The Roles of 3- and 4-Isopropylbiphenyls in the Isopropylation of Biphenyl over a H-Mordenite

The isopropylation of mixtures of 3- and 4-isopropylbiphenyls (3- and 4-IPBPs) was examined over a dealuminated H-mordenite (HM) to elucidate the role of 3- and 4-IPBPs in the isopropylation of biphenyl (BP). 4-IPBP was consumed much faster than 3-IPBP in all cases. 4-IPBP was an exclusive precursor to diisopropylbiphenyls (DIPBs), particularly 4,4-DIPB, and 4,4-DIPB was found in encapsulated products during the reaction. These results show that 4-IPBP can allow establishment of an active complex with propylene and acid site in HM pores, whereas 3-IPBP cannot. It is concluded that the isopropylation of BP over HM occurs through a reactant selectivity mechanism, and through a restricted transition state mechanism, but not through a product selectivity mechanism.     

A new optical elasticity resin for mobile LCD modules

Abstract— The display used in current cell phones has an air gap between the cover glass and the liquid‐crystal‐display (LCD) module to prevent the LCD glass from being damaged. Reflections at the boundaries of the air gap cause a reduction in the LCD luminance and contrast. To address this problem, a newly proposed LCD structure has been investigated. The “Super View Resin (SVR),” a transparent elastic resin which improves the shock resistance and visibility of the LCD, has been developed. Filling the air gap between the cover glass and LCD module with a refractive‐index‐matching resin solves the light‐reflection problem inherent in the use of a reinforced cover‐glass lens. Moreover, the elastic filler works as a damper, reducing any external shock, which prevents not only the cover glass and LCD module from being damaged, but also the glass from being shattered when it is broken.     

Virtual segment: Store–carry–forward relay-based support for wide-area non-real-time data exchange

We have proposed the concept of the virtual segment (VS), in which a global communication service is provided by combining a store–carry–forward scheme using vehicles with broadband wireless/wired network infrastructures along roads connected to the Internet. The VS can be a practical framework for non-real-time, asynchronous message transfer (especially for large messages) in a cost-effective manner. In this study, a critical implementation design issue, the message forward scheduling, in the VS approach is discussed and investigated through computer simulation by our developed VS simulator that has reflected the results of the field experiment for realistic performance evaluation.     

Replica Exchange Light Transport

We solve the light transport problem by introducing a novel unbiased Monte Carlo algorithm called replica exchange light transport, inspired by the replica exchange Monte Carlo method in the fields of computational physics and statistical information processing. The replica exchange Monte Carlo method is a sampling technique whose operation resembles simulated annealing in optimization algorithms using a set of sampling distributions. We apply it to the solution of light transport integration by extending the probability density function of an integrand of the integration to a set of distributions. That set of distributions is composed of combinations of the path densities of different path generation types: uniform distributions in the integral domain, explicit and implicit paths in light (particle/photon) tracing, indirect paths in bidirectional path tracing, explicit and implicit paths in path tracing, and implicit caustics paths seen through specular surfaces including the delta function in path tracing. The replica‐exchange light transport algorithm generates a sequence of path samples from each distribution and samples the simultaneous distribution of those distributions as a stationary distribution by using the Markov chain Monte Carlo method. Then the algorithm combines the obtained path samples from each distribution using multiple importance sampling. We compare the images generated with our algorithm to those generated with bidirectional path tracing and Metropolis light transport based on the primary sample space. Our proposing algorithm has better convergence property than bidirectional path tracing and the Metropolis light transport, and it is easy to implement by extending the Metropolis light transport.     

Metallurgical and tribological investigations of aluminium bronze bushes made by a novel centrifugal casting technique

Aluminium bronzes have been used as high strength, corrosion and wear resistance alloys for many decades. However, the alloy has a narrow solidification range and a complex nature which has confined its use to a limited field of applications. Published data on the wear characteristics and the metallurgical nature of the alloy system is limited, leaving wide possibilities for research. In the work described in this paper a study has been made of the metallurgical and tribological characteristics of aluminium bronzes conforming to BS 1400 AB2 specification. A novel centrifugal casting technique using a bonded sand lining integrated into a standard rotating die was adapted to cast a series of test bushes. Mechanical and microscopic aspects are studied and an attempt is made to correlate the physical properties with the tribological behaviour of the bushes. The results show that the test behaviour of the test bush was in some respects better than that of commercially produced bushes made by forging techniques. Detrimental embrittlement, due to ‘self annealing’ is significantly reduced by the adoption of the novel centrifugal casting technique referred to above.     

