Effective Coke Removal in Methane to Benzene (MTB) Reaction on Mo/HZSM-5 Catalyst by H2 and H2O Co-addition to Methane

The catalytic dehydro-aromatization reaction over Mo/HZSM-5 catalyst was drastically stabilized by the co-addition of 5.4% H₂ and 1.8% H₂O to methane feed at 750 °C, 0.3 MPa and methane space velocity of 3000 mL g⁻¹ h⁻¹, suppressing the coke formation effectively, compared with single hydrogen or steam addition.     

Multi-walled carbon nanotube-reinforced copper nanocomposite coating fabricated by low-pressure cold spray process

Multi-walled carbon nanotube (MWCNT)-reinforced copper (Cu) nanocomposite coatings were successfully deposited on aluminum (Al) substrate by a cold spraying process at a low pressure. The microstructure and the Raman spectrum of the low-pressure-cold-sprayed MWCNT–Cu nanocomposite coating showed that the MWCNTs maintained their tube structure in the Cu matrix, even though structural damage to the MWCNTs increased slightly. MWCNT–Cu nanocomposite-coated Al exhibits higher thermal diffusivity than pure-Cu-coated Al with a comparable hardness. The higher thermal diffusivity of the MWCNT–Cu coating could be explained by the dispersion of MWCNTs within the clean and closed CNT/Cu interfaces, which were achieved with the aid of compressive stress during the cold spraying.     

Novel Perovskite-Type Oxide Catalysts for Dehydrogenation of Ethylbenzene to Styrene

We investigated novel LaMnOx perovskite-oxide (ABO₃) catalysts for effective catalytic dehydrogenation of ethylbenzene to produce styrene monomer. Comparison with industrial Fe–K catalyst, our La_0.8Ba_0.2Mn_0.6Fe_0.4O_3-δ catalyst showed higher activity. Results show that the A-site in perovskite-type oxides affected catalytic dehydrogenation activities and that the B-site affected stability of the activities.     

Development of a novel microstructure fabrication method with co-axial dual capillary solution flow type droplet cells and electrochemical deposition

A new method for maskless fabrication of metallic patterns or structures on metals is described. A solution flow type droplet cell, with co-axial dual capillaries was applied to form fine metal structures such as strips and rods. This type of droplet cell enables movement of the cell during formation. Nickel fine patterns with a width of about 200 μm were formed on a Cu substrate. The width of the formed pattern does not change with the scanning speed of the cell, but the thickness of the formed pattern changes with the speed. Two different deposition modes were examined to form metal rods, one is a mold free deposition mode and the other is a mold assisted deposition mode. Both modes enable the formation of Ni rods, however, reproducibility of mold free deposition mode was not good. The mold assisted deposition mode has far better the reproducibility, because of the use of the inside wall of the 100 μm diameter inner tube as the mold. It is possible to form nickel micro-rods, about 100 μm in diameter and 12 mm long with relatively smooth surfaces by the mold assisted deposition mode.     

The Versatile Manipulations of Self-Assembled Proteins in Vaccine Design

Protein assemblies provide unique structural features which make them useful as carrier molecules in biomedical and chemical science. Protein assemblies can accommodate a variety of organic, inorganic and biological molecules such as small proteins and peptides and have been used in development of subunit vaccines via display parts of viral pathogens or antigens. Such subunit vaccines are much safer than traditional vaccines based on inactivated pathogens which are more likely to produce side-effects. Therefore, to tackle a pandemic and rapidly produce safer and more effective subunit vaccines based on protein assemblies, it is necessary to understand the basic structural features which drive protein self-assembly and functionalization of portions of pathogens. This review highlights recent developments and future perspectives in production of non-viral protein assemblies with essential structural features of subunit vaccines.     

One-Step Generation of Multiple Gene-Edited Pigs by Electroporation of the CRISPR/Cas9 System into Zygotes to Reduce Xenoantigen Biosynthesis

Xenoantigens cause hyperacute rejection and limit the success of interspecific xenografts. Therefore, genes involved in xenoantigen biosynthesis, such as GGTA1, CMAH, and B4GALNT2, are key targets to improve the outcomes of xenotransplantation. In this study, we introduced a CRISPR/Cas9 system simultaneously targeting GGTA1, CMAH, and B4GALNT2 into in vitro-fertilized zygotes using electroporation for the one-step generation of multiple gene-edited pigs without xenoantigens. First, we optimized the combination of guide RNAs (gRNAs) targeting GGTA1 and CMAH with respect to gene editing efficiency in zygotes, and transferred electroporated embryos with the optimized gRNAs and Cas9 into recipient gilts. Next, we optimized the Cas9 protein concentration with respect to the gene editing efficiency when GGTA1, CMAH, and B4GALNT2 were targeted simultaneously, and generated gene-edited pigs using the optimized conditions. We achieved the one-step generation of GGTA1/CMAH double-edited pigs and GGTA1/CMAH/B4GALNT2 triple-edited pigs. Immunohistological analyses demonstrated the downregulation of xenoantigens; however, these multiple gene-edited pigs were genetic mosaics that failed to knock out some xenoantigens. Although mosaicism should be resolved, the electroporation technique could become a primary method for the one-step generation of multiple gene modifications in pigs aimed at improving pig-to-human xenotransplantation.     

