Selective determination of urea using urease immobilized on ZnO nanowires

Well-aligned zinc oxide (ZnO) nanowire arrays were fabricated on gold-coated plastic substrates using a low-temperature aqueous chemical growth (ACG) method. The ZnO nanowire arrays with 50–130 nm diameters and ∼1 μm in lengths were used in an enzyme-based urea sensor through immobilization of the enzyme urease that was found to be sensitive to urea concentrations from 0.1 mM to 100 mM. Two linear sensitivity regions were observed when the electrochemical responses (EMF) of the sensors were plotted vs. the logarithmic concentration range of urea from 0.1 mM to 100 mM. The proposed sensor showed a sensitivity of 52.8 mV/decade for 0.1–40 mM urea and a fast response time less than 4 s was achieved with good selectivity, reproducibility and negligible response to common interferents such as ascorbic acid and uric acid, glucose, K⁺ and Na⁺ ions.     

Improved assignment with ant colony optimization for multi-target tracking

Detecting and tracking ground targets is crucial in military intelligence in battlefield surveillance. Once targets have been detected, the system used can proceed to track them where tracking can be done using Ground Moving Target Indicator (GMTI) type indicators that can observe objects moving in the area of interest. However, when targets move close to each other in formation as a convoy, then the problem of assigning measurements to targets has to be addressed first, as it is an important step in target tracking. With the increasing computational power, it became possible to use more complex association logic in tracking algorithms. Although its optimal solution can be proved to be an NP hard problem, the multidimensional assignment enjoyed a renewed interest mostly due to Lagrangian relaxation approaches to its solution. Recently, it has been reported that randomized heuristic approaches surpassed the performance of Lagrangian relaxation algorithm especially in dense problems. In this paper, impelled from the success of randomized heuristic methods, we investigate a different stochastic approach, namely, the biologically inspired ant colony optimization to solve the NP hard multidimensional assignment problem for tracking multiple ground targets.     

A novel hybrid immune algorithm for global optimization in design and manufacturing

This paper presents a new hybrid optimization approach based on immune algorithm and hill climbing local search algorithm. The purpose of the present research is to develop a new optimization approach for solving design and manufacturing optimization problems. This research is the first application of immune algorithm to the optimization of machining parameters in the literature. In order to evaluate the proposed optimization approach, single objective test problem, multi-objective I-beam and machine-tool optimization problems taken from the literature are solved. Finally, the hybrid approach is applied to a case study for milling operations to show its effectiveness in machining operations. The results of the hybrid approach for the case study are compared with those of genetic algorithm, the feasible direction method and handbook recommendation.     

Effects of combined wrist deviation and forearm rotation on discomfort score

The aim of the study was to examine the pattern of the change in discomfort for combined wrist deviation and forearm rotation as joint angles increased away from neutral in a repetitive task. There were five levels of wrist deviation (neutral, 35% and 55% of the range of motion (ROM) in radial and ulnar deviation) and five levels of forearm rotation (neutral, 30% and 60% of the ROM in pronation and supination). Twenty-five participants performed a repetitive flexion task with a force of 10 N +/- 1 N at a frequency of 15 exertions per min, with replication after 1 week for six of the participants. A visual analogue scale was used for recording the discomfort scores. Repeated measures analysis of covariance with the Greenhouse-Geisser correction, where necessary, was used on transformed values of the discomfort scores. Grip test endurance time at 50% of maximum voluntary contraction was included as a covariate. Wrist deviation (p = 0.007) and forearm rotation (p = 0.001) were found to have significant effects. Interactions of the main factors were not significant and nor was the covariate. Quadratic regression equations were derived and were used to generate iso-discomfort contours, which show a useful area of low discomfort around the central neutral zone of wrist postures, but with steep increases in discomfort at the extreme combinations of wrist ulnar/radial deviation with forearm pronation/supination. Discomfort equations and contours, showing wrist and forearm postures, which are either acceptable or potentially injurious, are useful for the design of industrial tools, machine controls and workspaces. Reference to these can help to reduce the risk of musculoskeletal injury associated with the tasks or tools by avoiding poor postures with unacceptable deviations from neutral posture.     

