The stability of duplexes involving AT and/or G4EtC base pairs is not dependent on their AT/G4EtC ratio content. Implication for DNA sequencing by hybridization

Sequencing by the recently reported hybridization technique requires the formation of DNA duplexes with similar stabilities. In this paper we describe a new strategy to obtain DNA duplexes with a thermal stability independent of their AT/GC ratio content. Melting data were acquired on 35 natural and 27 modified duplexes of a given length and of varying base compositions. Duplexes built with AT and/or G4EtC base pairs exhibit a thermal stability restrained to a lower range of temperature than that of the corresponding natural compounds (16 instead of 51 degrees C). The 16 degrees C difference in thermal stability observed between the least stable and the most stable duplex built with AT and/or G4EtC base pairs is mainly due to the sequence effect and not to their AT/G4EtC ratio content. Thus N -4-ethyl-2'-deoxycytidine (d4EtC) hybridizes specifically with natural deoxyguanosine leading to a G4EtC base pair whose stability is very close to that of the natural AT base pair. Oligonucleotide probes involving d4EtC can be easily prepared by chemical synthesis with phosphoramidite chemistry. Modified DNA targets were successfully amplified by random priming or PCR techniques using d4EtCTP, dATP, dGTP and dTTP in the presence of DNA polymerase. This new system might be very useful for DNA sequencing by hybridization.     

Retail yield and fabrication times for veal as influenced by purchasing options and merchandising styles

Twenty-nine selected styles of subprimals or sections of veal were obtained from a commercial facility to assist in the development of a support program for retailers. They were fabricated into bone-in or boneless retail cuts and associated components by trained meat cutters. Each style selected (n = 6) was used to generate mean retail yields and labor requirements, which were calculated from wholesale and retail weights and processing times. Means and standard errors for veal ribs consisting of five different styles (n = 30) concluded that style #2, 7-rib 4 (10 cm) x 4 (10 cm), had the lowest percentage of total retail yield (P < .05) owing to the greatest percentage of bone. Furthermore, rib style #2 required the longest total processing time (P < .05). Rib styles #3, 7-rib chop-ready, and #5, 6-rib chop ready, yielded the greatest percentage of total retail yield and also had the shortest total processing time (P < .05). Within veal loins, style #2, 4 (10 cm) x 4 (10 cm) loin kidney fat in, had the greatest percentage fat (P < .05). Loin styles #2 and #3, 4 (10 cm) x 4 (10 cm) loin special trimmed, generated more lean and fat trimmings and bone, resulting in lower percentage of total retail yields than loin style #1, 0 (0 cm) x 1 (2.5 cm) loin special trimmed (P < .05). Results indicated that bone-in subprimals and sections required more processing time if fabricated into a boneless end point. In addition, as the number of different retail cuts increased, processing times also increased.     

Abdominal T-cell non-Hodgkin's lymphoma of the gamma/delta type in a patient with selective immunoglobulin A deficiency

A 28-year-old man presented with selective immunoglobulin A deficiency and severe diarrhea responding to a gliadin-free diet. Biopsy samples of the small intestine showed dense T-cell infiltrations in the lamina propria and a slight increase of intraepithelial T-lymphocytes. No clonal rearrangement of the T-cell receptor c-beta chain genes was detectable by Southern blotting. Four years later, at the age of 32, the patient was hospitalized again with liver failure, abdominal lymphadenopathy, pancytopenia, and recurrent bacterial infections. Retrospective polymerase chain reaction analysis of formalin-fixed tissues of the intestinal biopsy samples obtained 4 years earlier showed monoclonal T-cell receptor gamma-chain gene rearrangement. Lymphoid cells of the peripheral blood showed an immunophenotype of CD3-positive gamma/delta T cells with a negativity for CD4 and CD8. A clonally rearranged T-cell receptor delta chain gene and a germline configuration of the c-beta chain genes was found by Southern blotting. Cytogenetics showed an abnormal karyotype with unbalanced translocations t(1;5) and t(9;13). The patient died of extensive lung infiltrations by gamma/delta T cells; autopsy showed a peripheral T-cell lymphoma of the gamma/delta type in the enlarged abdominal lymph nodes. This is the first report of an abdominal T-cell lymphoma of the gamma/delta type in a patient with selective immunoglobulin A deficiency.     

Synthesis of Ti5Si3-x Nb composites by the field-activated combustion method

The influence of an electric field on the combustion synthesis of Ti₅Si₃-x Nb composites (0≤ x ≤0.8) was investigated. Composites where x ≥ 0.8 can only be synthesized in the presence of a field. In the absence of a field, those systems where x=0.8 can result in a non-steady combustion wave causing an incomplete reaction. That is, an unstable wave propagates to the middle of the sample and then becomes extinguished. The wave velocity of the Ti₅Si₃-x Nb composites slightly increases with the imposition of an external electric field across the sample.     

