Analysis of adhesive bonded composite lap joints with transverse stitching

The effect of transverse stitching on the stresses in the adhesive is investigated using an adhesive sandwich model with nonlinear adhesive properties and a transverse stitching model for adhesive bonded composite single-lap and double-lap joints. Numerical results indicate that, among all stitching parameters, thread pretension and stitch density have significant effect on the peel stresses in the adhesive; increase in the thread pretension and the stitch density leads to a decrease in peel stress in the adhesive, while an increase in other parameters generally results in a negligible reduction in peel stress. The effect of stitching was found to be negligible on the shear stresses in the adhesive. Thus it is concluded that stitching is effective for the joints where peel stresses are critical and ineffective for those where shear stresses are critical.     

BONSAI: 3D object recognition using constrained search

BONSAI, a model-based 3D object recognition system, is described. It identifies and localizes 3D objects in range images of one or more parts that have been designed on a computer-aided-design (CAD) system. Recognition is performed via constrained search of the interpretation tree, using unary and binary constraints (derived automatically from the CAD models) to prune the search space. Attention is focused on the recognition procedure, but the model-building, image acquisition, and segmentation procedures are also outlined. Experiments with over 200 images demonstrate that the constrained search approach to 3D object recognition has an accuracy comparable to that of previous systems     

Development of a heterogeneous microstructurally based finite element model for the prediction of forming limit diagram for sheet material

A heterogeneous finite element model with randomly distributed inhomogeneities has been developed for the determination of the forming limit diagram (FLD) for thin aluminum sheet material based on the prediction of localized necking. The strength difference between the inhomogeneities and the matrix is ascertained either from the fluctuation of the experimental stress-strain curve or from a micromechanical analysis that uses a representative particle field. By changing the specimen geometry and friction conditions, different stress states (or strain paths) are achieved. A plot of the critical Oyane fracture parameter is used to identify the limit strain state. Also, a plot of equivalent plastic strain rate is used to distinguish the boundary of intense shear bands and hence to identify where to take the measurement point. Both a plane stress model and a three-dimensional (3-D) model are adopted to predict the shear banding phenomenon and hence the FLD. The predicted FLD agrees well with the measurements from a recent round robin experimental FLD involving several independent research laboratories. The Taguchi method is applied to assess how the various parameters involved in the heterogeneous model affect the calculated forming limit strain.     

TEM study of microstructure development during low-cycle fatigue of an overaged Al-Mg-Si alloy

The evolution of dislocation structure during room-temperature, uniaxial, low-cycle fatigue of an overaged Al-Mg-Si alloy is studied. Ageing at 450°C produces a fine dispersion of Mg₂Si precipitate particles. During fully reversed strain-controlled cyclic tests, these fine particles restrict deformation to local regions and a stable dislocation substructure is developed early in fatigue life. Substructural observations of hardening and saturation by transmission electron microscopy reveal extensive dislocation band formation on Mg₂Si precipitate rods. Various microstructural features such as configuration of tangled dislocations, dislocation cells, precipitate morphologies, sizes, precipitate-free zones, etc., have been examined during cyclic hardening and saturation. The results have been analysed in terms of kinematic and isotropictype microstructural mechanisms.     

Plastic instability in dual-pressure tube-hydroforming process

The tube-hydroforming process has become an indispensable manufacturing technique in recent years. Successful tube hydroforming requires bulging to take place without causing any type of instability such as bursting, wrinkling or buckling. The dual-pressure tube-hydroforming process was introduced to achieve a favorable tri-axial stress state in the deformation process. In this paper, the effect of applying counter pressure on plastic instability of thin-walled tubes is analyzed. It is concluded that in dual-pressure tube hydroforming, the onset of plastic instability is delayed and the ductility of the metal is increased.     

Performance and buffering requirements of Internet protocols overATM ABR and UBR services

ATM networks are quickly being adopted as backbones over various parts of the Internet. This article studies the dynamics and performance of the TCP/IP protocol over the ABR and UBR services of ATM networks. Specifically the buffering requirements in the ATM switches as well as the ATM edge devices. It is shown that with a good switch algorithm, ABR pushes congestion to the edges of the ATM network while UBR leaves it inside the ATM portion. As a result, the switch ABR buffer requirement for zero-packet-loss high-throughput TCP transmission is a sublinear function of the number of TCP connections