PPAR-Gamma Activation May Inhibit the In Vivo Degeneration of Bioprosthetic Aortic and Aortic Valve Grafts under Diabetic Conditions

Background: We aimed to examine the anti-calcification and anti-inflammatory effects of pioglitazone as a PPAR-gamma agonist on bioprosthetic-valve-bearing aortic grafts in a rat model of diabetes mellitus (DM). Methods: DM was induced in male Wistar rats by high-fat diet with an intraperitoneal streptozotocin (STZ) injection. The experimental group received additional pioglitazone, and controls received normal chow without STZ (n = 20 each group). Cryopreserved aortic donor grafts including the aortic valve were analyzed after 4 weeks and 12 weeks in vivo for analysis of calcific bioprosthetic degeneration. Results: DM led to a significant media proliferation at 4 weeks. The additional administration of pioglitazone significantly increased circulating adiponectin levels and significantly reduced media thickness at 4 and 12 weeks, respectively (p = 0.0002 and p = 0.0107, respectively). Graft media calcification was highly significantly inhibited by pioglitazone after 12 weeks (p = 0.0079). Gene-expression analysis revealed a significant reduction in relevant chondro-osteogenic markers osteopontin and RUNX-2 by pioglitazone at 4 weeks. Conclusions: Under diabetic conditions, pioglitazone leads to elevated circulating levels of adiponectin and to an inhibition of bioprosthetic graft degeneration, including lower expression of chondro-osteogenic genes, decreased media proliferation, and inhibited graft calcification in a small-animal model of DM.     

The mechanism of sequence non-specific DNA binding of HMG1/2-box B in HMG1 with DNA

The DNA binding mechanism of box B in HMG1, a member of thesequence non-specific DNA binding HMG1/2-box family of proteins,has been examined by both mutation analyses and molecular modelingtechniques. Substitution of the residue 102F, which is characteristicallyexposed to solvent, with a small hydrophobic amino acid affectedits DNA binding activity. However, no additional effect wasobserved by the further mutation of flanking 101F. Moleculardynamics simulation and modeling studies revealed that 102Fintercalates into DNA base-pairs, being supported by the flanking101F. The mutants with a small hydrophobic residue at position102 tolerated the substitution for 101F because the side chainat position 102 is too short to intercalate. Thus the intercalationof 102F and the positive effect of the flanking 101F residueare important for the sequence non-specific DNA binding of theHMG1/2-box. The conserved basic residues of 95K, 96R and 109Rwere also examined for their roles in DNA binding. These residuesinteracted with DNA mainly by electrostatic interaction andmaintained the location of the box on the DNA, which prescribedthe intercalation of 102F. The DNA intercalation by HMG1 consistsof an ingenious mechanism which brings DNA conformational changesnecessary for biological functions.     

Internal oxidation of Fe-Al alloys in the α-phase region

The internal oxidation behavior of Fe-0.069, 0.158, and 0.274 wt% Al alloys was investigated in the -phase region. The internal oxidation experiments have been made over the temperature range from 1023 to 1123 K using a mixture of iron and its oxide powders. A parabolic rate law holds in the present alloys, where the rate constant, K_p, depends upon the oxidation temperature as well as the aluminum content. The internal oxidation of Fe-Al alloys is, therefore, controlled by a diffusion process of oxygen in the alloy. The oxide formed in the oxidation layer is the stoichiometric FeAl₂O₄ (hercynite). The aluminum concentration, N _Al ^Io , in the oxidation layer was calculated by taking account of counterdiffusion of aluminum. Furthermore, the oxygen concentration, N _O ^S , at the specimen surface was evaluated on the basis of thermodynamics. Using these estimated values of K_p, N _Al ^IO , and N _O ^S , the diffusion coefficient of oxygen, D _O ^IO , in the oxidation layer, where the oxide particles were dispersed, was also calculated. D _O ^IO increases as the volume fraction of the oxide, f^IO, increases. The diffusion coefficient of oxygen, D_O, in -iron was determined by extrapolating D _O ^IO to f^IO=0.     

A Performance Comparison of Continuous and Discontinuous Finite Element Shallow Water Models

We present a comparative study of two finite element shallow water equation (SWE) models: a generalized wave continuity equation based continuous Galerkin (CG) model—an approach used by several existing SWE models—and a recently developed discontinuous Galerkin (DG) model. While DG methods are known to possess a number of favorable properties, such as local mass conservation, one commonly cited disadvantage is the larger number of degrees of freedom associated with the methods, which naturally translates into a greater computational cost compared to CG methods. However, in a series of numerical tests, we demonstrate that the DG SWE model is generally more efficient than the CG model (i) in terms of achieving a specified error level for a given computational cost and (ii) on large-scale parallel machines because of the inherently local structure of the method. Both models are verified on a series of analytic test cases and validated on a field-scale application.