小鹰500飞机获颁型号许可证

中国民用航空局向中航通飞华北飞机工业有限公司颁发了小鹰500飞机型号合格证（TC证）。这标志着中航通色华北公司将完全拥有了小鹰500飞机设计、制造知识产权。     

Consolidation and properties of binderless sub-micron tungsten carbide by field-activated sintering

The rapid sintering of nano-structured WC hard materials in a short time is introduced with a focus on the manufacturing potential of this spark plasma sintering process. The advantage of this process allows very quick densification to near theoretical density and prohibition of grain growth in nano-structured materials. A dense pure WC hard material with a relative density of up to 97.6% was produced with simultaneous application of 60 MPa pressure and electric current of 2800 A within 2 min. A larger current caused a higher rate of temperature increase and therefore a higher densification rate of the WC powder. The finer the initial WC powder size the higher is the density and the better are the mechanical properties. The fracture toughness and hardness values obtained were 6.6 MPa m^1/2 and 2480 kg/mm², respectively under 60 MPa pressure and 2800 A using 0.4 μm WC powder.     

Surgical management of total anomalous pulmonary venous drainage: impact of coexisting cardiac anomalies

BACKGROUND: Recent reports have cited improving results for surgical management of isolated total anomalous pulmonary venous drainage. Complex cases (with other cardiac anomalies) are less frequently reported and are associated with higher mortality. METHODS: Retrospective review identified 170 consecutive patients treated for total anomalous pulmonary venous drainage from 1982 to 1996: 44 cases were "complex" (with significant associated cardiac lesions) and 126 cases were "simple." RESULTS: Operative mortality for simple cases decreased from 26% to 8%, and mortality for complex cases remained constant at 52%. Age, size, and the presence of atrial isomerism were univariate predictors of mortality. Multivariable analysis identified only univentricular hearts and associated cardiac lesions as predictors of operative mortality. Pulmonary artery (n = 16) and arteriopulmonary (n = 7) shunting strategies for complex cases resulted in less than 30% long-term survival. CONCLUSIONS: Despite improvement in survival for simple cases, management of total anomalous pulmonary venous drainage with single-ventricle hearts or other associated cardiac lesions remains problematic.     

Immunology and adjuvant chemoimmunotherapy of breast cancer

Antibody against a breast carcinoma antigen was present in patients with breast carcinoma and other cancer more often (P less than .05) than in normal women. The incidence of antibody in women with breast carcinoma correlated with the presence or absence of gross tumor, and the titer of antibody paralleled the clinical course. These results suggest importance of a host-immune response to breast carcinoma. Fifty-seven patients with stage II carcinoma of the breast were entered into a prospective randomized adjuvant chemoimmunotherapy program of cyclophosphamide, methotrexate, and fluorouracil, and BCG vaccine +/- an irradiated allogeneic tumor cell vaccine. After 24 months of study, metastases occurred in two patients (3.5%) and a new primary carcinoma developed in the contralateral breast in two others, for an overall treatment failure rate of 7%. Adjuvant chemoimmunotherapy can delay early recurrence. Long-term follow-up is needed to assess the significance of these results.     

Biomimetic micropatterning of silica by surface-initiated polymerization and microcontact printing

Micropatterns of silica on a gold substrate were generated by a biomimetic approach, namely, the biosilicification of silicic acids. The procedure consists of three simple steps: pattern generation of a polymerization initiator, (BrC(CH(3))(2)COO(CH(2))(11)S)(2), by microcontact printing; surface-initiated, atom-transfer radical polymerization of 2-(dimethylamino)ethyl methacrylate (DMAEMA) from the patterned area; and polycondensation of silicic acids. The tertiary amine-containing polymer, pDMAEMA, aided in the spatially controlled polycondensation of silicic acids on surfaces in the presence of phosphate ions, and micropatterns of silica on a gold substrate were successfully generated in combination with the technique of microcontact printing. The procedure could be extended to the controlled fabrication of silica patterns with any size, shape, or thickness.     

Assessing the aggregation behaviour of iron oxide nanoparticles under relevant environmental conditions using a multi-method approach

Iron nanoparticles are becoming increasingly popular for the treatment of contaminated soil and groundwater; however, their mobility and reactivity in subsurface environments are significantly affected by their tendency to aggregate. Assessing their stability under environmental conditions is crucial for determining their environmental fate. A multi-method approach (including different size-measurement techniques and the DLVO theory) was used to thoroughly characterise the behaviour of iron oxide nanoparticles (Fe₂O₃NPs) under environmentally relevant conditions. Although recent studies have demonstrated the importance of using a multi-method approach when characterising nanoparticles, the majority of current studies continue to use a single-method approach.Under some soil conditions (i.e. pH 7, 10 mM NaCl and 2 mM CaCl₂) and increasing particle concentration, Fe₂O₃NPs underwent extensive aggregation to form large aggregates (>1 μm). Coating the nanoparticles with dissolved organic matter (DOM) was investigated as an alternative “green” solution to overcoming the aggregation issue instead of using the more commonly proposed polyelectrolytes. At high concentrations, DOM effectively covered the surface of the Fe₂O₃NPs, thereby conferring negative surface charge on the particles across a wide range of pH values. This provided electrostatic stabilisation and considerably reduced the particle aggregation effect. DOM-coated Fe₂O₃NPs also proved to be more stable under high ionic strength conditions. The presence of CaCl₂, however, even at low concentrations, induced the aggregation of DOM-coated Fe₂O₃NPs, mainly via charge neutralisation and bridging. This has significant implications in regards to the reactivity and fate of these materials in the environment.