The effect of sowing date and growth stage on the essential oil composition of three types of parsley (Petroselinum crispum)

Essential oils obtained by simultaneous distillation–extraction (SDE) from leaves, petioles and roots of three types of parsley (turnip‐rooted, plain leaf and curly leaf type), sown on three different dates, were analysed by GC‐MS (gas chromatography–mass spectrometry) analysis. Parsley plants were found to produce mainly β‐phellandrene, 1,3,8‐p‐menthatriene, α‐,p‐dimethylstyrene, myristicin, β‐myrcene and apiole. In some cases α‐ and β‐pinene were also found, whereas β‐elemene was detected, especially in the curly leaf type. The growth stage, plant tissue and date of sowing, as well as the climate conditions, all had a significant effect on the essential oil composition by altering the ratio of the above substances. Copyright © 2004 Society of Chemical Industry     

Prevention of the influence of fibrin and alpha2-macroglobulin in the continuous measurement of the thrombin potential: implications for an endpoint determination of the optical density

We proposed the endogenous thrombin potential (ETP) as an overall function test of the coagulation system. We recently introduced a routine test which requires defibrinated plasma. In order to develop an assay in which the ETP-value can be directly obtained by measuring the optical density, we investigated two methods to inhibit fibrinogen clottability and to inactivate alpha2-macroglobulin. The first method makes use of hydroxylamine to inactivate alpha2-macroglobulin and H-Gly-Pro-Arg-Pro-OH to inhibit fibrin polymerization. At pH 7.35, plasma incubated with 25 mM hydroxylamine and 1.5 mg/mL H-Gly-Pro-Arg-Pro-OH for 5 minutes at 37 degrees C resulted in a reduced endlevel of the amidolytic activity on small chromogenic substrates. The second method uses a metalloprotease purified from Crotalus basiliscus to remove alpha2-macroglobulin from plasma in combination with H-Gly-Pro-Arg-Pro-OH. Herein plasma is incubated with 3.5 LM protease during 15 minutes at 37 degrees C in the presence of 1 mg/mL polymerization inhibitor. The enzymatic method results in a zero endlevel of the amidolytic activity and this would imply that measurement of the ETP is reduced to an endpoint determination of the optical density. We show that the endpoint determination of the optical density correlates well with the calculated ETP in plasmas with different degrees of anticoagulation.     

Altering the association properties of insulin by amino acid replacement

The importance of Pro^B28 and Lys^B29 on the self-associationof insulin was established by systematically truncating theC terminus of the B chain. The relationship between structureand association was further explored by making numerous aminoacid replacements at B²⁸ and B²⁹ Association was studied bycircular dichroism, size-exclusion chromatography and ultracentrifugation.Our results show that the location of a prolyl residue at B²⁸is critical for high-affinity self-association. Removal of Pro^B28in a series of C-terminal truncated insulins, or amino acidreplacement of Pro²⁸, greatly reduced association. The largestdisruption to association was achieved by replacing Lys^B29 withPro and varying the amino acid at B²⁸ Several of the analogswere predominantly monomers in solutions up to 3 mg/ml. Theseamino acid substitutions decreased association by primarilydisrupting the formation of dimers. Such amino acid substitutionsalso substantially reduced the Zn-induced insulin hexamer formation.The formation of monomeric insulins through amino acid replacementswas accompanied by conformational changes that may be the causefor decreased association. It is demonstrated that self-associationof insulin can be drastically altered by substitution of oneor two key amino acids.     

