A kinetic study of multi-walled carbon nanotube synthesis by catalytic chemical vapor deposition using a Fe-Co/Al2O3 catalyst

A kinetic study was performed to describe the initial specific rate of multi-walled carbon nanotube synthesis by catalytic chemical vapor deposition (CCVD) on a bimetallic cobalt-iron catalyst at high temperature using ethylene decomposition to solid carbon and gaseous hydrogen. The study uses a mass spectrometer that allows reaction rate to be inferred from the exhaust gas composition measurements. The aim is to obtain a better understanding of the elementary steps involved in the production of carbon nanotubes so as to derive phenomenological kinetic models in agreement with experimental data. The best models assume the elimination of the first hydrogen atom from adsorbed ethylene as rate determining step and involve a hydrogen adsorption weak enough to be neglected. It was proved that hydrogen partial pressure has no influence on initial reaction rate of carbon nanotube synthesis with the catalyst used for this study. Activation energy and ethylene adsorption enthalpy were found to be equal to around 130 and −130 kJ mol⁻¹, respectively.     

Form finding methodology for force-modelled anticlastic shells in glass fibre textile reinforced cement composites

The reinforcement of a specifically developed fine grained cement matrix with glass fibre textiles in high fibre volume fractions creates a fire safe composite that has-besides its usual compressive strength-an important tensile capacity and omits the need for any steel reinforcement. Strongly curved shells made of textile reinforced cement composites (TRC) can cover medium (up to 15 m) span spaces with three times smaller shell thicknesses than conventional steel-reinforced concrete shells. This paper presents a methodology to generate force-modelled anticlastic shell shapes that exploit both the tensile and compressive load carrying capacities of TRC. The force-modelling is based on the dynamic relaxation form finding method developed for gravity (in this case self-weight) loaded systems. The potential of the presented methodology to develop structurally sound anticlastic shell shapes is illustrated by four case studies.     

Chiral switching by spontaneous conformational change in adsorbed organic molecules

Self-assembly of adsorbed organic molecules is a promising route towards functional surface nano-architectures, and our understanding of associated dynamic processes has been significantly advanced by several scanning tunnelling microscopy (STM) investigations. Intramolecular degrees of freedom are widely accepted to influence ordering of complex adsorbates, but although molecular conformation has been identified and even manipulated by STM, the detailed dynamics of spontaneous conformational change in adsorbed molecules has hitherto not been addressed. Molecular surface structures often show important stereochemical effects as, aside from truly chiral molecules, a large class of so-called prochiral molecules become chiral once confined on a surface with an associated loss of symmetry. Here, we investigate a model system in which adsorbed molecules surprisingly switch between enantiomeric forms as they undergo thermally induced conformational changes. The associated kinetic parameters are quantified from time-resolved STM data whereas mechanistic insight is obtained from theoretical modelling. The chiral switching is demonstrated to enable an efficient channel towards formation of extended homochiral surface domains. Our results imply that appropriate prochiral molecules may be induced (for example, by seeding) to assume only one enantiomeric form in surface assemblies, which is of relevance for chiral amplification and asymmetric heterogenous catalysis.     

The role of electrical current mode in calcium carbonate deposition on conductive carbon nanofiber–epoxy coating

Calcium carbonate is one of the most common scaling minerals. In this paper we have used different electrical current modes (direct current [DC], pulsed DC, and alternating current [AC]) to control the amount, morphology, and distribution of calcium carbonate deposit on electroconductive epoxy/carbon nanofiber (CNF) coating. The effect of different current modes on surface scaling was visualized using scanning electron microscopy. It has been shown that both AC and DC anodic polarization limited scale deposition on epoxy/CNF coated surfaces, although the mechanisms of scale inhibition during AC and DC polarization were different. DC polarization of the coating at +2 V resulted in the smallest scale buildup without leading to coating degradation, while DC polarization at potentials as high as +5 V caused the coating to degrade. Interestingly, application of pulsed DC with high pulse frequency (50 Hz) inhibited the degradation. The type of current applied affected also the morphology of the precipitate at the cathode. The results presented in this work show, for the first time, how different modes of electrical current applied to electroconductive composite coatings can be used to control the morphology and distribution of calcium carbonate scale, and how the organic coating degradation at high polarization potentials can be avoided.     

