coatings under controlled conditions and to characterize the mars. Mar resistance of coatings is analyzed in terms of a ‘three response, two mechanism model.' The three responses (fracture, elastic, and plastic) can be measured quantitatively using the SPM. Of the three responses, only two (fracture and plastic deformation) are marring mechanisms – elastic deformations recover instantaneously. In some cases mars resulting from plastic deformation may recover slowly with time or with immersion in water; this phenomenon is attributed to viscoelastic creep. Microhardness is also measured with the modified SPM. Some thermoset coatings appear to be substantially harder near their surfaces than in the mass of material, and such materials may respond quite differently to stress applied at different levels near the surface. This finding has important implications for all coating properties that are strongly influenced by the surface. A quantity called ‘micro mar resistance' is defined. It may be useful for comparing different coatings under specified conditions of marring. However, there can be no single quantity that expresses ‘mar resistance' of a coating under all conditions.     

加压下二氧化碳在二甲基甲酰胺中的溶解度研究

本文报道了二氧化碳在二甲基甲酰胺中的溶解度,实验温度分别为15、20、25、30、35、40、45℃,实验压力为207.21—1684.02kPa.并且提出一个考虑了过量熵的、用溶度参数表示的活度系数方程.     

浅谈C语言中循环结构的教学--回答好循环结构的“三个问题”

循环结构是C语言程序设计中的重难点,其掌握情况对于后续章节的学习效果尤为关键。本文以什么是循环、何时需要使用循环以及如何使用循环三个问题为主线,通过精心选择的教学案例和灵活有效的教学方法来进行解答,以激发学生兴趣,培养编程思想。     

淤浆鼓泡床中固体粒子的悬浮特性

研究了三相鼓泡床中的临界固含率,以空气作气相,水、乙醇-水、丙酮-水、萜松醇-二甲苯作液相,石英砂、煤、雷奈镍作为固相。分析了鼓泡柱的高径比、气体速度、固体粒子的大小和比重、液体的粘度对临界固含率的影响,提出了含有这些参数的无因次数群的关联式,讨论了本文提出的关联式和文献报导的差别。     

游戏产品有效粘合用户时间的策略研究

通过对游戏的分类、发展历程梳理以及用户的需求分析,结合游戏产生过程给出了游戏产品有效粘合用户时间的策略,最后预测了游戏的发展趋势。     

关于控制氯代烃的政策选择

本文分析了氯代烃的生产所引起的环境问题,并提出了减少氯代烃环境影响的政策选择的基本原则。     

A recognition method of vibration parameter image based on improved immune negative selection algorithm for rotating machinery

To overcome the limitations of traditional monitoring methods, based on vibration parameter image of rotating machinery, this paper presents an abnormality online monitoring method suitable for rotating machinery using the negative selection mechanism of biology immune system. This method uses techniques of biology clone and learning mechanism to improve the negative selection algorithm to generate detectors possessing different monitoring radius, covers the abnormality space effectively, and avoids such problems as the low efficiency of generating detectors, etc. The result of an example applying the presented monitoring method shows that this method can solve the difficulty of obtaining fault samples preferably and extract the turbine state character effectively, it also can detect abnormality by causing various fault of the turbine and obtain the degree of abnormality accurately. The exact monitoring precision of abnormality indicates that this method is feasible and has better on-line quality, accuracy and robustness.     

Research on the friction and wear mechanism of Poly(vinyl alcohol)/hydroxylapatite composite hydrogel

Poly(vinyl alcohol)/Hydroxylapatite (PVA/HA) composite hydrogel was prepared with poly(vinyl alcohol) and hydroxylapatite as raw materials, using the method of repeated freezing and thawing. The morphologies of PVA/HA composite hydrogel were observed by means of high-accuracy 3D profiler and scanning electron microscope (SEM). The compressive elastic modulus and the stress relaxation characteristics of PVA/HA composite hydrogel were measured using the flat-head cylinder indenter. The friction and wear tests between PVA/HA composite hydrogel and bovine knee articular cartilage were performed on the micro-tribometer. The worn morphologies of PVA/HA composite hydrogel were observed with environmental scanning electron microscope (ESEM). The results showed that PVA/HA composite hydrogel has the cross-link network microstructure which is similar to that of the natural bovine knee articular cartilages. With the increase of freezing-thawing cycles and the HA content, the degree of cross-link and the crystallization of PVA/HA composite hydrogel both increase, the elastic modulus increases evidently, the rate of stress relaxation is improved and the value of balance stress decreases. The friction coefficient decreases with the increase of the freezing-thawing cycles and the HA content. The more the freezing-thawing cycles are, the earlier the friction coefficient reaches the stable balance value. The friction deformation depth between PVA/HA composite hydrogel and bovine knee articular cartilage is inversely proportional to freezing-thawing cycles and the HA content. The main wear mechanisms of PVA/HA composite hydrogel are plastic flowing and adhesive flaking. The wear severity degree decreases with the increase of freezing-thawing cycles and the HA content. Supported by Key Program of the National Natural Science Foundation of China (Grant No. 50535050), Program for New Century Excellent Talents in University (Grant No. NCET-06-0479) and Natural Science Foundation of Jiangsu Province (Grant No. BK2005403)     

Synthesis and photoconductivity study of phthalocyanine polymers. I. PAA–CuPc(NO2)2

Cu–dinitro–diamino phthalocyanine was synthesized and converted to the diazonium salt. Polyacrylamide bonded CuPc(NO₂)₂ [PAA–CuPc(NO₂)₂] (I) was synthesized by hot polymerization of acrylamide and this diazonium salt. Polymer(I) is water soluble and contains about 7 mol % CuPc(NO₂)₂ rings, which are covalently bonded to PAA. Polymer(I) shows good photoconductivity, which is much better than that of the corresponding phthalocyanine monomers. By doping with iodine (I₂), the photosensitivity of polymer(I) is increased, which through fluorescence analysis is explained by the fact that a charge–transfer complex (CTC) of polymer(I) with I₂ is formed. The influence of interface layer (IFL) and charge–transportation material (CTM) on the photoconductivity of polymer(I) were also studied.     

层间接触状态和横向力大小对车辙贡献率的影响

车辙贡献率是反映沥青路面各结构层车辙病害程度的一个主要参数,可用于指导沥青路面的设计和施工.利用三维有限元计算软件建立三维有限元模型用于理论分析,将有限元计算结果与理论解进行对比,验证了该三维有限元模型的可靠性.采用实测的轮胎接地压力,考虑不同层间接触状态和横向力大小,结合有限元计算的数据,分析了沥青路面结构层的车辙贡献率.结果表明:在层间完全连续状态下,横向力大小的选取不能简单地选取最大垂直轮胎接地压力的一定比例,而是要根据所研究的具体情况具体分析.在对沥青路面车辙贡献率的研究中,可以忽略层间接触状态,即假定层间完全连续.