Thermal and flammability properties of a silica–poly(methylmethacrylate) nanocomposite

PMMA, poly(metheylmethacrylate), nanocomposites were made by in situ radical polymerization of MMA, methylmethacrylate, with colloidal silica (ca. 12 nm) to study the effects of nanoscale silica particles on the physical properties and flammability properties of PMMA. Transparent samples resulted and the dispersity of the particles was examined by transmission electron microscopy and atomic force microscopy. The addition of nanosilica particles (13% by mass) did not significantly change the thermal stability, but it made a small improvement in modulus, and it reduced the peak heat release rate roughly 50%. Last, the flame‐retardant mechanism provided by the addition of nanosilica particles in PMMA is discussed. Published 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 2072–2078, 2003     

Polyaniline‐modified cellulose nanofibrils as reinforcement of a smart polyurethane

Segmented polyurethanes exhibiting shape memory properties were modified by the addition of polyaniline (PANI)‐coated cellulose nanofibrils (CNFs). The two‐phase structure of the polymer is responsible for the material's ability to ‘remember’ and autonomously recover its original shape after being deformed in response to an external thermal stimulus. PANI was grown on the surface of the CNFs via in situ polymerization. Modified nanocrystals were added to the segmented polyurethane in concentrations ranging from 0 to 15 wt%. The changes in the material properties associated with the percolation of the coated fibrils appear at higher concentrations than previously observed for non‐modified CNFs, which suggests that fibril agglomeration is occurring due to the PANI coating. The shape memory behavior of the composites is maintained at about the same level as that of the unfilled polyurethane only up to 4 wt% of fibrils. At higher concentrations, the rigidity of the nanofibrils as well as their interaction with the hard‐segment phase and the increasing difficulty of dispersing them in the polymer collaborate to produce early breakage of the specimens when stretched at temperatures above the melting point of the soft segments. Copyright © 2010 Society of Chemical Industry     

Platelet Inhibition Prevents NLRP3 Inflammasome Activation and Sepsis-Induced Kidney Injury

Platelets, cellular mediators of thrombosis, are activated during sepsis and are increasingly recognized as mediators of the immune response. Platelet activation is significantly increased in sepsis patients compared to ICU control patients. Despite this correlation, the role of activated platelets in contributing to sepsis pathophysiology remains unclear. We previously demonstrated NOD-like receptor protein 3 inflammasome (NLRP3) inflammasome activation in sepsis-induced platelets from cecal-ligation puncture (CLP) rats. Activated platelets were associated with increased pulmonary edema and glomerular injury in CLP vs. SHAM controls. In this study, we investigated whether inhibition of platelet activation would attenuate NLRP3 activation and renal and pulmonary injury in response to CLP. CLP was performed in male and female Sprague Dawley (SD) rats (n = 10/group) to induce abdominal sepsis and SHAM rats served as controls. A subset of CLP animals was treated with Clopidogrel (10 mg/kg/day, CLP + CLOP) to inhibit platelet activation. At 72 h post-CLP, platelet activation and NLRP3 inflammasome assembly were evaluated, IL-1β and IL-18 were measured in plasma, and tissues, renal and pulmonary pathology, and renal function were assessed. Activated platelets were 7.8 ± 3.6% in Sham, 22 ± 6% in CLP and significantly decreased to 14.5 ± 0.6% in CLP + CLOP (n = 8–10/group, p < 0.05). NLRP3 inflammasome assembly was inhibited in platelets of CLP + CLOP animals vs. CLP. Significant increases in plasma and kidney IL-1β and IL-18 in response to CLP were decreased with Clopidogrel treatment. Renal injury, but not lung histology or renal function was improved in CLP + CLOP vs. CLP. These data provide evidence that activated platelets may contribute to sepsis-induced renal injury, possibly via NLRP3 activation in platelets. Platelets may be a therapeutic target to decrease renal injury in septic patients.     