改进压缩机使炼油厂的基准转化成现实的节约

正炼油厂比以往任何时候都需要充分利用资产。顾问给出的行业基准对于通盘考量是有价值的-但是如何在工厂层面上推出真正的改进?往复压缩机可能是合适的选择。作为炼油厂氢供应的关键,压缩机在性能和可靠性方面有很大的改进空间。作为炼油厂资本设备的主要项目,维护成本与重置价值的比率从2.5%下降至1.5%是值得庆祝的。新方法可以对往复压缩机的性能进行基准测试和改进,这样的结果在大多数设施中是完全可以实现的。     

The Effect of Water on the Activity and Selectivity for γ-Alumina Supported Cobalt Fischer–Tropsch Catalysts with Different Pore Sizes

The effect of water on the activity and selectivity for a series of γ-Al₂O₃ supported cobalt Fischer–Tropsch catalysts has been studied in an isothermal fixed-bed reactor at T = 483 K, P = 20 bar, and H₂/CO = 2.1. The catalysts were produced applying incipient wetness impregnation and consisted of 20 wt.% cobalt and 0.5 wt.% rhenium deposited on γ-Al₂O₃ supports with different pore characteristics. For the narrow-pore catalysts, addition of water corresponding to an inlet partial pressure ratio of P_H2O/P_H2 = 0.4 reduced the reaction rates. In contrast, for a catalyst with larger pores the same water pressure increased the reaction rates. For all catalysts, water amounts equal to P_H2O/P_H2 = 0.7 at the reactor inlet suppressed the reaction rates and led to permanent deactivation. The addition of water increased the C₅₊ selectivity and decreased the CH₄ selectivity for all catalysts. The pore characteristics seem to determine the effect of water on the rates.     

Alternating Current Electrophoretic Deposition of Antibacterial Bioactive Glass-Chitosan Composite Coatings

Alternating current (AC) electrophoretic deposition (EPD) was used to produce multifunctional composite coatings combining bioactive glass (BG) particles and chitosan. BG particles of two different sizes were used, i.e., 2 μm and 20–80 nm in average diameter. The parameter optimization and characterization of the coatings was conducted by visual inspection and by adhesion strength tests. The optimized coatings were investigated in terms of their hydroxyapatite (HA) forming ability in simulated body fluid (SBF) for up to 21 days. Fourier transform infrared (FTIR) spectroscopy results showed the successful HA formation on the coatings after 21 days. The first investigations were conducted on planar stainless steel sheets. In addition, scaffolds made from a TiAl4V6 alloy were considered to show the feasibility of coating of three dimensional structures by EPD. Because both BG and chitosan are antibacterial materials, the antibacterial properties of the as-produced coatings were investigated using E. coli bacteria cells. It was shown that the BG particle size has a strong influence on the antibacterial properties of the coatings.     

Lithological and pedological influences on the magnetic susceptibility of soil: their consideration in magnetic pollution mapping

Magnetic susceptibility measurements are widely used to map and monitor the heavy metal pollution of soils. However, the magnetic properties of soils are influenced significantly by the bedrock lithology and soil-forming processes. Therefore, a main challenge in the data interpretation is to filter out the anthropogenic pollution signal. In this study we address this problem by analysing susceptibility values, heavy metal concentrations, as well as pedological parameters in a large soil data set from the eastern segment of Austria, covering a wide range of different lithologies and soil types. The statistic assessment demonstrates an influence of lithology and soil type on the magnetic susceptibility signal. Therefore anomalies are defined in sub sets of different soil types separately. Three different methods were applied to detect susceptibility anomalies: the median absolute deviation method, the boxplot method, and the population modelling method. These methods evaluate topsoil data only and can therefore also be applied to field measurements of magnetic susceptibility. The results were compared to the conventional method of calculating the difference of topsoil and subsoil susceptibility. All three approaches identify the main anomalies in the study area and are successful in circumventing the problem of erroneous anomaly definition due to pedological processes. However, knowledge of the lithological background is still necessary for a meaningful interpretation and can only be substituted by a large amount of data. The tested methods lead to thresholds of different height and therefore act as filters of different strength for the definition of anomalies.     

Gallium phosphide nanowires as a substrate for cultured neurons

Dissociated sensory neurons were cultured on epitaxial gallium phosphide (GaP) nanowires grown vertically from a gallium phosphide surface. Substrates covered by 2.5 microm long, 50 nm wide nanowires supported cell adhesion and axonal outgrowth. Cell survival was better on nanowire substrates than on planar control substrates. The cells interacted closely with the nanostructures, and cells penetrated by hundreds of wires were observed as well as wire bending due to forces exerted by the cells.