Characteristics of the Arc Voltage of a High‐Current Air Arc in a Sealed Chamber

The effect of the arc voltage on various factors of design and control was investigated for high currents in order to develop design guidelines for circuit breakers. In this study, the dependence on such factors, namely, the current, arc length, electrode surface area, and internal pressure of the arc voltage, was evaluated quantitatively. As a result of the evaluations, it was estimated that the arc voltage near the electrode surface rises linearly with the arc current and the power ?0.8 of the surface area, and that the voltage in the arc column rises as the 0.3 power of the pressure increase. We confirmed the validity of the estimated voltage characteristics by comparison with the generated voltage in an actual arc‐extinction chamber. The characteristics of the estimated voltage can provide effective guidelines for the design of arc extinguishing chambers. © 2013 Wiley Periodicals, Inc. Electr Eng Jpn, 186(1): 34–42, 2014; Published online in Wiley Online Library ( wileyonlinelibrary.com ). DOI 10.1002/eej.22487     

Long terminal linear alkyl group as internal crystallization accelerating moiety of poly(l-lactide)

Poly(l-lactide) (PLLA) polymers having terminal n-alkyl groups with a wide variety of lengths (C₀–C₂₂) were synthesized by ring-opening polymerization of l-lactide in the presence of coinitiators of l-lactic acid (C₀), 1-hexanol (C₆), 1-dodecanol (C₁₂), and 1-docosanol (C₂₂) and their segmental mobility and non-isothermal and isothermal crystallization behavior were investigated by differential scanning calorimetry (DSC) and wide-angle X-ray diffractometry (WAXD). Glass transition and cold crystallization temperatures of melt-quenched samples during heating decreased with an increase in the length of terminal n-alkyl groups. The enhanced PLLA segmental mobility and hydrophobic interaction-based accelerated PLLA nucleation by the presence of terminal long n-alkyl groups should have caused the accelerated non-isothermal and isothermal crystallization of PLLA segments traced by cold crystallization temperature during heating and by radial growth rate of spherulites, respectively. The crystallization accelerating effect became higher with the length of terminal n-alkyl groups. The effects of the length of terminal n-alkyl group on the crystalline growth mechanism of PLLA at the lowest crystallizable temperature was insignificant, whereas the effects of the length of terminal n-alkyl group on the nucleation mechanism of PLLA chains were significant and insignificant for PLLA having M_n of 6–7 × 10³ of 2 × 10⁴ g mol⁻¹, respectively. WAXD measurements revealed that the transition crystallization temperature at which crystalline modification changes from δ-form to α-form was affected by the length of terminal n-alkyl group for PLLA having M_n of 6–7 × 10³ g mol⁻¹, but was not altered by the length of terminal n-alkyl group for PLLA having M_n of 2 × 10⁴ g mol⁻¹.     

Development of a new heterojunction structure (ACJ -HIT) and its application to polycrystalline silicon solar cells

A new solar cell structure named HIT (Heterojunction with Intrinsic Thin layer) has been developed based on new artificially constructed junction (ACJ) technology. In this structure a non-doped a-Si thin layer was inserted between the p(a-Si)/n(c-Si) heterojunction, improving the output characteristics and achieving a conversion efficiency of 18.1%. This structure was applied to cast polycrystalline silicon solar cells of a practical size. A high conversion efficeincy of 13.6% was obtained with a cell size of 10 cm × 10 cm using various technologies, including hydrogen plasma passivation.     

Characteristics of a-Si solar cells prepared by the super chamber at a high substrate temperature

A new approach to high-performance a-Si solar cells was studied. a-Si films prepared at a high substrate temperature (> 250°C) have a higher absorption coefficient and a low Si H₂ bond density. the effect of deposition temperature on the open-circuit voltage (V_oc) has been investigated systematically for glass/SnO2 Ipin/metal and glass/metal/nip/indium tin oxide (ITO) structure a-Si solar cells. The V_oc is found to depend strongly on the thermal history of the p/i interface. A short-circuit current of 19.5 mA/cm⁻⁻² was achieved for an a-Si solar cell using an a-Si i-layer with a thickness of 4000 Å, which was prepared at a substrate temperature of 270°C.