Reduced‐scale test to assess the effect of fire barriers on the flaming combustion of cored composites: An upholstery‐material case study

Herein, we describe a reduced‐scale test (“Cube” test), measuring the fire performance of specimens including a fire barrier (FB) and a flammable core material, which acts as the main fuel load. The specimen is intended to reproduce a cross‐section of a composite product where heat/mass transfer occurs primarily in a direction perpendicular to the FB. The Cube test procedure and benefits are discussed in this work by adopting residential upholstery furniture as an exemplary study. One flexible polyurethane foam, one polypropylene cover fabric, and 10 commercially available FBs were selected. They were used to compare the fire performance of FBs, measured in terms of peak of heat release rate, in the ASTM E1474‐14 standard test and the newly developed Cube test. Edge effects severely affected the performance of FBs in the ASTM E1474‐14 standard test but not in the Cube test. Furthermore, appropriate test conditions were determined in the Cube test to measure the so‐called “wetting point,” that is, the time and value of heat release rate measured when flammable liquid products were first observed on the bottom of the specimen. The relevance of the “wetting point” in terms of full‐scale fire performance and failure mechanism of FBs is discussed.     

Primary care physicians' willingness to offer a new genetic test to tailor smoking treatment, according to test characteristics

Emerging pharmacogenetics research may improve clinical outcomes for common complex conditions typically treated in primary care settings. Physicians' willingness to offer genetically-tailored treatments to their patients will be critical to realizing this potential. According to recent research, it is likely that genotypes used to tailor smoking will have pleiotropic associations with other addictions and diseases, and may have different frequencies across populations. These additional features may pose an additional barrier to adoption. To assess physicians' willingness to offer a new test to individually tailor smoking treatment according to specific test characteristics, we conducted a national mailed survey of 2,000 U.S. primary care physicians (response rate: 62.3%). Physicians responded to a baseline scenario describing a new test to tailor smoking treatment, and three additional scenarios describing specific test characteristics based on published research; there was random assignment to one of two survey conditions in which the test was described as a genetic or non-genetic test. Our findings indicate physicians' self-reported likelihood (0-100 scale) that they would offer a new test to tailor smoking cessation treatment ranged from 69%-78% across all scenarios. Relative to baseline scenario responses, physicians were significantly less likely to offer the test when informed that the same genotypes assessed for treatment tailoring: (1) may also identify individuals predisposed to become addicted to nicotine (p<.001), (2) differ in frequency by race (p<.004), and (3) may have associations with other conditions (e.g., alcohol and cocaine addiction, attention deficit hyperactivity disorder ADHD and Tourette Syndrome) (p<.01). Describing a new test to individually tailor smoking treatment as a "genetic" versus non-genetic test significantly reduced physicians' likelihood of offering the test across all scenarios, regardless of specific test characteristics (p<.0007). Effective education of primary care physicians will be critical to successful integration of promising new pharmacogenetic treatment strategies for smoking.     

Determining loss characteristics of arid zone river waterbodies

Understanding the retention time of water in waterbodies during periods of no surface flow in dryland rivers provides an important context for evaluating the ecological importance of a waterhole to the river system. Time series of water level data were collected from 10 waterbodies spread across three river systems of the Lake Eyre Basin (LBE), Australia. Observed loss rates in the absence of surface flow were compared to modelled evaporation rates in order to determine whether open water evaporation was the main loss process from isolated waterholes and to what extent there is evidence of interaction between the surface water and any shallow groundwater aquifers. The modelled evaporation rates were determined using the Penman combination equation and meteorological data from the closest climate station in the region of the waterbodies. The modelled evaporation data were able to explain only some of the variability in the observed loss data but did highlight periods where other processes (including observation error) need to be invoked. These other possible processes, which include temporary groundwater connection and the effect of heat storage on the evaporation losses, probably contribute as much to the observed data variability as error introduced by the use of regional meteorological data. Assuming evaporation is the dominant process determining water loss in the absence of flow, the persistence of a waterhole is primarily dependent upon its depth when flow ceases. The annual loss shown by most waterbodies lies within the range of the modelled evaporation rate using the Penman combination equation and equates between 1.5 and 2.5 m per annum. The use of water level data in conjunction with the modelled evaporation rates was able to provide important insights into controls on waterbody loss rates and persistence. Copyright © 2007 John Wiley & Sons, Ltd.