Drag and lift coefficients of inclined finite circular cylinders at moderate Reynolds numbers

The flow around two-dimensional cylinders at moderate Reynolds numbers has been much studied, both for cylinders perpendicular to the flow and for cylinders yawed to the flow. In contrast, yawed finite aspect ratio cylinders have received little attention. In this article we describe computer simulations of cylinders with aspect ratios 2  L/D  20 yawed at angles 0°  α  90° relative to a free stream. The simulations were carried out for Reynolds numbers in the range 1  Re  40. The simulations show that the Independence Principle [Zdravkovich MM. Flow around circular cylinders, vol. 2: applications. New York: Oxford University Press; 2003[1]] is not accurate for α  45°. We have also found that for all aspect ratios, the ratio of the lift to drag force reaches a maximum for 40° < α < 50°. Finally, we present C_L and C_D relationships as best curve fits to computational data.     

Genetic programming-based attenuation relationship: An application of recent earthquakes in turkey

This study investigates an application of genetic programming (GP) for the prediction of peak ground acceleration (PGA) using strong-ground-motion data from Turkey. The input variables in the developed GP model are the average shear-wave velocity, earthquake source to site distance and earthquake magnitude, and the output is the PGA values. The proposed GP model is based on the most reliable database compiled for earthquakes in Turkey. The results show that the consistency between the observed PGA values and the predicted ones by the GP model yields relatively high correlation coefficients (R²=0.75). The proposed model is also compared with an existing attenuation relationship and found to be more accurate.     

Dynamic hybrid automatic repeat request (DHARQ) for WiMAX – Mobile multihop relay using adaptive power control

Wireless multihop network is currently attracting much attention as a new wireless broadband access technology due to numerous benefits. This work proposes a power control scheme for WiMAX multihop relay system. In contrast to existing power control and optimization approaches, our proposed method uses an adaptive Channel Quality Measurement for a relay station to reduce interferences to other mobile station (MS) or relay station (RS) within the same cell and hence increase the number of hops per link and consequently maximize the spatial reuse. The proposed power control is applied to a new dynamic HARQ algorithm for adaptive channel quality enhancement. Simulation results have indicated that the proposed approach achieves superior BER/PER performance enhancement in comparison to previous related works.     

Identifying high perceived value practices of CMMI level 2: An empirical study

ObjectiveIn this paper, we present findings from an empirical study that was aimed at identifying the relative “perceived value” of CMMI level 2 specific practices based on the perceptions and experiences of practitioners of small and medium size companies. The objective of this study is to identify the extent to which a particular CMMI practice is used in order to develop a finer-grained framework, which encompasses the notion of perceived value within specific practices.MethodWe used face-to-face questionnaire based survey sessions as the main approach to collecting data from 46 software development practitioners from Malaysia and Vietnam. We asked practitioners to choose and rank CMMI level 2 practices against the five types of assessments (high, medium, low, zero or do not know). From this, we have proposed the notion of ‘perceived value’ associated with each practice.ResultsWe have identified three ‘requirements management’ practices as having a ‘high perceived value’. The results also reveal the similarities and differences in the perceptions of Malaysian and Vietnamese practitioners with regard to the relative values of different practices of CMMI level 2 process areas.ConclusionsSmall and medium size companies should not be seen as being “at fault” for not adopting CMMI – instead the Software Process Improvement (SPI) implementation approaches and its transition mechanisms should be improved. We argue that research into “tailoring” existing process capability maturity models may address some of the issues of small and medium size companies.     

Supply chain network design using an integrated neuro-fuzzy and MILP approach: A comparative design study

In this study, an integrated supply chain (SC) design model is developed and a SC network design case is examined for a reputable multinational company in alcohol free beverage sector. Here, a three echelon SC network is considered under demand uncertainty and the proposed integrated neuro-fuzzy and mixed integer linear programming (MILP) approach is applied to this network to realize the design effectively. Matlab 7.0 is used for neuro-fuzzy demand forecasting and, the MILP model is solved using Lingo 10.0. Then Matlab 7.0 is used for artificial neural network (ANN) simulation to supply a comparative study and to show the applicability and efficiency of ANN simulation for this type of problem. By evaluating the output data, the SC network for this case is designed, and the optimal product flow between the factories, warehouses and distributors are calculated. Also it is proved that the ANN simulation can be used instead of analytical computations because of ensuring a simplified representation for this method and time saving.